النتائج 1 إلى 5 من 5

الموضوع: CCAN سؤال وجواب وشرح - طريقة جديدة للتعليم والمراجعة بالنسبة للمبتدئين والمحترفين

  1. #1
    عضو الصورة الرمزية ahmed Eltayeb
    تاريخ التسجيل
    Sep 2005
    المشاركات
    14
    معدل تقييم المستوى
    0

    Post CCAN سؤال وجواب وشرح - طريقة جديدة للتعليم والمراجعة بالنسبة للمبتدئين والمحترفين

    يشرفنى عرض هذا الموضوع على كل زملائي فى هذا المنتدي الموقر والذي أحترم كل ما فيه من اعضاء و أتمنى كامل الصحة والتوفيق للقائمين على هذا الموقع الناجح

    الهدف من المشاركة هى تقديم طريقة جديدة فى تعليم الـCCNA وهى فى صيغة سؤال وجواب وسوف أقوم بشرح جميع الأسئلة بفضل الله وكرمه وهى عبارة عن أكمال مسيرة الزملاء فى مسيرة تعليم هذه الشهادة التى تعتبر فى نظرى أساسية لكل شخص يريد ان يلتحق بمجال الشبكات .
    سوف نقوم بتقسيم هذا الموضوع إلى 5 أجزاء
    [
    LEFT]

    .:1:.
    Network Fundamentals -CCNA 1
    •Protocol models and industry standards
    •Networking components
    •Building simple Ethernet networks
    •Design calculate and apply subnets

    .:2:.
    Routing Protocols and Concepts CCNA 2
    •Cisco Router configuration
    •Routed and routing protocols
    •Basic Router troubleshooting
    •Design routed networks
    .:3:.
    LAN Switching and Wireless CCNA 3
    •Manage Cisco IOS software
    •LAN switching theory and VLANs
    •Perform basic wireless configuration
    •Identify and resolve common switching issues
    .:4:.
    Accessing The WAN CCNA 4
    •WAN theory, design and troubleshooting
    •PPP and Frame Relay
    •Router security and access control lists
    •NAT, PAT, DNS and DHCP operations
    5- وأخيرا أمتحان الفينل -CCNA Final Exam
    CCNA 640 802 [/LEFT]

    وبالنسبة للCCNA المتخصصة مثل الفويس او السيكيوريتي تعتبر أجزاء من التوتال - ولاكنك تدرس جميع الفروع بالكامل - وهى أعم واهم في مجال العمل
    سوف نبداء بدراسة الجزء الأول ويمكن المناقشة فى بعض الأسئلة أن أرادت مزيد من الإيضاح
    ألشرح سوف يكون بالغة الأنجليزية البسيطة و العربية فى حالة الضرورة لمذيد من الإيضاح

    CCNA 1 CCNA1 - Networking Fundamentals

    Semester 1: CCNA Exploration Network Fundamentals course

    CCNA Exploration 1 – Module 1 Exam Answers
    Question No. 01


    The console port can be used for which of the following? (Choose three.)


    1.debugging.
    2.password recovery.
    3.routing data between networks.
    4.troubleshooting.
    5.connecting one router to another.

    Correct answer: 1, 2 and 4
    أستخدام الكونسل - وهو عبارة عن منفذ يستخدم فقط للتحكم الفيسكل بالجهاز - ولا يستخدم فى نقل البيانات أو الربط - configuration فقط .
    Explanation: By using router console port you can configure router, can set password and recover password, troubleshooting etc. So, options 1, 2 and 4 are the correct answers. But to route data between networks, you need to define routing protocol. So, option 3 is incorrect. To connect one router to another you need a physical medium. There is no use of console port. So, option 5 is incorrect.
    _____________
    Question No. 02
    Select the statements that correctly describe flash memory in a 2600 series router? (Choose two


    holds the startup configuration by default.1
    2.can be upgraded with single in-line memory modules
    3.stores Cisco IOS software images
    4.stores routing table information by default
    5.maintains the only copy of an IOS image after the router is booted
    Answer:

