ادوات تدريبيه ؟؟؟ يرجى التعليق

مساء الخير . الكيبورد عندي خربان . ولي تعليق اخر ان شاء الله . بس قولوا لي ويش رايكم في الصورة والتفاصيل اسفل

https://www.phroon.com/upload/file13...2494732141.jpg

This Cisco 2503 dual router & 1912 switch kit includes everything you need and supports all the features to pass your CCNA test. The Cisco 2503 is a Cisco 2501 with a built in ISDN BRI port for your later Cisco tests. You must have 16MB of DRAM and 16MB of Flash to run the Enterprise IOS software. Others don't have console kits, transceivers, back to back cables or the latest software. You will also get CCIE tips on CD, CCNA test tips, the IOS on CD, Cisco's TFTP Server and other prep material. These routers are in excellent condition and are guaranteed working. The extra information provided on CD is worth $200 by itself. You will be provided with everything you need to hit the ground running to prepare for your test. No need to spend hours looking for tools, procedures, test review material or fumbling around looking for labs. This is a great educational lab kit. Software licensing is the responsibility of the buyer and is provided on the CD only as a backup of what was loaded on the router when we purchased it. Shipping via UPS Ground in the USA plus any COD fees. International shipping available at an extra cost.
والمواصفات

Tested and Guaranteed working!!
16MB DRAM & 16MB Flash
Cisco Back to Back Cable
Two Serial Ports per router
One Ethernet Port per router
One Console Port per router
One AUX Port per router
Three Power Cables
Console cable
Console cable adapter
Built in ISDN BRI port
Two Transceivers
30 Day Warranty!

Additional Items Include:
Enterprise 12.3.19 IOS on CD
TFTP Server
50 Advanced Cisco Labs covering
RIP, OSPF, IGRP, EIGRP, OSPF, BGP
IP & IPX Routing
Queueing, Multicast, DLSW
Appletalk, IP Firewall, HSRP, NAT
300 Cisco test review questions & tips
List of all Cisco CCNA router commands
IOS Upgrade Instructions
Password Recovery Procedure
CCIE tricks
Cable modem configurations
Connecting thru AUX ports

الأخ الفاضل..
الأدوات الموجودة في الصورة جيدة ولكنها بنظري غير كافية. ذلك أن الكثير من التجارب العملية التي تحتاجها في شهادة سي سي إن أي تتطلب أكثر من راوتر واحد و أكثر من سويتج واحد. فبرمجة الRouting Protocols مثلاً تحتاج منك إلى عدة راوترات (أو إثنين على الأقل) لتستطيع تشغيلها. و كذلك الكثير من تجارب السويتجات مثل VTP و Trunking.

أخوك
محمد

I strongly agree with محمد العاني .
Unfortunately one router and one switch is not enough for CCNA practice.

It is always better to use real network equipments when possible, but buying a complete lab can be expensive.

Lumark_s has written several articles about Dynamips and they all very useful and well explained … you could even use it for CCNP. If you can’t have a complete lab I would suggest using Dynamips.

Dynamips is MORE THAN Enough
Just build your topology
and make your conf.
and analyze the show outputs ..
You'll be professional :)