امتحان ال testinside الخاص بال xp 70-270 فيه اسئلة عجيبة واجابات اعجب نريد من الخبراء التعليق عليها اانا جايبلكم سوالين بالحل بتاعهم نفس السوال ممكن تلاقيه متعاد تانى باجابة تانية ده السوال الاول
29. You are the desktop administrator for your company. All users in the network have Windows XP Professional
computers. Users in the research department have dual-processor computers.
Users in the research department report that when they run 16-bit Windows programs, their computer performance
becomes very slow. You use System Monitor to monitor the users’ computers. You discover that when the users
are running their 16-bit applications, one processor shows a sustained utilization of more than 90 percent while the
other processor only shows utilization of less than 10 percent.
You need to improve application performance for the users in the research department. What should you do?
A. Configure each application to run in a separate memory space.
B. Configure each application to run in AboveNormal priority class.
C. For each application, set the compatibility mode to Windows 95.
D. Configure processor affinity for each application to allow it to run on both processors.
وهما كاتبين اان الاجابة هى A مع ان الواضح انها D لانه ذاكر فى السوال انه موجود اكتر من بروسيسور فى الجهاز
السوال التانى
You are the desktop administrator for your company. You install Windows XP Professional on a new portable
computer that will be used by one of the company's software developers. You test the computer after you complete
the installation and find out that the computer functions properly.
The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as
drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the
computer to the software developer.
TestInside Microsoft 70-270
The software developer reports that the computer does not start when drive D is not connected. Instead, the
computer briefly displays an operating system menu, and then it displays an error message stating that an
operating system could not be found. When drive D is connected, the computer starts Windows 98.
You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected.
What should you do?
A. Modify the computer's BIOS so that it automatically detects whether drive D is connected.
B. Modify the computer's BIOS so that drive C is first in the computer's boot order.
C. Modify the Boot.ini file on the computer by changing the default= entry to the following value:
multi(0)disk(0)rdisk(0)partition(1)="Microsoft Windows XP Professional" /fastdetect
D. Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value:
D: "Microsoft Windows 98" /fastdetect
Answer:
C
هنا بيقولك سطبت ويندوز على الديسك التانى ازاى اعمل بوت من الديسك الاول هوة اصلا عليه نظام تشغيل؟؟
المفضلات