نسخه تجريبيه من Afterburner 2.0.0
https://faculty.ksu.edu.sa/75494/Pic...%D9%85_gif.jpg
تم اصدار
afterburner 2.0.0 beta 6 triple over-voltage
بتاريخ 12/8/2010
https://farm5.static.flickr.com/4135...3a76fced_b.jpg
https://t2.gstatic.com/images?q=tbn:...dXJMwaFlj7Xv8=
الجديد
- Voltage control layer has been seriously revamped to give additional freedom to extreme overclockers with new custom design MSI graphics cards. Now MSI Afterburner is able to control up to 3 voltages on custom design MSI Fermi and other future custom design MSI graphics cards. New adjustable voltages include memory voltage and special multi-purpose auxiliary voltage feeding either memory bus (also known as VDDCI on AMD graphics cards) or PCIE bus and crystal (PEXVDD on NVIDIA graphics cards)
- Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N480GTX Lighning series graphics cards with uP6225+uP6262 voltage regulators
- Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N470GTX Twin Frozr II OV3 series graphics cards with uP6218+uP6262 voltage regulators
- Added core, memory and auxiliary PEXVDD voltage control for custom design MSI MSI N460GTX Hawk series graphics cards with uP6262 voltage regulators
- Added core voltage control for custom design MSI N460GTX Cyclone series graphics cards
- Added auxiliary VDDCI voltage control for reference design AMD RADEON HD 5870 series graphics cards
- Added fan tachometer monitoring for NVIDIA graphics cards. Please take a note that not all graphics cards are tachometer reading capable. So depending on graphics card and cooling system fan tachometer monitoring can be unavailable
- Optimized NVIDIA driver-level clock frequency monitoring codepath
- Minimum clock limits for all graphics cards have been reduced from 75% to 50%
- Dynamic overclocking, voltage and fan speed limits. MSI Afterburner no longer uses static slider limits calibration and adjusts the limits dynamically when some external factors affect it (e.g. Overdrive clock limits on AMD cards or VGA BIOS fan speed and voltage limits on NVIDIA GeForce GTX 400 cards)
- New temperature hysteresis settings for software automatic fan control mode gives you additional way to improve cooling system thermal and acoustic parameters
- Now fan speed limits (i.e. minimum and maximum fan speeds accepted by VGA BIOS and display driver) are displayed in custom fan speed curve editor window
- Built-in skin sizes have been reduced due to optimized internal skin panels representation and optimized compiled bitmap cache
- Optional skin compression ability in the built-in skin compiler. Skin format reference documentation has been updated to document new compression options
- Minor built-in skins appearance tweaks
- Now MSI Afterburner uses previously undocumented power user oriented startup mode via the task scheduler under Windows Vista / Windows 7. MSI Afterburner launch no longer requires UAC confirmation at Windows startup. Please take a note that Microsoft Visual C++ 2008 runtime libraries must be installed to get new startup mode working
- Now MSI Afterburner automatically fixes startup link if <Start with Windows> or <Apply overclocking at system startup> is enabled but the registry or task scheduler startup entry is missing
- Startup profile is now displayed in <Apply at Windows startup> option floating tooltip instead of the main window