    Correct answer: 2 and 3
    الفلاش ميمورى المستخدمة فى الروتر - معنى الروتر فى الأساس هو عبارة هن جهاز مثل الكمبيوتر ولا كن يستخدم لسبب معين - وهو عملية الربط بين الشبكات وتوجيه البيانات لمسارها الصحيح ويحتوي على معالج و ذاكرة ووسائط تخزين وأنترفيسس ... وفى هذا السؤال يسأل عن أهميلة نوع الذاكرة من النوع فلاش - كما سوف يتم شرح النوع الغير متطاير - نون فولاتيل .
    والفلاش تحتوى على النسخة المغلقة التى قد يرجع أليها الجهاز فى حالة حدوث مشاكل فى نظام التشغيل أو فى حالى الباسورد ريكفري- استعادة كلمة السر للروتر - و على سبيل المثال فى الأختيار الأول الخاطئة لأن الروتر لا يحتوى على خيارات التحميل الأولى بالعادة على هذه الزاكرة ولاكن يتم تعديل الخيار بطريقة يدوية بالضغط على زر بريك وألت - وهى زاكرة يمكن تحديثها أو عمل أبجريد لها وقد يكون الأبجريد بسبب تطويرات أمنية
    Explanation: Flash memory is an erasable, programmable read-only memory which holds operating system image and microcode. It allows software to be updated without removing any chips and content remain when powered down or restart. For this reason, 2 and 3 are the correct answers.
    ___________________
    Question No. 03
    Which of the following are functions of NVRAM? (Choose two


    1.stores the routing table.
    2.retains contents when power is removed.
    3.stores the startup configuration file.
    4.contains the running configuration file.
    5.stores the ARP table.
    Answer:

    Correct answer: 2 and 3
    من اسم هذه الذاكرة أنها غير متطايرة نون - فولاتيل - ولا تهتم بتخزين قواعد الأتجاهات - ولاكن تظل محتفظة بالكونفجيريشن حتى لو أغلقت الروتر ويحتوى على بينات التحميل مثلا الأسم أو أعدادات الحماية لا تختفي فى حالة غلق الجهاز
    Explanation: NVRAM stores the backup/startup configuration file for the router. It retains conten when the router is powered down or restarted.
    _______________
    Question 04.
    Which of the following descriptions are true regarding the management connections on a Cisco router? (Choose three.


    1.They are non-network connections.
    2.They are used to connect the router to the rest of the production network.
    3.They are synchronous serial ports.
    4.They are used for initial router configuration.
    5.They are asynchronous serial ports.
    6.They are accessed using their assigned IP address.
    Answers:

    Correct answer: 1, 2 and 4
    السؤال يستفسر عن الأعدادات الخاصة لروترات سيسكو - وهى غير فيسيكل - وهذا يعني أنها افتراضية - الفرق بين السوفت وير والهاردوير - الهاردوير فى الشبكات يعني فيسيكل - والسوفت وير بيكون أفرب معنى ليه فيرشوال
    وهنا الاجابات الصحيحة التى تختص بالإدارة للشبكة أو المانيجمينت و هى مهى فعلا لا تعتبر روابط للشبكة وهى تستخدم لتجهيز الروتر للتعامل مع الأجهزة الثانية مثلا لعمل بروتوكول معين مثلا OSPF مع شركات أخرى مثل هواوى أو نوفيل - وهى لا تختص بعمل سينكرونيزنج - وهى تزامن - وهى كما قلنا انها تستخدم فى الكونفيجيريشن الخاصة بالروتر - والأجابة الخامسة عكس الاجابة الثالثة وكما قلنا أن الكونفيجيريشن مانجمينت غير مختصه بالتزامن أو عدمه ولاكن بعد ذلك سوف نتعلم ان التزامن يتم من خلال إعدادت البروتوكولات - ولا يتم التعامل بالأى بي خلال هذه الحالة.
    Explanation: Management connections of Cisco router are used to configuration router. These are non-network connections. So, option 1, 2 and 4 are the correct answers. Option 3 and 4 are not correct because it's not a synchronous or asynchronous serial ports. Management connections has no IP address. So, option 6 is not also the correct answer. So, options 1, 2 and 4 are the correct answers.

    ___________________
    Question No. 05
    An internetwork must include which of the following? (Choose three.


    1.switching.
    2.static addressing.
    3.IETF standardization.
    4.dynamic or static routing.
    5.consistent end-to-end addressing.

