cisco ip phone 7940 auto complete

[bareeq300999]

السلام عليكم
عندى تليفونات سيسكو 7940
وشغاله كويس الحمد لله
بس ال Auto completion During Dial
مش شغال
يعنى الارقام اللى انا طلبتها قبل كده مش بتظهر وانا بطلبها تانى
انا عاوزه command line من فضلكم يشغلهالى
ممكن تساعدونى؟

[almohajer915]

السلام عليكم

جربي هذه الطريقة إن شاء الله تزبط

----------------------------------------------------
Configuring Auto Complete Number
----------------------------------------------------

You can configure your phone to automatically complete the phone number being dialed by using the
Auto Complete Number feature.

Perform the following steps to configure the Auto Complete Number feature.


Step 1
Press the settings button.

Step 2
Press the Scroll key to highlight Call Preferences.

Step 3
Press the Select softkey.

Step 4
Press the Scroll key to highlight Auto Complete Number from the Call Preferences menu.

Step 5
To enable the Auto Complete Number feature, press the Yes softkey. To disable the feature, press the No

softkey.
Step 6
Press the Save softkey to save your selection of this feature and display the Settings menu.

Step 7 Press the Back softkey to display the main LCD screen.

[IT-Eng]

7940SCCP phones do not support this feature
if u want to enable it, u should configure them as SIP phones

[bareeq300999]

السلام عليكم

جربي هذه الطريقة إن شاء الله تزبط

----------------------------------------------------
Configuring Auto Complete Number
----------------------------------------------------

You can configure your phone to automatically complete the phone number being dialed by using the
Auto Complete Number feature.

Perform the following steps to configure the Auto Complete Number feature.


Step 1
Press the settings button.

Step 2
Press the Scroll key to highlight Call Preferences.

Step 3
Press the Select softkey.

Step 4
Press the Scroll key to highlight Auto Complete Number from the Call Preferences menu.

Step 5
To enable the Auto Complete Number feature, press the Yes softkey. To disable the feature, press the No

softkey.
Step 6
Press the Save softkey to save your selection of this feature and display the Settings menu.

Step 7 Press the Back softkey to display the main LCD screen.

جزاك الله خيرا لكن المشكله اننى لا اجد
Call Preferences
ولذلك قد طلبت command line
هل يوجد حل؟

[bareeq300999]

7940SCCP phones do not support this feature
if u want to enable it, u should configure them as SIP phones

Thank you so much
but can you tell me how?

[ah_khairy]

Thank you so much
but can you tell me how?

Install 7960 SIP firmware for CUCM 6 or CUCM 7

[bareeq300999]

Install 7960 SIP firmware for CUCM 6 or CUCM 7

Thank you for your reply
but does it work with 7940?
Thanks a lot in advance