- Now power users can enable optional DirectInput based hotkeys handler via the configuration file. DirectInput based hotkeys processing can seriously reduce hotkey response time in the applications heavily loading CPU (mostly 3D games) and leaving not enough time for processing standard keyboard input message queues. Please take a note that enabling such sophisticated hotkeys handling mode can cause some system security applications (e.g. pro-active application behavior analysis module of KIS) to warn you about possible keylogging threat
- Improved skin engine, now skinned controls support horizontal and/or vertical centering. Skin format reference guide has been updated to document these new alignment modes
- MSI On-Screen Display server has been upgraded to version 3.7.2. New version gives you the following improvements:
- Now screen capture events are identified visually by text message flashing in On-Screen Display during 0.25s
- Built-in skin sizes have been reduced due to optimized compiled bitmap cache
- Added On-Screen Display profile for Startcraft II : Wings of Liberty
- Added configuration file switch allowing sending MSI Afterburner to system tray instead of closing on <Close> button click
- <Start the task only when computer is running on AC power> option is no longer set in the startup task settings to allow automatically starting application via the task scheduler on laptops or on some UPS models
- Added Korean localization
سلام
:)
رد: نسخه تجريبيه من Afterburner 2.0.0
رد: نسخه تجريبيه من Afterburner 2.0.0
ممتاز يا عزيزى ...جارى التحميل :ah7:
النسخة تحتوى على فولت مود منفصل لكل من الGPU VC ..& MEMORY V
:ah46:....شكل هذة النسخة سوف تكون من اقوى برامج الكسر على العالم :)
رد: نسخه تجريبيه من Afterburner 2.0.0
رائـــــــــع :)
مش ناقص غير اضافة تغيير الـ BIOS عن طريقه ولن تحتاج اي برنامج اخر للتعامل مع كروت الشاشة
رد: نسخه تجريبيه من Afterburner 2.0.0
اقتباس:
المشاركة الأصلية كتبت بواسطة S@M
ممتاز يا عزيزى ...جارى التحميل :ah7:
النسخة تحتوى على فولت مود منفصل لكل من الGPU VC ..& MEMORY V
:ah46:....شكل هذة النسخة سوف تكون من اقوى برامج الكسر على العالم :)
مش عايز ازعلك و اطفي لمبه فرحتك
بس لازم يكون الكارت بيدعم ده
زي كرت 460 msi hawk
رد: نسخه تجريبيه من Afterburner 2.0.0
اقتباس:
المشاركة الأصلية كتبت بواسطة D3VI0US
رائـــــــــع :)
مش ناقص غير اضافة تغيير الـ BIOS عن طريقه ولن تحتاج اي برنامج اخر للتعامل مع كروت الشاشة
مين عارف
ممكن
رد: نسخه تجريبيه من Afterburner 2.0.0
رد: نسخه تجريبيه من Afterburner 2.0.0
اقتباس:
المشاركة الأصلية كتبت بواسطة Maxwell
شكرا عالخبر يا عزيزي
عفوا
اعتقد انه سلسه soc من جيجابيت هيسري عليها الكلام ده لان فيها كنترولر لفولت الرمات و الكلام ده
بس طبعا مش اكيد
ده مجرد تخمين
رد: نسخه تجريبيه من Afterburner 2.0.0
اقتباس:
مش عايز ازعلك و اطفي لمبه فرحتك
بس لازم يكون الكارت بيدعم ده
زي كرت 460 msi hawk
اى كارت يحتوى على شريحة الفولت مود ...سوف تستطيع تفعيل هذة الخواص معة يا عزيزى :)
رد: نسخه تجريبيه من Afterburner 2.0.0
اقتباس:
المشاركة الأصلية كتبت بواسطة S@M
اى كارت يحتوى على شريحة الفولت مود ...سوف تستطيع تفعيل هذة الخواص معة يا عزيزى :)
لا يا سمسم الفولت مود حاجه و الكلام اللي فوق زي اللي في الصوره شيئ اخر
الفولت مود المتعارف عليه انه لل gpu فقط مثل اللي موجود في اغلب الكروت خاصه القياسيه
اما الجديد انك تقدر تتحكم في فولت الرمات و فولت ال phase power ايضا اذا كان الكارت مؤهل لذلك
طبعا ده ينقلك نفله نوعيه تانيه في مجال رفع الترددات للكروت
:)
رد: نسخه تجريبيه من Afterburner 2.0.0
اقتباس:
المشاركة الأصلية كتبت بواسطة eng.ahmedhelal
لا يا سمسم الفولت مود حاجه و الكلام اللي فوق زي اللي في الصوره شيئ اخر
الفولت مود المتعارف عليه انه لل gpu فقط مثل اللي موجود في اغلب الكروت خاصه القياسيه
اما الجديد انك تقدر تتحكم في فولت الرمات و فولت ال phase power ايضا اذا كان الكارت مؤهل لذلك
طبعا ده ينقلك نفله نوعيه تانيه في مجال رفع الترددات للكروت
:)
مثل هذه البرامج تتعامل فقط مع المتحكمات التي لها واجهة تحكم برمجية I2C وعادةً يوجد في بطاقات الفئة الإحترافية متحكم خاص بالنواة ومتحكم آخر للذاكرة ..
مثل دائرة المتحكم CHiL CHL8266 فهي تدعم تغيير الفولت بطريقة I2C
https://tpucdn.com/reviews/Zotac/GeF...vreg_small.jpg
التعديل في Phase power البطاقات على حد علمي إذا كنت تقصد به الـ Mosphets ومراحلها "فهي المتعارف على وصف مجموعاتها بـ Phase power " لا يكون أبداً بطريقة برمجية .. يوجد طرق أخري للتعديل HardMod بإضافة بوتنشميتر للمجموعة يتيح لك التحكم في الفولت.
شكراً على المتابعة.
رد: نسخه تجريبيه من Afterburner 2.0.0
اقتباس:
اما الجديد انك تقدر تتحكم في فولت الرمات و فولت ال phase power ايضا اذا كان الكارت مؤهل لذلك
طبعا ده ينقلك نفله نوعيه تانيه في مجال رفع الترددات للكروت
لاازم تكون دائرة الطاقة PWM ...(( ديجيتال بور فاز )) يا عزيزى لكى يتم هذا ...
ومثل هذة الدوائر غير موجودة الا فى كروت ال 5970 & 5870 &5850 الريفرانس بالنسبة لATI ...
وفى NVIDIA ...GTX480 فقط ..!
اقتباس:
مثل هذه البرامج تتعامل فقط مع المتحكمات التي لها واجهة تحكم برمجية I2C وعادةً يوجد في بطاقات الفئة الإحترافية متحكم خاص بالنواة ومتحكم آخر للذاكرة ..
مثل دائرة المتحكم CHiL CHL8266 فهي تدعم تغيير الفولت بطريقة I2C
ممتاز عزيزى زواوى ...:)...
رد: نسخه تجريبيه من Afterburner 2.0.0
ممكن حد طيب منكم يفهمي اللي مكتوب ده ؟
و ايه وجه الاعتراض منكم علي كلامي ؟
اقتباس:
In Afterburner 2.0, we completely re-design the voltage control module, and implement world's first exclusive "Triple over-Voltage" function. On MSI hi-end graphics card like N460GTX Hawk, N480GTX Lightning, you can pull down the voltage control menu and over-voltage GPU, Memory and Aux.
اقتباس:
N460GTX Hawk will be the first card supports Triple Over-Voltage, and MSI will release more and more cards support Triple or Dual Over-Voltage in the future.
لان اللي انا قولته هو اللي مكتوب لا اكثر ؟
رد: نسخه تجريبيه من Afterburner 2.0.0
اقتباس:
المشاركة الأصلية كتبت بواسطة zwawy
مثل هذه البرامج تتعامل فقط مع المتحكمات التي لها واجهة تحكم برمجية I2C وعادةً يوجد في بطاقات الفئة الإحترافية متحكم خاص بالنواة ومتحكم آخر للذاكرة ..
مثل دائرة المتحكم CHiL CHL8266 فهي تدعم تغيير الفولت بطريقة I2C
التعديل في Phase power البطاقات على حد علمي إذا كنت تقصد به الـ Mosphets ومراحلها "فهي المتعارف على وصف مجموعاتها بـ Phase power " لا يكون أبداً بطريقة برمجية .. يوجد طرق أخري للتعديل HardMod بإضافة بوتنشميتر للمجموعة يتيح لك التحكم في الفولت.
شكراً على المتابعة.
هو ده الجديد اللي وجد في البرنامج و سيطبق علي الكروت الجديده زي 460 hawk
تقريبا كان في حد حاطت موضوع ليه و كان مرفوع لارقام جنونيه
رد: نسخه تجريبيه من Afterburner 2.0.0
بالنسبه ل ati مش كله بردو بيحتوي علي الكلام ده في اصدارات تحتوي عليه اعتقد visiontech و في موجود متحكم للgpu فقط
ده لو ما كنش بايوس ال xfx اللي كان معايا مش مضبوط
ما كنش فيه registers للفولت بتاع الميموري و كان موجود فقط لل gpu و الكلام ايضا كان علي sapphire game edition