النتائج 1 إلى 2 من 2

الموضوع: مشكلة في تشغيل راوتر سيسكور 871w

  1. #1
    عضو
    تاريخ التسجيل
    Apr 2007
    المشاركات
    5
    معدل تقييم المستوى
    0

    مشكلة في تشغيل راوتر سيسكور 871w



    السلام عليكم ورحمة الله وبركاته
    استلمت راوتر 871w سيسكور مؤخرا لكن عند تشغيلي له يشتغل في البداية ويتوقف عند مرحله معينة في كل مره لا يتجاوزها ولا استطيع عمل اشي او كتابة اي امر وهذي نسخة من hyper terminal والاتصال عن طريق consol cable

    كود:
    System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 2005 by cisco Systems, Inc.
    
    C870 series (Board ID: 3-148) platform with 131072 Kbytes of main memory
    
    Booting flash:/c870-advsecurityk9-mz.123-8.YI2.bin
    Self decompressing the image : #################################################
    ############## [OK]
    
                  Restricted Rights Legend
    
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
    
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    
    
    
    Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE
    LEASE SOFTWARE (fc1)
    Synched to technology version 12.3(10.3)T2
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Tue 14-Jun-05 18:58 by ealyon
    Image text-base: 0x8002008C, data-base: 0x811A4EAC
    
    
     Changing crypto engine : Onboard: 0 state change to:  INIT
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    
    If you require further assistance please contact us by sending email to
    export@cisco.com.
    
    Cisco 871W (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of mem
    ory.
    Processor board ID FHK101554PC
    MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
    5 FastEthernet interfaces
    1 802.11 Radio
    128K bytes of non-volatile configuration memory.
    24576K bytes of processor board System flash (Intel Strataflash)
    
    username cisco privilege 15 one-time secret 0 cisco
                                ^
    % Invalid input detected at '^' marker.
    
    line vty 5 15
             ^
    % Invalid input detected at '^' marker.
    
     access-class 23 in
            ^
    % Invalid input detected at '^' marker.
    
     privilege level 15
                ^
    % Invalid input detected at '^' marker.
    
     login local
           ^
    % Invalid input detected at '^' marker.
    
     transport input telnet
        ^
    % Invalid input detected at '^' marker.
    
     transport input telnet ssh
        ^
    % Invalid input detected at '^' marker.
    
    SETUP: new interface Dot11Radio0 placed in "shutdown" state
    SETUP: new interface FastEthernet4 placed in "shutdown" state
    
    
    Press RETURN to get started!
    
    
    *Mar  1 00:00:07.767:  Changing crypto engine : Onboard: 0 state change to:  ENA
    BLED
    *Mar  1 00:00:09.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et4, changed state to down
    *Mar  1 00:00:09.427: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
    up
    *Mar  1 00:00:10.427: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et0, changed state to up
    *Mar  1 00:00:11.939: USB init complete.
    *Mar  1 00:00:13.319: %SYS-6-LOGGERSTART: Logger process started
    *Mar  1 00:00:14.299: %SYS-5-CONFIG_I: Configured from memory by console
    *Jun 13 07:46:23.047: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a
    dministratively down
    *Jun 13 07:46:23.319: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE
    LEASE SOFTWARE (fc1)
    Synched to technology version 12.3(10.3)T2
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Tue 14-Jun-05 18:58 by ealyon
    *Jun 13 07:46:23.319: %SNMP-5-COLDSTART: SNMP agent on host yourname is undergoi
    ng a cold start
    *Jun 13 07:46:23.355: %SSH-5-ENABLED: SSH 1.99 has been enabled
    *Jun 13 07:46:24.047: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
    0, changed state to down
    *Jun 13 07:46:24.887: %LINK-5-CHANGED: Interface FastEthernet4, changed state to
     administratively down
    *Jun 13 07:46:24.979: %LINK-3-UPDOWN: Interface FastEthernet3, changed state to
    up
    *Jun 13 07:46:24.983: %LINK-3-UPDOWN: Interface FastEthernet2, changed state to
    up
    *Jun 13 07:46:24.991: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to
    up
    *Jun 13 07:46:24.995: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
    up
    *Jun 13 07:46:25.087: %LINK-5-CHANGED: Interface Virtual-Dot11Radio0, changed st
    ate to administratively down
    *Jun 13 07:46:25.979: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et3, changed state to down
    *Jun 13 07:46:25.983: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et2, changed state to down
    *Jun 13 07:46:25.991: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et1, changed state to down
    *Jun 13 07:46:25.995: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et0, changed state to down
    *Jun 13 07:46:26.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Do
    t11Radio0, changed state to down
    
    System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 2005 by cisco Systems, Inc.
    
    C870 series (Board ID: 3-148) platform with 131072 Kbytes of main memory
    
    Booting flash:/c870-advsecurityk9-mz.123-8.YI2.bin
    Self decompressing the image : #################################################
    ############## [OK]
    
                  Restricted Rights Legend
    
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
    
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    
    
    
    Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE
    LEASE SOFTWARE (fc1)
    Synched to technology version 12.3(10.3)T2
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Tue 14-Jun-05 18:58 by ealyon
    Image text-base: 0x8002008C, data-base: 0x811A4EAC
    
    
     Changing crypto engine : Onboard: 0 state change to:  INIT
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    
    If you require further assistance please contact us by sending email to
    export@cisco.com.
    
    Cisco 871W (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of mem
    ory.
    Processor board ID FHK101554PC
    MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
    5 FastEthernet interfaces
    1 802.11 Radio
    128K bytes of non-volatile configuration memory.
    24576K bytes of processor board System flash (Intel Strataflash)
    
    username cisco privilege 15 one-time secret 0 cisco
                                ^
    % Invalid input detected at '^' marker.
    
    line vty 5 15
             ^
    % Invalid input detected at '^' marker.
    
     access-class 23 in
            ^
    % Invalid input detected at '^' marker.
    
     privilege level 15
                ^
    % Invalid input detected at '^' marker.
    
     login local
           ^
    % Invalid input detected at '^' marker.
    
     transport input telnet
        ^
    % Invalid input detected at '^' marker.
    
     transport input telnet ssh
        ^
    % Invalid input detected at '^' marker.
    
    SETUP: new interface Dot11Radio0 placed in "shutdown" state
    SETUP: new interface FastEthernet4 placed in "shutdown" state
    
    
    Press RETURN to get started!
    
    
    *Mar  1 00:00:07.763:  Changing crypto engine : Onboard: 0 state change to:  ENA
    BLED
    *Mar  1 00:00:09.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et4, changed state to down
    *Mar  1 00:00:09.423: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
    up
    *Mar  1 00:00:10.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et0, changed state to up
    *Mar  1 00:00:11.939: USB init complete.
    *Mar  1 00:00:13.319: %SYS-6-LOGGERSTART: Logger process started
    *Mar  1 00:00:14.299: %SYS-5-CONFIG_I: Configured from memory by console
    *Jun 13 07:46:23.047: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a
    dministratively down
    *Jun 13 07:46:23.319: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE
    LEASE SOFTWARE (fc1)
    Synched to technology version 12.3(10.3)T2
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Tue 14-Jun-05 18:58 by ealyon
    *Jun 13 07:46:23.319: %SNMP-5-COLDSTART: SNMP agent on host yourname is undergoi
    ng a cold start
    *Jun 13 07:46:23.355: %SSH-5-ENABLED: SSH 1.99 has been enabled
    *Jun 13 07:46:24.047: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
    0, changed state to down
    *Jun 13 07:46:24.887: %LINK-5-CHANGED: Interface FastEthernet4, changed state to
     administratively down
    *Jun 13 07:46:24.983: %LINK-3-UPDOWN: Interface FastEthernet3, changed state to
    up
    *Jun 13 07:46:24.987: %LINK-3-UPDOWN: Interface FastEthernet2, changed state to
    up
    *Jun 13 07:46:24.991: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to
    up
    *Jun 13 07:46:24.995: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
    up
    *Jun 13 07:46:25.091: %LINK-5-CHANGED: Interface Virtual-Dot11Radio0, changed st
    ate to administratively down
    *Jun 13 07:46:25.983: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et3, changed state to down
    *Jun 13 07:46:25.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et2, changed state to down
    *Jun 13 07:46:25.991: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et1, changed state to down
    *Jun 13 07:46:25.995: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et0, changed state to down
    *Jun 13 07:46:26.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Do
    t11Radio0, changed state to down
    
    System Bootstrap, Version 12.3(8r)YI2, RELEASE SOFTWARE
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 2005 by cisco Systems, Inc.
    
    C870 series (Board ID: 3-148) platform with 131072 Kbytes of main memory
    
    Booting flash:/c870-advsecurityk9-mz.123-8.YI2.bin
    Self decompressing the image : #################################################
    ############## [OK]
    
                  Restricted Rights Legend
    
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
    
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    
    
    
    Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE
    LEASE SOFTWARE (fc1)
    Synched to technology version 12.3(10.3)T2
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Tue 14-Jun-05 18:58 by ealyon
    Image text-base: 0x8002008C, data-base: 0x811A4EAC
    
    
     Changing crypto engine : Onboard: 0 state change to:  INIT
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    
    If you require further assistance please contact us by sending email to
    export@cisco.com.
    
    Cisco 871W (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of mem
    ory.
    Processor board ID FHK101554PC
    MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
    5 FastEthernet interfaces
    1 802.11 Radio
    128K bytes of non-volatile configuration memory.
    24576K bytes of processor board System flash (Intel Strataflash)
    
    username cisco privilege 15 one-time secret 0 cisco
                                ^
    % Invalid input detected at '^' marker.
    
    line vty 5 15
             ^
    % Invalid input detected at '^' marker.
    
     access-class 23 in
            ^
    % Invalid input detected at '^' marker.
    
     privilege level 15
                ^
    % Invalid input detected at '^' marker.
    
     login local
           ^
    % Invalid input detected at '^' marker.
    
     transport input telnet
        ^
    % Invalid input detected at '^' marker.
    
     transport input telnet ssh
        ^
    % Invalid input detected at '^' marker.
    
    SETUP: new interface Dot11Radio0 placed in "shutdown" state
    SETUP: new interface FastEthernet4 placed in "shutdown" state
    
    
    Press RETURN to get started!
    
    
    *Mar  1 00:00:07.759:  Changing crypto engine : Onboard: 0 state change to:  ENA
    BLED
    *Mar  1 00:00:09.419: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et4, changed state to down
    *Mar  1 00:00:09.419: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
    up
    *Mar  1 00:00:10.419: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et0, changed state to up
    *Mar  1 00:00:11.935: USB init complete.
    *Mar  1 00:00:13.311: %SYS-6-LOGGERSTART: Logger process started
    *Mar  1 00:00:14.291: %SYS-5-CONFIG_I: Configured from memory by console
    *Jun 13 07:46:23.047: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a
    dministratively down
    *Jun 13 07:46:23.319: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI2, RE
    LEASE SOFTWARE (fc1)
    Synched to technology version 12.3(10.3)T2
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Tue 14-Jun-05 18:58 by ealyon
    *Jun 13 07:46:23.319: %SNMP-5-COLDSTART: SNMP agent on host yourname is undergoi
    ng a cold start
    ng a cold start
    *Jun 13 07:46:24.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
    0, changed state to down
    *Jun 13 07:46:24.887: %LINK-5-CHANGED: Interface FastEthernet4, changed state to
     administratively down
    *Jun 13 07:46:24.979: %LINK-3-UPDOWN: Interface FastEthernet3, changed state to
    up
    *Jun 13 07:46:24.983: %LINK-3-UPDOWN: Interface FastEthernet2, changed state to
    up
    *Jun 13 07:46:24.991: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to
    up
    *Jun 13 07:46:24.995: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
    up
    *Jun 13 07:46:25.087: %LINK-5-CHANGED: Interface Virtual-Dot11Radio0, changed st
    ate to administratively down
    *Jun 13 07:46:25.979: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et3, changed state to down
    *Jun 13 07:46:25.983: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et2, changed state to down
    *Jun 13 07:46:25.991: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et1, changed state to down
    *Jun 13 07:46:25.995: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et0, changed state to down
    *Jun 13 07:46:26.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Do
    t11Radio0, changed state to down
    <<<يتوقف هنا وبعدها خلاص مافيه اي استجابه !!

    هل فيه طريقة ممكن نتجاوز هذي المرحله او اصلاحها ؟

    الحمدالله اللمشكلة اللي فوق انحلت عن طريق الدخول الى وضع ROMMON MODE لكن جت مشكلة ثانية اللي اهي
    I just powered on a cisco 871W router. Everything else seems ok. However, the system is freezing when the System Configuration Dialog.

    It is not allowing me to select yes /no for configuration.

    Plse help.

    Thanks

  2. #2
    عضوية جديدة
    تاريخ التسجيل
    Sep 2009
    المشاركات
    3
    معدل تقييم المستوى
    0

    رد: مشكلة في تشغيل راوتر سيسكور 871w



    السلام عليكم ورحمة الله وبركاته

    اخى الكريم من وجهة نظرى المحدود ان هذا الراوتر عليه نسخة تالفة من ال IOS و يتضح هذا من اعاد الجهاز تشغيل نفسه مرارا و تكرارا كما اوضحتم فى المشكلة التى قلتم انها قد تم حلها و يظهر هذا ايضا فى تجمد الجهاز عند كتابة الاوامر عليه و لذلك من الافضل الكشف على نسخة السيستيم (IOS) الموجودة على الرواتر و تنزيل نسخة جديدة و ستكون الحل الامثل و المفيد باذن الله

المواضيع المتشابهه

  1. مساعده في تشغيل راوتر وايرلس Linksys
    بواسطة hazemsakr في المنتدى الأرشيف
    مشاركات: 1
    آخر مشاركة: 01-06-2013, 00:22
  2. استفسار عن كيفية تشغيل راوتر ببطاريات
    بواسطة Drea في المنتدى عروض بيع الأجهزة ومتعلقاتها المُقدمّه من الأعضاء
    مشاركات: 1
    آخر مشاركة: 21-03-2013, 00:12
  3. هل استطيع تشغيل راوتر سيسكو على لاب توب
    بواسطة مصعب1979 في المنتدى الأرشيف
    مشاركات: 6
    آخر مشاركة: 12-07-2011, 11:09
  4. مشكله فى تشغيل راوتر 7200 فى GNS3
    بواسطة ahmedit في المنتدى الأرشيف
    مشاركات: 2
    آخر مشاركة: 04-01-2011, 21:48
  5. كيفية تشغيل ال vpn على راوتر linksys
    بواسطة ellassy في المنتدى منتدى الشهادات العام
    مشاركات: 1
    آخر مشاركة: 23-06-2010, 12:55

الكلمات الدلالية لهذا الموضوع

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •