ممكن مساعدة من خبراء dynamis

[abdullah2006]

السلام م عليكم

هل ال dynamips يعمل مع ويندوز 7 انا حاولت ولكن لا استطيع انشاء مفكره داخل daynagin
هل احد من الاخوان جرب ذلكز افيدوني وجزاكم الله خيرا

[Creed]

طبعا ...
انا بشتغل علي ويندوز 7 مع ال dynagen ...
ممكن تشرح المشكله واذا امكن الامر تعطيني شو ال errors الي بتشوفها؟

[abdullah2006]

السلام عليكم
هذا error

Reading configuration file...
*** Warning: received dynamips error:
206-unable to create VM instance 'R1'
*** Warning: received dynamips error:
206-unable to create VM instance 'R2'
*** Error: errors during loading of the topology file, please correct them
Press ENTER to continue

وهذا الملف حق ال topology


#This my first lab
autostart = false
[TAREQ-PC]
[[3640]]
image = C:\Program Files (x86)\Dynamips\images\c3640-is-mz.124-16.bin
#idlepc = 0x60719b98
nvram = 128
disk0 = 12
disk1 = 12
confreg = 0x2102
ram = 128
mmap = true
[[router R1]]
model = 3640
console = 2000
slot0 = NM-4E
slot1 = NM-4T
s1/0 = R2 s1/0
[[router R2]]
model = 3640
console = 2001
slot0 = NM-4E
slot1 = NM-4T

[Creed]

permission errors my friend
Do the following steos:
 
1. right click onto the dynamips folder.
2. security tab
3. system group.
4. edit option.
5. be sure that the "system" group have a full rights ( read , write etc...)....

update me ..

[abdullah2006]

thank you very much my friend for your care
i followed your steps and find all options are right expect special permission and i do not know how i do it right but dynagen still does not work and error remain

What i can do my friend







Best regards

[Creed]

جرب هذا الملف من فضلك:

autostart = false
[Put your computer name here] 
[[3640]]
image = C:\Program Files\Dynamips\images\c3640-js-mz.122-17.bin *** change the path or the file name ****
ram = 96
nvram = 128
disk0 = 64
disk1 = 64
confreg = 0x2102

###########
[[ROUTER R1]]
model = 3640
console = 2001
slot0 = NM-4E
slot1 = NM-4T

###############################################
[[ROUTER R2]]
model = 3640
console = 2002
slot0 = NM-4E
slot1 = NM-4T

[abdullah2006]

I tried the file that gave me but the same error is exsiting

Your file work with you without error

[Creed]

i don't have any error
every configuration file works fine

i am telling you ... this is a permission error for windows 7 .. i had the same error till i gave the system full permission

[abdullah2006]

I do as you told me but there is special permission i do not know how make it right
can you tell me how can i make it right

[abdullah2006]

مشكووووووووووووووور اخي وجزاك الله خيرا وجعله في ميزان حسناتك
اشتغل معاي الان ال dynamps

[Creed]

Does these objects have a full permissions on Dynamips folder
System , Administrators and users

Full permission is
Full control, modify, read & execute, list folder, read, write and special permission.

[Creed]

انا سعيدجدا وانشاء الله تستفيد بتعليمك ودايما احنا موجودين للمساعده ...
بدون تعليمي من عرب هاردوير كان ما عرفت اجاوبك ....

[abdullah2006]

هل قمت بربط ال VMware مع ال dynamips
انا اريد ربط ال VMware مع dynamips ولكن هنالك مشكله وهي عندما اضغط على ال network device list لاتظهر اي VMware adaptor
PCAP: unable to find device list (No interfaces found! Make sure libpcap/WinPcap
is properly installed on the local machine.)

[Creed]

طبعا اخي ...
بيشتغل 100% ...
لازم تعمل bridge بين ال PC وال dynamips. وهذي الخطوه بتعملها عن طريق ال vmware.
انا بقترح انك تشاهد حلقات الاستاذ لومارك

[abdullah2006]

السلام عليكم
لايمكنني عمل telnet للراوترات . عندما اعمل telnet R1 تاتيني رساله

The system cannot find the file telnet.
ارجو افادتي وجزاك الله خير