need help "PPPOE configuration"

[moha83]

Dears ,

Could any body help me with the configuration of the PPPOE on 7200 cosco router ,and how can i do the radius test on the same router without the need for external server .

Regards

[SyrianCyclone]

PPPoE Configuration :

Router(config)#interface f0/0
Router(config-if)#pppoe enable
Router(config-if)#pppoe-client dial-pool-number 1
Router(config-if)#no shutdown
Router(config-if)#exit

configure the dialer interface of the router for PPPoE with (MTU) size of 1492 bytes and a negotiated IP address (dynamically from DHCP server )

Router(config)#interface dialer 1 (define a dialer )
Router(config-if)#ip address negotiated
Router(config-if)#ip mtu 1492
Router(config-if)#encapsulation ppp
Router(config-if)#dialer pool 1

Router(config-if)#exit

[moha83]

thank u very much sir