المرجع فى شروحات كسر السرعة BIOS TEMPLATE لمعظم انواع اللوحات

سوف نقوم بمساعدة الاعضاء فى عمليات كسر السرعة من خلال BIOS عن طريق وضع TEMPLATE لمعظم او اشهر اللوحات
وذلك لتسهيل عملية الشرح من خلال هذه ال قوالب
و ستكون هذه القوالب على الوضع الافتراضى كل ما نقوم به هو نسخها الى الموضوع مع ذكر الاتى
1- المعالج - النوع - رقم الموديل
2- الذواكر - النوع - الموديل - التردد - الناقل
لكى تسهل على الاخوة المحترفين عملية الشرح
و سوف يتم تحديث هذه القوالب بأستمرار

سوف نبدأ اولا بلوحات GIGABYTE

بالنسبة للوحات X58

كود PHP:

Advanced CPU Features:

كود PHP:

[CENTER]CPU Clock Ratio ................................ [20x] Intel(R) Turbo Boost Tech .................. [Enabled] CPU Cores Enabled ............................ [All] CPU Multi Threading .......................... [Enabled] CPU Enhanced Halt (C1E) ................... [Disabled] C3/C6/C7 State Support .................... [Disabled] CPU Thermal Monitor ......................... [Enabled] CPU EIST Function ............................ [Disabled] Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs Bi-Directional PROCHOT ..................... [Enabled] Uncore & QPI Features: QPI Link Speed .............................. x36 Uncore Frequency ..........................  (Always 2x memory Multi or 2x +1) Isonchronous Frequency ..................[Enabled] Standard Clock Control: Base Clock (BCLK) Control ................ [Enabled] BCLK Frequency (MHz) ..................... PCI Express Frequency (MHz) ........... [100] C.I.A.2 [Disabled] Advanced Clock Control: CPU Clock Drive ..............................[800mV] PCI Express Clock Drive ................... [900mV] CPU Clock Skew ............................. [0ps] IOH Clock Skew ............................. [0ps] Advanced DRAM Features: Performance Enhance ...................... [Standard] Extreme Memory Profile (X.M.P) ......... [Disabled] System Memory Multiplier (SPD) ........ [AUTO] DRAM Timing Selectable (SPD) .......... [Manual] Channel A + B + C Channel A Timing Settings: ##Channel A Standard Timing Control## CAS Latency Time ...................... tRCD ....................................... tRP ......................................... tRAS ....................................... ##Channel A Advanced Timing Control## tRC ........................................  (Should be = tRAS + tRP or above for stability) tRRD ....................................... tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4) tWR ........................................ tWTP .......................................   (tWTP Must = tWR + tWL + 4) tWL ........................................    (tWL Must be CAS Latency -1) tRFC ....................................... tRTP ....................................... tFAW ...................................... Command Rate (CMD) ................ ##Channel A Misc Timing Control## Round Trip Latency ................... B2B CAS Delay .......................... Advanced Voltage Control: CPU Load Line Calibration ................. [Disabled] CPU Vcore ............................... QPI/VTT Voltage 1.150v ............ CPU PLL 1.800v ....................... MCH/ICH PCIE 1.500v ........................... QPI PLL 1.100v ....................... IOH Core 1.100v ..................... ICH I/O 1.500v ....................... ICH Core 1.1v ........................ DRAM DRAM Voltage 1.500v .............. DRAM Termination 0.750v [AUTO] Ch-A Data VRef. 0.750v [AUTO] Ch-B Data VRef. 0.750v [AUTO] Ch-C Data VRef. 0.750v [AUTO] Ch-A Address VRef. 0.750v [AUTO] Ch-B Address VRef. 0.750v [AUTO] Ch-C Address VRef. 0.750v [AUTO][/CENTER]

اما اللوحات P55 & P57

كود PHP:

Advanced Frequency Settings:

كود PHP:

[CENTER] CPU Clock Ratio 21x Advanced Core Features  [Press Enter]: Intel(R) Turbo Boost Tech................[Disabled] CPU Cores Enabled........................[All] CPU Multi-Threading......................[Disabled] CPU Enhanced Halt (C1E)..................[Auto] C3/C6/C7 State Support...................[Auto] CPU Thermal Monitor......................[Auto] CPU EIST Function........................[Auto] Bi-Directional PROCHOT...................[Auto] QPI Clock Ratio..........................[Auto] QPI Link Speed........................[x] Uncore Clock Ratio....................[18x] Uncore Frequency.........................3600MHz >>>>>   Standard Clock Control <<<<< Base Clock (BCLK) Control................[Enabled] BCLK Frequency ..........................[200] Extreme Memory Profile (X.M.P.)..........[Disabled] System Memory Multiplier (SPD)...........[Disabled] Memory Frequency (MHz)................2000 PCI Express Frequency (MHz)..............[Auto] C.I.A.2..................................[Disabled] >>>>>   Advanced Clock Control   <<<<< CPU Clock Drive..........................[ 800mV] PCI Express Clock Drive..................[ 900mV] CPU Clock Skew...........................[    0ps] Advanced Memory Settings: Extreme Memory Profile (X.M.P.)..........[Disabled] System Memory Multiplier (SPD)...........[10.0] Memory Frequency (MHz)................2000 Performance Enhance   (SPD)............. [Turbo] DRAM Timing Selectable (SPD)............ [Expert] Profile DDR Voltage .................. Profile QPI Voltage .................. Channel Interleaving.....................[Auto] Rank Interleaving........................[Auto] >>>>>   Channel A & B Channel A Timing Settings            [Press Enter]: Cas Latency Time........................[8] tRCD....................................[8] tRP.....................................[9] tRAS...................................[24] >>>>>   Advanced Timing Control tRC....................................[Auto] tRRD...................................[Auto] tWTR...................................[Auto] tWR....................................[Auto] tWTP...................................[Auto] tWL....................................[Auto] tRFC...................................[Auto] tRTP...................................[Auto] tFAW...................................[Auto] Command Rate (CMD).................. 1 [1] >>>>>   Misc Timing Control B2B Cas Delay..........................[Auto] Round Trip Latency.....................[Auto] Channel A Turnaround Settings [Press Enter]: Different DIMMs........................[Auto] Different DIMMs........................[Auto] On The Same Rank.......................[Auto] >>>>>   Channel A Writes Followed By Writes Different DIMMs........................[Auto] Different DIMMs........................[Auto] On The Same Rank.......................[Auto] Advanced Voltage Settings: ******Mother Board Voltage Control ****** Voltage Types............Normal......Current -------------------------------------------- >>> CPU Load Line Calibration...................[Level 2] CPU Vcore..................1.19375v..[1.xv] QPI/VTT Voltage..........1.100v.....[1.x00v] >>> MCH/ICH PCH Core....................1.050v.....[Auto] CPU PLL......................1.800v.....[Auto] >>> DRAM DRAM Voltage..............1.500v.....[1.660v] DRAM Termination.........0.750v.....[Auto] Ch-A Data VRef............0.750v.....[Auto] Ch-A Data VRef............0.750v.....[Auto] Ch-B Data VRef............0.750v.....[Auto] Ch-B Data VRef............0.750v.....[Auto] Miscellaneous Settings:[/SIZE] Isochronous Support....................[Enabled] Virtualisation technology..............[Enabled] USB Storage Detect ....................[Disabled] Located In Integrated Peripherals Page[/CENTER]

P45 / P43

وأيضا متشابهة الى حد ما مع G45/G43

كود PHP:

MB Intelligent Tweaker(M.I.T.)

كود PHP:

[CENTER]Robust Graphics Booster ...............: Auto or Fast CPU Clock Ratio ..........................: Fine CPU Clock Ratio.....................:.0 CPU Frequency ...........................: Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: Mhz PCI Express Frequency (Mhz) .........:Set to 100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: <<< 800 PCI Express Clock Drive.................: <<< 900 CPU Clock Skew (ps)....................: <<< MCH Clock Skew (ps)...................: <<< DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............: Memory Frequency (Mhz) ..............: DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................ tRCD ......................................... tRP'........................................... tRAS.......................................... Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go Advanced Timing Control tRRD........................................... tWTR.......................................... tWR............................................ tRFC........................................... tRTP........................................... Command Rate (CMD) ....................:2 Driving Strength Profiles Driving Strength ............................ Channel A Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto  ps Dimm2 Clock Skew Control...............:Auto  ps Channel B Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto  ps Dimm2 Clock Skew Control...............:Auto  ps Motherboard Voltage Control CPU CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly MCH/ICH MCH Core…………….....1.100V...........: << MCH Reference….…….0.760V...........; <<< Leave MCH/DRAM Ref.…......0.900V...........: <<< Leave ICH I/O……………….....1.500V............: <<< Leave ICH Core…………...……1.100V............: <<< Leave DRAM DRAM Voltage ……....1.800V............: DRAM Termination .…0.900V............: <<< Leave Channel A Reference 0.900V............: <<< Leave Channel B Reference 0.900V............: <<< Leave Advanced Settings Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC Integrated Peripherals Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB[/CENTER]

X35 / X38 / X48

و ايضا تتشابه مع P31/G31/965P

كود PHP:

Robust Graphics Booster___________ [Auto]

كود PHP:

[CENTER]CPU Clock Ratio ____________ [8] Fine Clock Ratio ____________[0.5] CPU Host Clock Control_ [Enabled] CPU Host Frequency (MHz)__________ [450] PCI Express Frequency (Mhz)_______ [100] C.I.A. 2__________________________ [Disabled] System Memory Multiplier (SPD)____ [2.00] DRAM Timing Selectable_______ SPD __ [Manual] Performance Enhance = [Standard] CAS Latency Time________________ Dram RAS# to CAS# Delay_________ Dram RAS# Precharge Delay_______ Precharge Delay (tRAS)__________ ACT to ACT Delay (tRRD)_________ Rank Write to READ Delay________ Write to Precharge Delay_________ Refresh to ACT Delay______________ Read to Precharge Delay__________ Static tRead Value_______________ Static tRead Phase Adjust________ [Auto] CPU/PCIEX Clock Driving Control [800mV] CPU Clock Skew Control [normal] GMCH Clock Skew Control [Normal] System Voltage Control____ [Manual] DDR2 OverVoltage Control__ [+0.300V] PCI-E OverVoltage Control_ [+0.1V] FSB OverVoltage Control___ [+0.1V] (G)MCH OverVoltage Control [+0.1V] CPU Voltage Control_______ [1.25] Limit CPUID Max. to 3.....................: [Disabled] No-Execute Memory Protect............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support....................: [Disabled] x C4/C4E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.........................: [Disabled] Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC Integrated Peripherals Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB[/CENTER]

ننتقل الى Asus Rampage III Extreme

كود PHP:

Target CPU Frequency        2666MHz Target DRAM Frequency        1603MHz LN2 Mode:            Disabled*** QPI Loadline Calibration:    Enabled ***Sync Mode            [Enabled] AI Overclock Tuner        [Manual] OC From CPU level Up        [Auto] CPU Ratio Setting        [20.0] CPU Turbo Power Limit        [Disabled] >CPU Configuration- CPU Ratio Setting        [20.0] C1E Support            [Enabled] Hardware Prefetcher        [Enabled] Adjacent Cache Line Prefetcher    [Enabled] Intel(R) Virtualiyation Tech    [Enabled] CPU TM Function            [Disabled] Execute Disable Bit        [Enabled] Intel(R) HT Technology        [Enabled] Active Processor Cores        [All] A20M                [Disabled] Intel(R) SpeedStep(TM) Tech    [Enabled] Intel(R) C-STATE Tech        [Enabled] C State package limit setting    [Auto]- BCLK Frequency            [133] PCIE Frequency            [100] DRAM Frequency            [1603] UCLK Frequency            [3209] QPI Link Data Rate        [AUTO] Memory Configuration Protect    [Disabled] >DRAM Timing Control CAS# Latency              9    [9] RAS# to CAS# Delay          9    [9] RAS# PRE Time              9    [9] RAS# ACT Time             24    [24] RAS# to RAS# Delay          6    [AUTO] REF Cycle Time             110    [110] WRITE Recovery Time         15    [15] READ to PRE Time          9    [9] FOUR ACT WIN Time         31    [31] Back-To-BackCAS# Delay          0    [Auto] Timing Mode             1N    [1N] Round Trip Latency on CHA        [AUTO] Round Trip Latency on CHB        [AUTO] Round Trip Latency on CHC        [AUTO] WRITE To READ Delay(DD)          8    [Auto] WRITE To READ Delay(DR)          8    [Auto] WRITE To READ Delay(SR)         18    [Auto] READ To WRITE Delay(DD)          7    [Auto] READ To WRITE Delay(DR)          7    [Auto] READ To WRITE Delay(SR)          7    [Auto] READ To READ Delay(DD)          7    [Auto] READ To READ Delay(DR)          6    [Auto] READ To READ Delay(SR)          4    [Auto ]WRITE To WRITE Delay(DD)      8    [Auto] WRITE To WRITE Delay(DR)      8    [Auto] WRITE To WRITE Delay(SR)     18    [Auto] CPU Differential Amplitude    [Auto] CPU Clock Skew            [Auto] IOH Clock Skew            [Auto] Extreme Engine Digi+ Digi+ PWR Mode   [T-Balanced] PWR Volt. Control        [Auto] Load-Line Calibration        [Full] CPU Voltege OCP            [Enabled] CPU PWM Frequency        [1000kHz] Extreme OV            [Disabled] Extreme OC            [Auto] CPU Voltage        1.250    [1.25000] CPU PLL Voltage     1.812    [Auto] QPI/DRAM Core Voltage    1.350    [1.35000] DRAM Bus Voltage    1.654    [Auto] >DRAM REF Voltages DRAM DATA REF Voltage on CHA    [Auto] DRAM CTRL REF Voltage on CHA    [Auto] DRAM DATA REF Voltage on CHB    [Auto] DRAM CTRL REF Voltage on CHB    [Auto] DRAM DATA REF Voltage on CHC    [Auto] DRAM CTRL REF Voltage on CHC    [Auto] IOH Voltage        1.244    [Auto] IOH PCIE Voltage    1.508    [Auto] ICH Voltage        1.111    [Auto] ICH PCIE Voltage        [Auto] Spread Spectrum Control CPU Spread Spectrum        [Disabled] DRAM Spread Spectrum        [Disabled] ***on-board jumper dependant

سوف يتم اضافة المزيد من القوالب تباعا