الحل ان سيسكو تغيرلك البوردة بتاعت الراوتر طبعا بمبلغ و قدره و بالنسبة للحل اللى بعتتهولك سيسكو ده علشان تقدر تشوف الكزنفجرشن اللى على الروتر بس مش اكتر من كدا
مشكله كبيره No password recovery
السلام عليكم يا اخوان ,,,
فى عندى مشكله كبيره يريت لو حد من اخوانى يبادر و يساعدنى فى الرد يريت لو الان على طول
المشكله كالاتى :
انا معايا روتر وفى واحد عامل عليه باسوورد وكمان عامل enable No password recovery يعنى مانع انى
اعرف اعمله Password recover واانا عمال براسل سيسكو والحل اللى اديهولى كلالتى
قالولى ادوس Break بعد Image decompression لمده خمس ثوانى وانا بعمل كدا لكن مفيش نتيجه والحل
بالتفصيل زى ما بعتهولى اهو
Recovering a Device
To recover a device once the No Service Password-Recovery feature has been enabled, press the Break key within 5 seconds after the image decompresses during the boot. You are prompted to confirm the Break key action. When you confirm the action, the startup configuration is erased, the password-recovery procedure is enabled, and the router boots with the factory default configuration.
If you do not confirm the Break key action, the router boots normally with the No Service Password-Recovery feature enabled.
Examples
This section provides the following examples of the process:
•Confirmed Break
•
Confirmed Break
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
program load complete, entry point: 0x80013000, size: 0x8396a8
Self decompressing the image : ################################################## ####################
################################################## #################### [OK]
!The 5 second window starts now.
telnet> send break
telnet> send break
telnet> send break
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C831 Software (C831-K9O3SY6-M), Version 12.3(YA
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Fri 13-Aug-04 03:21
Image text-base: 0x80013200, data-base: 0x81020514
PASSWORD RECOVERY IS DISABLED.
Do you want to reset the router to factory default configuration and proceed [y/n] ?
!The user enters "Y" here.
Reset router configuration to factory default.
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
https://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to export@cisco.com.
Cisco C831 (MPC857DSL) processor (revision 0x00) with 46695K/2457K bytes of memory.
Processor board ID 0000 (1314672220), with hardware revision 0000 CPU rev number 7
3 Ethernet interfaces
4 FastEthernet interfaces
128K bytes of NVRAM.
24576K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
!Start up configuration is erased.
SETUP: new interface FastEthernet1 placed in "up" state
SETUP: new interface FastEthernet2 placed in "up" state
SETUP: new interface FastEthernet3 placed in "up" state
SETUP: new interface FastEthernet4 placed in "up" state
Press RETURN to get started!
Router>
Router> enable
Router# show startup configuration
startup-config is not present
Router# show running-config | incl service
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!The "no service password-recovery" is disabled.
Recovering a Device
To recover a device once the No Service Password-Recovery feature has been enabled, press the Break key within 5 seconds after the image decompresses during the boot. You are prompted to confirm the Break key action. When you confirm the action, the startup configuration is erased, the password-recovery procedure is enabled, and the router boots with the factory default configuration.
If you do not confirm the Break key action, the router boots normally with the No Service Password-Recovery feature enabled.
Examples
This section provides the following examples of the process:
•
•
Confirmed Break
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
program load complete, entry point: 0x80013000, size: 0x8396a8
Self decompressing the image : ################################################## ####################
################################################## #################### [OK]
!The 5 second window starts now.
telnet> send break
telnet> send break
telnet> send break
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C831 Software (C831-K9O3SY6-M), Version 12.3(
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Fri 13-Aug-04 03:21
Image text-base: 0x80013200, data-base: 0x81020514
PASSWORD RECOVERY IS DISABLED.
Do you want to reset the router to factory default configuration and proceed [y/n] ?
!The user enters "Y" here.
Reset router configuration to factory default.
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
https://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to export@cisco.com.
Cisco C831 (MPC857DSL) processor (revision 0x00) with 46695K/2457K bytes of memory.
Processor board ID 0000 (1314672220), with hardware revision 0000 CPU rev number 7
3 Ethernet interfaces
4 FastEthernet interfaces
128K bytes of NVRAM.
24576K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
!Start up configuration is erased.
SETUP: new interface FastEthernet1 placed in "up" state
SETUP: new interface FastEthernet2 placed in "up" state
SETUP: new interface FastEthernet3 placed in "up" state
SETUP: new interface FastEthernet4 placed in "up" state
Press RETURN to get started!
Router>
Router> enable
Router# show startup configuration
startup-config is not present
Router# show running-config | incl service
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!The "no service password-recovery" is disabled.
الحل ان سيسكو تغيرلك البوردة بتاعت الراوتر طبعا بمبلغ و قدره و بالنسبة للحل اللى بعتتهولك سيسكو ده علشان تقدر تشوف الكزنفجرشن اللى على الروتر بس مش اكتر من كدا
سبحان الله و بحمده سبحان الله العظيم
رد: مشكله كبيره No password recovery
ويريتها قدرت يا باشاالمشاركة الأصلية كتبت بواسطة wessam gharip
دا هما كانو معايا على التليفون و دخلو على الكمبيوتر بتاعى زى ال Team viewer كدا و معرفوش يعملو اى حاجه !!
الحل انهم يغيرو البردة بتاعت الروتر زى ما قولتلك او تستعوض ربنا فى الراوتر
سبحان الله و بحمده سبحان الله العظيم
رد: مشكله كبيره No password recovery
على فكره فعلا سيسكو ردت علينا بأن مفيش حل
بسم الله والحمد لله والصلاة والسلام علي رسول الله وآله وصحبه وإخوانه أجمعين
الحل بسيط جداً أخي الكريم إن شاء الله
انت تجيب عدد 3 شومة وعدد 4 سيوف وتأجر 5 بلطجية ب20 جنيه في الساعة و تروح ويإما الدفع يإما الدبح
وصلي الله وسلم وبارك علي المصطفي وآله وصحبه وإخوانه أجمعين
[CENTER][SIZE=4][COLOR=Blue]اللهم صلي على محمد وعلى آل محمد كما صليت على آل إبراهيم وبارك على محمد وعلى آل محمد كما باركت على آل إبراهيم في العالمين إنك حميد مجيد[/COLOR][/SIZE]
[B][SIZE=4]اللهم احفظ مصر آمنة مطمئنة وسائر بلاد المسلمين
اللهم قنا الفتن ما ظهر منا وما بطن
[/SIZE][/B]
[/CENTER]
رد: مشكله كبيره No password recovery
اصلها فعلا حاجه تزعل لما شركه كبيره تفشل فى دعم منتجها !!!!!
بسم الله والحمد لله والصلاة والسلام علي رسول الله وآله وصحبه وإخوانه أجمعين
طيب يا أخي محاولتش ترجعه ولا انت مشترية من الخارج
وصلي الله وسلم وبارك علي المصطفي وآله وصحبه وإخوانه أجمعين
[CENTER][SIZE=4][COLOR=Blue]اللهم صلي على محمد وعلى آل محمد كما صليت على آل إبراهيم وبارك على محمد وعلى آل محمد كما باركت على آل إبراهيم في العالمين إنك حميد مجيد[/COLOR][/SIZE]
[B][SIZE=4]اللهم احفظ مصر آمنة مطمئنة وسائر بلاد المسلمين
اللهم قنا الفتن ما ظهر منا وما بطن
[/SIZE][/B]
[/CENTER]
ممكن توضح كلمة السر وين موجودة بالضبط لاني متل مالي شايف من خلال الأعدادات أنك قادر على الدخول على الـ EXEC-mode
ضوابط المشاركة
المفضلات