بسم الله الرحمان الرحيم
l
how to config cisco 1800 port ads
when the router is a ppp client and when the pc is the ppp client
in2 network pppoe and pppoa
وشكرا.
عرض للطباعة
بسم الله الرحمان الرحيم
l
how to config cisco 1800 port ads
when the router is a ppp client and when the pc is the ppp client
in2 network pppoe and pppoa
وشكرا.
PPPOA OU BIEN PPOE DOIT ETRE CONFIGURER A LINTERFACE WAN ATM POUR LE CLIENT EN CONFIGURE PAS PPPOA OU BOEN PPOE .
ECOUTE MON FRERE VOILA UN EXEMPLE DE CONFIGUARTION DE L ADSL SA VOUS AIDE BECEAUP ET TU REVIENDRA INCHA ALLAH ET POUR TON PC TU DOIT LE CONFIGURER TCP/IP SELEMENT SA PASSRELLE PAR DEFAUT C 4EST L ADRESE DE L INTERFACE INSIDE DE ROUTEUR OK C 4EST TRES FACILE SI TA BESOIN D EXPLICATION N HESITER PAS DE ME CONTACTER SUR MON EMAIL
abdou_elmajidi@hotmail.com
Current configuration : 1927 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CISCO2800ADSL
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$f4Lz$lvbFeRJqSHTSDJHO.EsiJ/
enable password cisco
!
no aaa new-model
!
resource policy
!
ip subnet-zero
!
!
--More-- ip cef
!
!
!
!
!
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
no mop enabled
!
interface FastEthernet0/0.1
encapsulation dot1Q 1 native
ip address 192.168.0.250 255.255.255.0
ip nat inside
no snmp trap link-status
!
interface FastEthernet0/0.2
encapsulation dot1Q 2
ip address 192.168.1.250 255.255.255.0
ip nat inside
--More-- no snmp trap link-status
!
interface FastEthernet0/0.10
encapsulation dot1Q 10
ip address 10.10.10.250 255.0.0.0
ip nat inside
no snmp trap link-status
!
interface FastEthernet0/0.20
encapsulation dot1Q 20
ip address 20.20.20.250 255.0.0.0
ip nat inside
no snmp trap link-status
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
--More-- dsl operating-mode auto
pvc 8/35
encapsulation aal5snap
pppoe-client dial-pool-number 1
!
!
interface Serial0/1/0
no ip address
shutdown
no fair-queue
clock rate 2000000
!
interface Serial0/1/1
no ip address
shutdown
clock rate 2000000
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
--More-- ppp authentication chap callin
ppp chap hostname aaaaaaa
ppp chap password 0 aaaaaa
ppp ipcp dns request
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
ip http server
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source list 101 interface Dialer0 overload
!
access-list 101 permit ip any any
dialer-list 1 protocol ip list 101
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
password cisco
login
--More-- !
scheduler allocate 20000 1000
!
end
بارك الله فيك و جزاك الله خيرا