رد: Cisco IPS Recovery image
https://www.4shared.com/file/shlF8I7P/IDS-4235.html
To unzip use 7zip Package.
Sensor Username : cisco
Sensor Password : junisys.in
Change your RAM size to 1024 on IDS Setting Field
رد: Cisco IPS Recovery image
معلش أنا كنت عايز أعرف اشغل الفيلات اللي حضرتك بعتهالي أزاي
يعني دي أيميج شغاله على طول و لآأيه؟
أنا لم الضغط أتفك لقيتها 4.5 جيجا
برجاء التوضيح
رد: Cisco IPS Recovery image
1- open gns3
go eidit > preferences > Qemu >IDS
2- fill the gabe
Identifier name IDS
go the location where you extracted the image and put
hda
hdb
ram 1024
Qemu option -smbios type=1,product=IDS-4215 chane it to 4235
3- save > apply >ok
4- delete the temp it is important
5- open gns3 and choose ids and start
username cisco
password junisys.in
it work find need 2 ram atleast
رد: Cisco IPS Recovery image
هلا اخى الحبيب جزاك الله خيرا وانفع بمك المسلمين
انا بتتطلعلى الرساله دى بعد ما بحط الباسورد
هل من حل
***LICENSE NOTICE***
There is no license key installed on the unknown.
The system will continue to operate with the currently installed
signature set. A valid license must be obtained in order to apply
signature updates. Please go to https://www.cisco.com/go/license
to obtain a new license or install a license.
رد: Cisco IPS Recovery image
اقتباس:
المشاركة الأصلية كتبت بواسطة neelk
1- open gns3
go eidit > preferences > Qemu >IDS
2- fill the gabe
Identifier name IDS
go the location where you extracted the image and put
hda
hdb
ram 1024
Qemu option -smbios type=1,product=IDS-4215 chane it to 4235
3- save > apply >ok
4- delete the temp it is important
5- open gns3 and choose ids and start
username cisco
password junisys.in
it work find need 2 ram atleast
جزاك الله خيرا أخي
أولا أنا الباسورد اللي حاطه مشتغلش معايا
اللي اشتغل
user:cisco
password:cisco
وطلب مني تغيير الباسورد
المهم بعد ما غيرته طلعتلي الرساله اللي طلعت للمهندس محمد النادي
رد: Cisco IPS Recovery image
الان اعمل على ips بنفس الطريقة المشروحة على windows x
المرجو مراجعة الخطوات بدفة من جديد مع مراعات,
open run insert
%Temp%
clear all temp
work find for me with IDM
رد: Cisco IPS Recovery image
نفس المشكله برده يا باشمهندس
هو حضرتك جربتها واشتغلت معاك ؟
***LICENSE NOTICE***
There is no license key installed on the unknown.
The system will continue to operate with the currently installed
signature set. A valid license must be obtained in order to apply
signature updates. Please go to https://www.cisco.com/go/license
to obtain a new license or install a license.
رد: Cisco IPS Recovery image
مهم جدا
First Clear the Temp Folder and GNS3 Working Directory
شغال معى عال العال
ايضا اخى محمد لكسب الوقت يوجد asdm demo mode يعمل بدون router
ممكن تنزلو من سيسكو , دى نسخة لم اقم بتجربتها
asdm-demo-621
https://www.4shared.com/file/ahjca1b...-demo-621.html
https://www.4shared.com/file/DvFdJGtf/asdm-demo-631.htm
|
رد: Cisco IPS Recovery image
جزاك الله خيرا يا اخى الحبيب
بس ازاى ادخل عليه من IDM
وانا ما اعرفش ال ip
رد: Cisco IPS Recovery image
اقتباس:
المشاركة الأصلية كتبت بواسطة م/محمد النادى
جزاك الله خيرا يا اخى الحبيب
بس ازاى ادخل عليه من IDM
وانا ما اعرفش ال ip
حضرتك ستقوم باعداده من CLI اولا وبعد ذلك تستطيع الوصول اليه من خلال IDM
رد: Cisco IPS Recovery image
تقوم بتصطيب البرنامج وبعد ذلك بيظهر البرنامج تجاهل username and password
ضع علامة على run in demo mode
تظهر قائمة configuration
extract it
اختر intrusion prevention
ok
البرنامج عبارة عن محاكي افضل نسخة من سيسكو لم اتمكن من تنزيلها وهي
ASDM v.6.34 & Launcher v1.5(50
رد: Cisco IPS Recovery image
السلام عليكم اخى شريف مجدى
ممكن ترفع اذا تكرم اخر نسخة من asdm demo mode لم استطع الحصول عليها من موقع سيسكو بسبب الحظر المفروض علينا من USA
ASDM v.6.34 & Launcher v1.5(50
رد: Cisco IPS Recovery image
جزاك الله كل خير وجعله في ميزان حسناتك
رد: Cisco IPS Recovery image
السلام عليكم
ممكن بعد أذنكم نسخة ips manager express