    Answer:

    Correct answer: 1, 4 and 5
    ماذا يجب أن تضمنه ؟؟؟ تخيل أنك بحاجة لعمل شبكة ماذا تحتاج - أولا سويتش وبدون روتر - نعم يمكنك أن تعمل شبكة بالبيت بس بسويتش - وتبقي بالحالة دي LAN محدودة - ويجب أن نحدد التوزيع من الطريقة الدينامكية والأستاتيكية والأى تي أف منظمة لتحديد بروتوكول الأتصالات وفى حالة الشبكات البسيطة لاتكن لها وظيفة - ولضمان عمل الشبكات يجب تحديد رقم لكل طرف من أطراف الشبكة - مثل أرقام التليفونات - وهى فى حالة الشبكات الاي بي
    Explanation: Internetwork includes switching, dynamic or static routing and it's capable of addressing at the end-to-end addressing. So, option 1, 4 and 5 are correct. Internetwork doesn't include IETF standardization or static addressing.
    ____________
    Question No. 06
    Which of the following are functions of RAM? (Choose three.


    1.contains startup configuration file.
    2.stores routing table.
    3.holds fast switching cache.
    4.retains contents when power is removed.
    5.stores running configuration file.
    Answer:

    Correct answer: 2, 3 and 5
    كما قلنا ان الروتر مثل أى جهاز حاسب ألى ولاكن لسبب معين - والكثير لايعلم بداية شركة سيسكو - فأول جهاز روتر فى العالم من سيسكو كان أنتاج زوجين أرادا تبادل البيانات بين أجهزتهم الشخصية التى تعمل على نظامين تشغيل مخترفين وقاما بعمل اول جيت او بوابة للتبادل بين نظامين .
    Explanation: Cisco RAM has the following characteristics:

    لازم نحفظ الخصائص دي
    •stores routing information
    •address resolution protocol (ARP)
    •fast-switching cache
    •packet buffering
    •packet hold queues
    •RAM contents are lost if power is down or restarted
    •provides temporary running memory.
    For the above reasons, 2, 3 and 5 options are correct.
    ________________________
    https://img1.51cto.com/attachment/20...0136634984.jpg
    الصورة على هذا اللينك
    Question No. 07
    Terminal emulatror software, such as HyperTerminal, can be used to configure a router. Which of the following HyperTerminal options shown in the graphic are correctly set to allow configuration of a Cisco router? (Choose three.


    1.bits per second.
    2.data bits.
    3.parity.
    4.stop bits.
    5.flow control.
    Answer:
    السؤال يطلب منك ما هى الخصائص الى يجب أن نغيرها لعمل الروتر الداتا بيت + الباريتي + ستوب بيتس
    Correct answer: 2 3 and 4
    _______________
    Question No. 08
    Several Ethernet hosts on a LAN need the gateway services of a Cisco 2500 series router. Which of the following would be needed to physically connect a router to all of the hosts on the LAN? (Choose two.


    1.a crossover cable between the transceiver on a router and a switch.
    2.a crossover cables between a switch and hosts on a LAN.
    3.a straight-through cable between the auxiliary port on a router and a switch.
    4.a rollover cable between the console port on a router and a switch.
    5.straight-through cables between a switch and hosts on a LAN.
    6.a straight-through cable between the transceiver on a router and a switch.

    Answer:

    Correct answer: 5 and 6
    Explanation:
    Straight-through cables are used for the following types of cabling:
    يستخدم الأستريت ثرو كونيكشن فى حالة الربط بين ( أجهزة مختلفة):-
    •switch to router
    •switch to PC or server
    •hub to PC or server

    Crossover cables are used for the following types of cabling:
    الكلروس أوفر بين فى حالة الربط بين ( أجهزة متشابهة عدا الروتر والجهاز):-
    •switch to switch
    •PC to PC
    •hub to hub
    •router to router
    •router to PC
    For the above reasons 5 and 6 are the only true answers.
    ______________
    Question No. 09
    Why is a console connection to a router or switch preferred when troubleshooting? (Choose two.


    1.can be accessed remotely.
    2.does not depend on network services.
    3.displays startup and error messages by default.
    4.does not require special components.
    Answer:

    Correct answer: 2 and 3
    الكونسول - هو عبارة رابطة مباشرة مع الروتر ولا يتم الاتصال بينهم بالبعد ريموتلى ولاكن ديريكت كونيكشن -
    ولأنه ديريكت كونكشن لا تعتمد على قوة الشبكة ولاكن ( الفي تي واى )الفيرشول كونيكشن يعتمد على قوة الشبكة - وهو يعرض البيانات والأخطاء - ولا تحتاج لأجهزة خاصة - ولا كن هى عبارة عن كبل Cable
    Explanation: Console connection doesn't depend on networking services. Moreover, by using this type of connection the startup and error message can be easily captured. That's why 2 and 3 are the correct answers. And the others are not true answers.
    _________________
    Question No. 10
    What do routers use to select the best path for outgoing data packets?
    1.ARP tables.
    2.bridging tables.
    3.routing tables.
    4.switching tables.
    Answer:
    Correct answer: 3
    كيف يعرف الروتر الأتجهات والشبكات ؟؟؟ من خلال الروتينج تيبول - جدول - جدول الأتجاهات لمعرفة الشبكات
    Explanation: Router has a routing table and the routing table is used for outgoing data packets. So, option 3 is the correct answer.
    ______________
    Question No. 11
    Which of the following tasks can be accomplished through a management connection on a router? (Choose three.

    1.troubleshooting problems.
    2.monitoring the system.
    3.capturing LAN data packets.
    4.configuring the router.
    5.routing data packets.
    Answer:

    Correct answer: 1, 2 and 5
    المهمات التى يجب أن نقوم بها عند عمل كونفيجيريشن لأتصالات الشبكات أول تصحيح الأخطاء وثانيا عمل عرض للشبكات - مونيتورينج للشبكة - وخصائصها مثل عرض الباندويدث واليوساج - وتوزيع البينات والباكيجس ( الاجابات الخطئ لا نقوم بعمل كابتشير - أخذ عينات من الشبكات لتجميع المعلومات - مثلا معرفة أكتر البروتوكولات المستخدمة وحجم البيانات - عمل كونفيجيريشن للروتر
    Explanation: By using management connection, you can configure router, troubleshoot and monitor the system. So, 1, 2 and 5 are the correct answers.
    ________________
    Question No. 12
    Which basic components do a router and a standard desktop PC have in common? (Choose three.


    1.CPU.
    2.hard drive.
    3.input/output interfaces.
    4.keyboard.
    5.monitor.
    6.system bus.
    Answer:
    المكونات المتشابهة في كلا الحاسب الألى والروتر (بروسيسور - والانتيرفيسس مثلا الكونسول فى الروتر و وصلات البي اس تو تبع الماوس والكيبورد - لا توجد مونيتور شاشة - سيستم BUS مثل الذي يوجد فى جهاز الحاسب ألالى)
    Correct answer: 1, 3 and 6
    Explanation: A router doesn't have any monitor, keyboard and hard drive. So, 2, 4 and 5 are the incorrect answer. The correct answers are 1, 3 and 6.
    _____________________
    Question No. 13
    Which of the following describes the function of a WAN?


    1.connects peripherals in a single location.
    2.connects multiple networks in a single building.
    3.provides connectivity on a LAN.
    4.provides connectivity over a large geographic area.

    Answer:
    توجد ثلاث أنواع من الشبكات WAN ,LAN,MAN رئيسية - وايد متسعة - لوكال - داخلية - ميدي - متوسطة بين الوان والوكال - الوان تكن فى اكتر من مكان ومتسعة ولا تكن فى مبني واحد ولاكن تكن على نطاق واسع
    Correct answer: 4
    Explanation:WAN means Wide Area Network which connects a large geographical area network. So, 4 is the only one correct answer.
    ______________
    Question No. 14
    ABC Company just purchased three new routers to start their company network. Which items are needed to establish a terminal session between a PC and the router for the initial configuration? (Choose three.


    1.straight-through cable.
    2.terminal emulation software.
    3.rollover cable.
    4.RJ-45 to DB-9 connector.
    5.V.35 cable.
    Answer:
    عند أجراء تعديلات عن الروتر يجب ان يتوافر برنامج التيرمنال أيميولاشن وكابل رول اوفر أو كابل أر جي 45 ودي بي 9 كونيكتور
    Correct answer: 2 3 and 4
    Explanation: To connect a PC and a router, you need one rollover cable, RJ-45 to DB-9 connectors and you need a software which is the terminal emulator software. So, 2, 3 and 4 are the correct answers.
    ____________________
    Question No. 15
    During the initial configuration of a 2600 series Cisco router, which cable is required for connecting a PC to the console port?


    1.twisted
    2.crossover
    3.rollover
    4.straight
    Answer:
    عند ر بط بين الروتر و جهاز الحاسب الألى لعمل كونفيجيريشن يجب الربط برولو أوفير جيبل - ولا ستريت ولا كروس ولا تويستيد بير كما فى السؤال الثامن يوجد نوع كل رابط وفيما يستخدم
    Correct answer: 3
    Explanation: To connect a PC and a router, a crossover cable is used. But when you are configuring your router, then a rollover cable is used. For more explanation, see explanation of question 08.
    _____________
    Question No. 16
    What contains the instructions that a router uses control the flow of traffic through its interfaces?


    1.packet configuration.
    2.configuration files.
    3.flash memory.
    4.internal components.
    Answer:
    يقوم الروتر بحفظ الأوامر والأنستركشن هو الكوفيجيريشن فيل
    Correct answer: 2
    Explanation: Only the configuration file can control the flow of traffic through its interface.So, option 2 is the correct answer.
    ______________________________
    Question No. 17
    Which of the followings are true regarding router interfaces? (Choose three.


    1.provide temporary memory for the router configuration files.
    2.connect the router to the network for packet entry and exit.
    3.can be on the motherboard or a separate module.
    4.hold the IOS image.
    5.connect the router to LANs and WANs.
    Answer:
    وظيفة الأنترفيس للروتر هو أما ربط الروتر بالشبكة أو نيتورك و يمكن أن ربطه بأجهزة أخري أو مكونات وتكن الانترفيس موصله بطريقة مباسشرة بالمزر بورد -اللوحة الام للروتر كما قلنا مثل الجهاز الحاسب الأى وإضافة أى كرت مثل الصوت أو الفاكس أو الان - ومن خلال الانترفيس توجد لان ووان كونيكشن مثال على الان الأيثرنت والفاست والجيجابيت أيثرنت والوان مثل السيريل ولأسمارت سيريل بورت
    Correct answer: 2 3 and 5
    Explanation: By using a router, you can connect LANs and WANS. So, option 5 is correct. All the interfaces are placed on motherboard. So, option 3 is also correct. By using the interfaces the packets are coming and out. So, option 2 is also correct. So, option 2, 3 and 5 are the correct answers.

    _______________________
    Question No. 18
    Which of the following devices are used in the construction of a WAN? (Choose three.


    1.hubs.
    2.routers.
    3.communication servers.
    4.transceivers.
    5.modems.
    6.multi-port repeaters.
    Answer:
    الأجهزة التى تستخدم لعمل الأنفرستركشر لشبكات الوان WAN يجب أن يكون روتر وسيرفرات مثل الدي أتش سي بي أون النات و الدي أن أس - المودم يجب ان يقوم بربط الشبكات مثل الأنترنت
    Correct answer: 2 3 and 5
    Explanation:
    WAN is used to communicate large distance network. So, routers, communication servers and modems are used here. So, 2, 3 and 5 are the correct answers.
    ____________________________
    Question No. 19
    Which router component holds the configuration file when power is lost?


    1.volatile random access memory.
    2.read only memory.
    3.non-volatile random access memory.
    4.flash memory.
    Answer:
    الذاكرة التي تحتوى على كل المعلومات وتحتفظ بها حتى فى حالة إعادة تشغيل الروتر كما شرحنا من قبل هى النون فولاتيل و تعتبر من اهم مكونات الروتر
    Correct answer: 3
    Explanation: See the explanation of question 3.
    _____________________
    Question No. 20
    Which of the following layers of the OSI model are incorporated in WAN standards? (Choose two.


