التقرير الثاني
SeaTools Desktop v3.00.07
Copyright (c) 2004 Kroll Ontrack Inc.
12/30/2004 @ 9:33 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 06/28/00
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
40 GB ST340015A
Serial Number = 5LA93MA5
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 4865x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 FAT32 0 2430 19996
EXTENDED
2 FAT32 2431 4864 20021
Diagnostic Results:
Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 30-Dec-2004 21:11:57
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST340015A
Serial Number: 5LA93MA5
Firmware Revision: 3.01
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 78165360 Sectors
Conductor Cable Reported
ID Method: Jumper
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 2904576
Estimated PIO Transfer Rates
Min: 3.17MB/s Max: 3.33MB/s Avg: 3.27MB/s
Estimated DMA Transfer Rates
Min: 26.01MB/s Max: 32.51MB/s Avg: 30.87MB/s
SMART Check: Passed
Short Test Passed: 30-Dec-2004 21:12:41
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
ATA Full Test Result: Passed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 30-Dec-2004 21:12:43
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST340015A
Serial Number: 5LA93MA5
Firmware Revision: 3.01
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 78165360 Sectors
Conductor Cable Reported
ID Method: Jumper
SMART Check: Passed
Full Scan (0 to 78165360) - Passed
Elapsed Time: 19.37 Minutes
Estimated Internal Transfer Rates
Min: 9.00Mb/s Max: 1423.85Mb/s Avg: 288.76Mb/s
PIO/DMA Data Compare
Total Bytes = 25190400
Estimated PIO Transfer Rates
Min: 3.22MB/s Max: 3.40MB/s Avg: 3.30MB/s
Estimated DMA Transfer Rates
Min: 25.13MB/s Max: 62.82MB/s Avg: 31.70MB/s
Long Test Passed: 30-Dec-2004 21:32:15
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (FAT 32 (19.9 GB) NO NAME ) Result: Critical Error(s)
3 Critical Structure Error(s)
2 Non-Critical Structure Error(s)
1605969 KBytes in 13889 files
554 directories were found
86875 KBytes in 824 deleted files
19 deleted directories were found
ERROR SUMMARY:
Invalid File Size 1
Invalid Chain Termination 2
Invalid Media Descriptor 1
Invalid Free Space Value 1
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (FAT 32 (20 GB) NO NAME ) Result: Critical Error(s)
43 Critical Structure Error(s)
2 Non-Critical Structure Error(s)
327749 KBytes in 35816 files
1226 directories were found
2157850 KBytes in 2314 deleted files
106 deleted directories were found
ERROR SUMMARY:
Invalid Entry Name 43
Invalid Media Descriptor 1
Invalid Free Space Value 1
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
================================================== ======
المفضلات