Which four types of high-density trunk can be used to connect to an ITSP? (Choose four)
A. T1/E1 CAS
B. FXS
C. T1/E1 PRI
D. E&M
E. SIP
F. H.323
على ما اعتقد ان الجواب A C E F ممكن الشرح برضوا
__________________________________________________ _______________________________________
Which two are considered endpoints in a Cisco Unified Communications solution? (Choose two)
A. Gateway
B. Call agent
C. IP telephone
D. Analog phone
E. H.323 gatekeeper
F. Cisco Unified Communications Manager
__________________________________________________ _____________________________________
Refer to the exhibit.
************************************************** **************************************
UCME#show ephone
ephone-1 Mac:0000.94C2.8A44 TCP socket:[2] activeLine:0 REGISTERED in SCCP ver 1 1 and Server in ver 8
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
IP:10.3.130.10 50374 Telecaster 7960 keepalive 4 max_line 6
button 1: dn 1 number 5001 CH1 IDLE CH2 IDLE mwi
button 2: dn 3 number 5010 CH1 IDLE CH2 IDLE
ephone-2 Mac:0003.E3C4.463C TCP socket:[-1] activeLine:0 DECEASED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:7
IP:10.3.130.12 49939 Telecaster 7960 keepalive 5162 max_line 6
button 1: dn 2 number 5002 CH1 DOWN CH2 DOWN
button 2: dn 3 number 5010 CH1 IDLE CH2 IDLE shared
************************************************** *************************************
What information can be gleaned from the output of the show ephone command?
A. There are two registered IP phones. Shared number 5010 on line 2. Message waiting on line 1 of phone 1.
B. There are two registered IP phones. Shared number 5010 on line 2. Message waiting on shared line.
C. There are two IP phones. Phone 2 is unregistered. Shared number 5010 on line 2. Message waiting on shared line.
D. There are two IP phones. Phone 2 is unregistered. Shared number 5010 on line 2. Message waiting on line 1 of phone 1.
E. There are two IP phones. Phone 2 is unregistered. Shared number 5010 on line 2 of phone 2. Message waiting on line 2 of phone 1.
__________________________________________________ _____________________________________
Which type of voice port will be most cost effective to allow the gateway to terminate two circuits from the PSTN or a PBX?
A. FXO
B. FXS
C. PRI T1
D. E1
E. E&M
F. BRI
G. CAS T1
H. E1
__________________________________________________ _____________________________________
المفضلات