Remote Access + Radius =VPN

[sayed_nada2002]

بسم الله الرحمن الرحيم
1- عملت سرفر راس وشتغل تمام وكان التوثيق على الوندوز
2 - نقلت التوثيق للراديس اشتغل مره وبعده مش عايز يشتغل


محدش يقولى ادى اليوز برمش لان انا اديت فعلا برمش وهو كان شغال وعملت كله الى انا عايز

كل حاجه تمام من الابره للصاروخ
للعلم انا رجعت تانى للتوثيق من الوندوز وعمل يوزر محلى اشتغل عادى
رجعت تانى للرديس مشتغلش
اريد حالا
:ah34:

Error 691

[sayed_nada2002]

مفيش اى حد عارف ولا ايه

[عادل شبل]

يعنى اشتغل مع RADIUS مره واحده وماشتغلش تانى ولا ايه؟

[sayed_nada2002]

يعنى اشتغل مع RADIUS مره واحده وماشتغلش تانى ولا ايه؟

ايوه اشتغل Radius مره واحد بس وحلف بعدها

لما عملت للسرفر الى عليه Ras عضو فى الدومين دخل من غير اى مشاكل


طيب المشكله هنا ان انا ممكن اعمله عضو فى الدومين ومفيش اى مشاكل ,, لكن RAS عليه ريل ايبى بيعنى من الافضل انه ميكنش عضو فى الدومين

وهو ليه مش راضى يشتغل على Radius على فكره بيطلع رساله Error 691


هنا برده بعد البحث المشكله متحلتش

This behavior can occur if any of the following conditions are true: The Include Windows logon domain check box is selected in the Options tab of the dial-up connection's Properties dialog box. -or-

An incorrect user name or password is used. -or-

The dial-up connection's security option is incorrectly configured to use the Require secured password setting.

Back to the top

RESOLUTION
To resolve this behavior, follow these steps: Click Start, point to Connect To,...

To resolve this behavior, follow these steps: Click Start, point to Connect To, and then click your dial-up connection.
Click Properties, and then click the Options tab.
Click to clear the Include Windows logon domain check box (if it is selected), and then click OK.
Click Dial.
If this procedure resolves the issue, and you can establish a dial-up connection; you do not need to follow the remaining steps in this article.
If this does not resolve the issue, and you cannot establish a dial-up connection, go to step 5 to further troubleshoot this issue.
In the Connect dialog box, verify that your user name and password are correctly typed in the User name and Password boxes, and then click Dial.
If this procedure resolves the issue, and you can establish a dial-up connection; you do not need to follow the remaining steps in this article.
If this does not resolve the issue, and you cannot establish a dial-up connection, go to step 6 to further troubleshoot this issue.
Click Start, point to Connect To, and then click your dial-up connection.
In the Connect dialog box, click Properties.
Click the Security tab.
Under Security options, click Allow unsecured password in the Validate my identity as follows box, and then click OK.
Back to the top:ah34:

[gamal_mcse]

خد اللينك دا هيفيدك


https://www.mediafire.com/myfiles.php?r=knpsd