    1.physical layer.
    2.application layer.
    3.transport layer.
    4.data link layer.
    5.session layer.
    Answer:
    الأوسي ليور موضوعها كبير جدا وهى أساس الشبكات ها نشرحها كتير فى طول المنهج بس الأن لا نحتاج من هذا السؤال غير أن الوان كونكشن - تعتمد على طبقتين وهما الفيسيكال ألمسؤلة عن تحويل الأشارات والترددات الكهربية ألى معلومات والداتا لينك لير وهى الطبقة التى تليها مباشرة - يعتبرو رقم واحد و اثنان بالنسبة للمستقبل أو 6 و7 للراسل وسوف نشرحهم بالتفصيل أن شاء الله
    Correct answer: 1, 4
    Explanation: Physical layer, Data Link layer and Network Layer are the incorporated in WAN standards. So, 1 and 4 are the correct answers.

    وبهذا نكون قد انتهينا من الشابتر الأول
    الرجاء عدم التردد فى المناقشة أو الأستفسار عن أى سؤال
    الدرس القادم سوف يكون فى الشبتر الثانى -
    بالتوفيق للجميع وأن كان خير فمن الله
    السلام عليكم
    أحمد الطيب
    الزمن جّواد
    أَبدِيُّ الركض
    إن سابقته فزت
    وإن سايرته وصلت
    وإن عنه تقاعست داسك
    وتخلفت
    فمكانك من الزمن
    هو مكانتك فى الحياة
    وهي حيثما
    لنفسك أخترت
    (من صدْق الله صْدَقهُ الله)

  2. #2
    عضو
    تاريخ التسجيل
    Apr 2008
    المشاركات
    311
    الدولة: -- من فضلك اختر البلد --
    معدل تقييم المستوى
    16

    رد: CCAN سؤال وجواب وشرح - طريقة جديدة للتعليم والمراجعة بالنسبة للمبتدئين والمحترفين

    يا عينني عليك يا ملك
    الطريقة مفيدة
    بالنسبة الى على الاقل
    شكرا

  3. #3
    عضو الصورة الرمزية ahmed Eltayeb
    تاريخ التسجيل
    Sep 2005
    المشاركات
    14
    معدل تقييم المستوى
    0

    رد: CCAN سؤال وجواب وشرح - طريقة جديدة للتعليم والمراجعة بالنسبة للمبتدئين والمحترفين

    شكرا على ردك وأنشاء الله قريب ها أنزل بقية الشباتر وأتمنى يكون عجبك الطريقة دى
    الزمن جّواد
    أَبدِيُّ الركض
    إن سابقته فزت
    وإن سايرته وصلت
    وإن عنه تقاعست داسك
    وتخلفت
    فمكانك من الزمن
    هو مكانتك فى الحياة
    وهي حيثما
    لنفسك أخترت
    (من صدْق الله صْدَقهُ الله)

  4. #4
    عضوية جديدة
    تاريخ التسجيل
    Mar 2010
    المشاركات
    23
    معدل تقييم المستوى
    0

    رد: CCAN سؤال وجواب وشرح - طريقة جديدة للتعليم والمراجعة بالنسبة للمبتدئين والمحترفين

    طبعا كويسه بس متنفعش شرح لواحد مش دارس لكن مراجعه وتقوية معلومه وتدريب قويه جدا طبعا ... بس يارب تجمد وتكمل

  5. #5
    عضوية جديدة
    تاريخ التسجيل
    Jul 2009
    المشاركات
    9
    معدل تقييم المستوى
    0

    رد: CCAN سؤال وجواب وشرح - طريقة جديدة للتعليم والمراجعة بالنسبة للمبتدئين والمحترفين

    شكرااااا جزيلا يا اخي و الله معلومات قوية و طريقة راءعة من انسان راءع... والله ابدعت و احسنت بركت يا اخي ..و الله معلومات قوية لبد من ترسيخها... ساتبتها في دماغي كلها ان شاء الله

المواضيع المتشابهه

  1. مشاركات: 1
    آخر مشاركة: 11-04-2010, 12:03
  2. مشاركات: 3
    آخر مشاركة: 23-03-2010, 01:19

الكلمات الدلالية لهذا الموضوع

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •