السلام عليكم ورحمة الله وبركاته
قمت اليم بتتبث ماندريفا 2009 وكانت قمة في الروعة حيث تعرفت على اغلب الاجهزة لدية الا جهاز المودم الخاص باشتراك ال ADSL وهو HUAWEI SmartAX MT882 حيث لا يظهر لي في قائمة كروت الشبكة ..

الا انه يظهر في Control Center على انه جهاز غير معروف ..:confused:

.


وبمساعدة من الاخ ĐΓ.ĐΣΓMλNN مشكورا أعطاني رابط لطريق تعريف المودم
Mandriva-Linux-con-el-Huawei-Mt810

ولكن تواجهني مشكلة في تطبيقه حيث امر make لا ينفد لدي
حيث نزلت الملفات
ueagle-atm-1.3.tar.gz
ueagle-data-1.1.tar.gz
br2684ctl-010226-1.i386.rpm
rp-pppoe-3.8.tar.gz
فككت الضغط عنهما ونفدت الامر su

كود:
cd ueagle-atm-1.3
كود:
make
كود:
bash: make: command not found
وجدت موضوع يتحدت عن تعريف نفس المودم هنـا
نفس الشي امر make لا ينفد لدي

وهده نتيجة الامر make و tail -f /var/log/messages

كود:
[root@localhost MyName]# dmesg | grep ueagle
[root@localhost MyName]# cd /media/disk/Linux/Modem/New folder/ueagle-atm-1.3
bash: cd: /media/disk/Linux/Modem/New: No such file or directory
[root@localhost MyName]# cd /media/disk/Linux/Modem/Newfolder/ueagle-atm-1.3
[root@localhost ueagle-atm-1.3]# make
bash: make: command not found
[root@localhost ueagle-atm-1.3]# configure/.
bash: configure/.: No such file or directory
[root@localhost ueagle-atm-1.3]# ./configure
bash: ./configure: No such file or directory
[root@localhost ueagle-atm-1.3]# modprobe ueagle-atm
[root@localhost ueagle-atm-1.3]#

[root@localhost ueagle-atm-1.3]# tail -f /var/log/messages
May 29 21:28:54 localhost kernel: usb 3-3: configuration #1 chosen from 1 choice
May 29 21:28:54 localhost kernel: usb 3-3: New USB device found, idVendor=1110, idProduct=5c01
May 29 21:28:54 localhost kernel: usb 3-3: New USB device strings: Mfr=1, Product=0, SerialNumber=3
May 29 21:28:54 localhost kernel: usb 3-3: Manufacturer: MT882                                     
May 29 21:28:54 localhost kernel: usb 3-3: SerialNumber: usb                                       
May 29 21:30:01 localhost mdkapplet[3927]: Checking Network: seems disabled                        
May 29 21:33:15 localhost kernel: NET: Registered protocol family 8                                
May 29 21:33:15 localhost kernel: NET: Registered protocol family 20                               
May 29 21:33:15 localhost kernel: [ueagle-atm] driver ueagle 1.4 loaded                            
May 29 21:33:15 localhost kernel: usbcore: registered new interface driver ueagle-atm              
tail -f /var/log/messages^Z                                                                        
[1]+  Stopped                 tail -f /var/log/messages                                            
[root@localhost ueagle-atm-1.3]# tail -f /var/log/messages                                         
May 29 21:28:54 localhost kernel: usb 3-3: configuration #1 chosen from 1 choice                   
May 29 21:28:54 localhost kernel: usb 3-3: New USB device found, idVendor=1110, idProduct=5c01     
May 29 21:28:54 localhost kernel: usb 3-3: New USB device strings: Mfr=1, Product=0, SerialNumber=3                
May 29 21:28:54 localhost kernel: usb 3-3: Manufacturer: MT882                                                     
May 29 21:28:54 localhost kernel: usb 3-3: SerialNumber: usb                                                       
May 29 21:30:01 localhost mdkapplet[3927]: Checking Network: seems disabled                                        
May 29 21:33:15 localhost kernel: NET: Registered protocol family 8                                                
May 29 21:33:15 localhost kernel: NET: Registered protocol family 20                                               
May 29 21:33:15 localhost kernel: [ueagle-atm] driver ueagle 1.4 loaded                                            
May 29 21:33:15 localhost kernel: usbcore: registered new interface driver ueagle-atm                              
May 29 21:36:04 localhost drakconf.real[15812]: ### Program is starting ###                                        
May 29 21:36:08 localhost drakconf.real[15819]: ### Program is starting ###                                        
May 29 21:36:16 localhost drakconnect[15825]: ### Program is starting ###                                          
May 29 21:36:22 localhost drakconnect[15825]: default cancel_clicked                                               
May 29 21:36:24 localhost drakconnect[15825]: ### Program is exiting ###                                           
May 29 21:36:27 localhost draknetcenter[16172]: ### Program is starting ###                                        
May 29 21:36:33 localhost draknetcenter[16172]: ### Program is exiting ###                                         
May 29 21:36:42 localhost harddrake2[16179]: ### Program is starting ###                                           
May 29 21:36:43 localhost harddrake2[16179]: running: dmidecode                                                    
May 29 21:36:44 localhost harddrake2[16179]: dmraid::init failed                                                   
May 29 21:36:44 localhost harddrake2[16179]: HDIO_GETGEO on /dev/sda succeeded: heads=255 sectors=63 cylinders=4865 start=0                                                                                                               
May 29 21:36:44 localhost harddrake2[16179]: HDIO_GETGEO on /dev/sdb succeeded: heads=255 sectors=63 cylinders=38913 start=0                                                                                                              
May 29 21:36:44 localhost harddrake2[16179]: HDIO_GETGEO on /dev/sdc succeeded: heads=251 sectors=62 cylinders=1020 start=0                                                                                                               
May 29 21:36:44 localhost harddrake2[16179]: id2hd: 0x878c878c=>sda 0x9d0b0606=>sdb 0x4db39036=>sdc                  
May 29 21:36:44 localhost harddrake2[16179]: id2edd: 0x878c878c=>/sys/firmware/edd/int13_dev80 0x9d0b0606=>/sys/firmware/edd/int13_dev81                                                                                                  
May 29 21:36:44 localhost harddrake2[16179]: geometry_from_edd sdb 0x9d0b0606: 38913/255/63                          
May 29 21:36:44 localhost harddrake2[16179]: geometry_from_edd sda 0x878c878c: 4865/255/63                           
May 29 21:36:44 localhost harddrake2[16179]: test_for_bad_drives(/dev/sda on sector #62)                             
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda                                                
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda                                                
May 29 21:36:44 localhost harddrake2[16179]: found a dos partition table on /dev/sda at sector 0                     
May 29 21:36:44 localhost harddrake2[16179]: guess_geometry_from_partition_table sda: 4865/255/63                    
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda1                                               
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda5                                               
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda6                                               
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda7                                               
May 29 21:36:44 localhost harddrake2[16179]: test_for_bad_drives(/dev/sdb on sector #62)                             
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb                                                
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb                                                
May 29 21:36:44 localhost harddrake2[16179]: found a dos partition table on /dev/sdb at sector 0                     
May 29 21:36:44 localhost harddrake2[16179]: guess_geometry_from_partition_table sdb: 38913/255/63                   
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb1                                               
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb2                                               
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb3                                               
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb5
May 29 21:36:44 localhost harddrake2[16179]: test_for_bad_drives(/dev/sdc on sector #61)
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdc
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdc
May 29 21:36:44 localhost harddrake2[16179]: found a dos partition table on /dev/sdc at sector 0
May 29 21:36:44 localhost harddrake2[16179]: guess_geometry_from_partition_table sdc: 99212/5/32
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 8064): 15,1,11 vs 0,130,4 with geometry 1020/251/62
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 15874047): 268,4,31 vs 1020,13,1 with geometry 1020/251/62
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 8064): 15,1,11 vs 50,2,0 with geometry 99212/5/32
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 15874047): 268,4,31 vs 1023,3,31 with geometry 99212/5/32
May 29 21:36:44 localhost harddrake2[16179]: sdc: argh! no valid geometry found
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdc1
May 29 21:36:44 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name}  lib64alsa-plugins
May 29 21:36:44 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name}  alsa-utils
May 29 21:36:44 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name}  aoss
May 29 21:36:45 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name}  libalsa-plugins
May 29 21:38:07 localhost kernel: usb 3-3: USB disconnect, address 3
May 29 21:38:24 localhost kernel: usb 3-3: new full speed USB device using ohci_hcd and address 4
May 29 21:38:24 localhost kernel: usb 3-3: configuration #1 chosen from 1 choice
May 29 21:38:24 localhost kernel: usb 3-3: New USB device found, idVendor=1110, idProduct=5c01
May 29 21:38:24 localhost kernel: usb 3-3: New USB device strings: Mfr=1, Product=0, SerialNumber=3
May 29 21:38:24 localhost kernel: usb 3-3: Manufacturer: MT882
May 29 21:38:24 localhost kernel: usb 3-3: SerialNumber: usb
ملاحظة وجدت باحدى المنتديات انه لازم تكون الكيرنل موجودة بالمسار /usr/src ولكن المجلد src لايحتوي على اي مجلد او ملف فهل ممكن ان تكون الكيرنل سورس غير موجودة عندي ..
حيث نزلت آخر اصدار للكيرنل والى الآن لا اعرف كيفية تتبثه (لعل يوجد بها حل لتعريف المودم)
هده ملفات الكيرنال الي نزلتهم


patch-2.6.30-rc7
patch-2.6.29.4
مع العلم اصدار الكيرنل لدي 2.6.26 آتية مع نسخة Manriva One 2009