النتائج 1 إلى 3 من 3

الموضوع: أريد أخذ نسخة من running config - Start Config - flash إلى TFTP

  1. #1
    عضو
    تاريخ التسجيل
    Jun 2007
    المشاركات
    979
    الدولة: Egypt
    معدل تقييم المستوى
    17

    أريد أخذ نسخة من running config - Start Config - flash إلى TFTP

    السلام عليكم ورحمة الله وبركاته
    اخوانى الكرام فى المنتدى


    لى سؤال أريد ان أخذ نسخة من ال startup config - running config - flah إلى TFTP Server
    ما هو أفضل برنامج TFTP انا إستخدمت نسخة solar tftp ولكن أدتنى error اللى فى الرسالة الآتية :-

    R1#copy running-config tf
    R1#copy running-config tftp:
    Address or name of remote host []? 192.168.0.2
    Destination filename [r1-confg]?
    .....
    %Error opening tftp://192.168.0.2/r1-confg (Timed out)

  2. #2
    عضو
    تاريخ التسجيل
    Dec 2007
    المشاركات
    26
    معدل تقييم المستوى
    0

    رد: أريد أخذ نسخة من running config - Start Config - flash إلى TFTP

    السلام عليكم
    اخى سؤالي الاول اي برنامج تستعمل لعمل TFTP server جرب هذا link
    https://tftpd32.jounin.net/

    ثانيا هل انت تستعمل Dynamips إذا كان جوابك نعم يجب ان تعمل Loopback interface في windows كي
    تعمل conection وهميت بين Dynamips و windows

  3. #3
    عضو الصورة الرمزية dooby__
    تاريخ التسجيل
    Mar 2005
    المشاركات
    250
    الدولة: Saudi Arabia
    معدل تقييم المستوى
    0

    رد: أريد أخذ نسخة من running config - Start Config - flash إلى TFTP

    تاكد اخي الكريم من الاتصال بين الراوتر و ال Ftp سيرفر(the PC ip address) عن طريق ping من الراوتر
    وبعد ذلك تستطيع النسخ

    و اذا كنت تستخدم Dynamips اليك الخطوات

    Install Microsoft Loopback Adapter
    To install Microsoft Loopback Adapter
    In the host operating system, right-click My Computer, and then select Properties. Depending on the style of the start menu, My Computer may be located in the Start menu.

    In the System Properties dialog box, on the Hardware tab, click Add Hardware Wizard.

    In the Add Hardware dialog box, click Next.

    When the Is the hardware connected? dialog box appears, click Yes, I have already connected the hardware, and then click Next.

    In the Installed hardware list, click Add a new hardware device, and then click Next.

    In the What do you want the wizard to do? list, click Install the hardware that I manually select from a list (Advanced), and then click Next.

    In the Common hardware types list, click Network adapters, and then click Next.

    In the Manufacturer list, click Microsoft.

    In the Network Adapter list, click Microsoft Loopback Adapter, and then click Next twice.

    If a message about driver signing appears, click Continue Anyway.

    In the Completing the Add Hardware Wizard dialog box, click Finish, and then click OK.


    Reference :
    https://technet.microsoft.com/en-us/.../cc708322.aspx

المواضيع المتشابهه

  1. الروتر لا يقبل هذا الكوماند: show running-config vrf
    بواسطة eng_eslam_comm2 في المنتدى الأرشيف
    مشاركات: 1
    آخر مشاركة: 02-09-2012, 20:58
  2. مشكلة في Switch#copy tftp: running-config
    بواسطة aos1982 في المنتدى الأرشيف
    مشاركات: 3
    آخر مشاركة: 07-02-2012, 09:40
  3. Erase nvram config flash
    بواسطة egypt20077 في المنتدى منتدى الشهادات العام
    مشاركات: 0
    آخر مشاركة: 20-03-2011, 14:23
  4. microwave config on asa
    بواسطة الرائد_2009 في المنتدى الأرشيف
    مشاركات: 0
    آخر مشاركة: 08-06-2010, 08:08
  5. config isdn...
    بواسطة hamodah_nisi في المنتدى الأرشيف
    مشاركات: 0
    آخر مشاركة: 23-01-2008, 10:02

الكلمات الدلالية لهذا الموضوع

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •