طبعا ...
انا بشتغل علي ويندوز 7 مع ال dynagen ...
ممكن تشرح المشكله واذا امكن الامر تعطيني شو ال errors الي بتشوفها؟
السلام م عليكم
هل ال dynamips يعمل مع ويندوز 7 انا حاولت ولكن لا استطيع انشاء مفكره داخل daynagin
هل احد من الاخوان جرب ذلكز افيدوني وجزاكم الله خيرا
طبعا ...
انا بشتغل علي ويندوز 7 مع ال dynagen ...
ممكن تشرح المشكله واذا امكن الامر تعطيني شو ال errors الي بتشوفها؟
السلام عليكم
هذا error
Reading configuration file...
*** Warning: received dynamips error:
206-unable to create VM instance 'R1'
*** Warning: received dynamips error:
206-unable to create VM instance 'R2'
*** Error: errors during loading of the topology file, please correct them
Press ENTER to continue
وهذا الملف حق ال topology
#This my first lab
autostart = false
[TAREQ-PC]
[[3640]]
image = C:\Program Files (x86)\Dynamips\images\c3640-is-mz.124-16.bin
#idlepc = 0x60719b98
nvram = 128
disk0 = 12
disk1 = 12
confreg = 0x2102
ram = 128
mmap = true
[[router R1]]
model = 3640
console = 2000
slot0 = NM-4E
slot1 = NM-4T
s1/0 = R2 s1/0
[[router R2]]
model = 3640
console = 2001
slot0 = NM-4E
slot1 = NM-4T
update me ..كود:permission errors my friend Do the following steos:1. right click onto the dynamips folder. 2. security tab 3. system group. 4. edit option. 5. be sure that the "system" group have a full rights ( read , write etc...)....
thank you very much my friend for your care
i followed your steps and find all options are right expect special permission and i do not know how i do it right but dynagen still does not work and error remain
What i can do my friend
Best regards
جرب هذا الملف من فضلك:
كود:autostart = false [Put your computer name here] [[3640]] image = C:\Program Files\Dynamips\images\c3640-js-mz.122-17.bin *** change the path or the file name **** ram = 96 nvram = 128 disk0 = 64 disk1 = 64 confreg = 0x2102 ########### [[ROUTER R1]] model = 3640 console = 2001 slot0 = NM-4E slot1 = NM-4T ############################################### [[ROUTER R2]] model = 3640 console = 2002 slot0 = NM-4E slot1 = NM-4T
I tried the file that gave me but the same error is exsiting
Your file work with you without error
i don't have any error
every configuration file works fine
i am telling you ... this is a permission error for windows 7 .. i had the same error till i gave the system full permission
I do as you told me but there is special permission i do not know how make it right
can you tell me how can i make it right
Does these objects have a full permissions on Dynamips folder
System , Administrators and users
Full permission is
Full control, modify, read & execute, list folder, read, write and special permission.
مشكووووووووووووووور اخي وجزاك الله خيرا وجعله في ميزان حسناتك
اشتغل معاي الان ال dynamps
انا سعيدجدا وانشاء الله تستفيد بتعليمك ودايما احنا موجودين للمساعده ...
بدون تعليمي من عرب هاردوير كان ما عرفت اجاوبك ....
هل قمت بربط ال VMware مع ال dynamips
انا اريد ربط ال VMware مع dynamips ولكن هنالك مشكله وهي عندما اضغط على ال network device list لاتظهر اي VMware adaptor
PCAP: unable to find device list (No interfaces found! Make sure libpcap/WinPcap
is properly installed on the local machine.)
طبعا اخي ...
بيشتغل 100% ...
لازم تعمل bridge بين ال PC وال dynamips. وهذي الخطوه بتعملها عن طريق ال vmware.
انا بقترح انك تشاهد حلقات الاستاذ لومارك
السلام عليكم
لايمكنني عمل telnet للراوترات . عندما اعمل telnet R1 تاتيني رساله
The system cannot find the file telnet.
ارجو افادتي وجزاك الله خير
المفضلات