Help with Vlan Routing in layer 3 switch
Cisco guys i wanna Help ,, I have Layer 3 Switch in my work & i Created 3 vlans ( vlan per Each Supnet ) ,, How Can I Make Routing with all this vlans with out use other router ,,thats mean the cleints per each supnet will have its own gateway ,, and can communicate with the servers and devices in the other vlans
if any one can help me
he will be very appreciated
Waiting your kind replay
رد: Help with Vlan Routing in layer 3 switch
الموضوع بسيط
لنفرض إنك انشأت ال vlan مثلا 10 و 20 و 30
تقوم بإنشاء 3 انترفيس
كل واحد منهم سيعتبر ال gateway ل subnet معينة
int vlan 10
ip add 192.168.10.1 255.255.255.0
no sh
int vlan 20
ip add 192.168.20.1 255.255.255.0
no sh
int vlan 30
ip add 192.168.30.1 255.255.255.0
no sh
بعض السويتشات يجب تفعيل الراوتنج عليها
ip routing
إذا أردت تفعيل ال dhcp على هذا السوتش فأخبرني
رد: Help with Vlan Routing in layer 3 switch
الف شكر يا بشمهندس ايهاب انا جربتها واشتغلت معايا ,, ربنا يجعلو فى ميزان حسناتك :)
رد: Help with Vlan Routing in layer 3 switch
Create SVI for each VLAN with IP Address and check that at least one port is up and member of the VLAN and check that IP Routing is enabled