سوف نقوم بمساعدة الاعضاء فى عمليات كسر السرعة من خلال BIOS عن طريق وضع TEMPLATE لمعظم او اشهر اللوحات
وذلك لتسهيل عملية الشرح من خلال هذه ال قوالب
و ستكون هذه القوالب على الوضع الافتراضى كل ما نقوم به هو نسخها الى الموضوع مع ذكر الاتى
1- المعالج - النوع - رقم الموديل
2- الذواكر - النوع - الموديل - التردد - الناقل
لكى تسهل على الاخوة المحترفين عملية الشرح
و سوف يتم تحديث هذه القوالب بأستمرار


سوف نبدأ اولا بلوحات GIGABYTE

بالنسبة للوحات X58


كود PHP:
Advanced CPU Features
كود PHP:
[CENTER]CPU Clock Ratio ................................ [20x]
Intel(RTurbo Boost Tech .................. [Enabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
Bi
-Directional PROCHOT ..................... [Enabled]


Uncore QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency 
..........................  (Always 2x memory Multi or 2x +1)
Isonchronous Frequency ..................[Enabled]


Standard Clock Control:
Base Clock (BCLKControl ................ [Enabled]
BCLK Frequency (MHz) .....................
PCI Express Frequency (MHz) ........... [100]

C.I.A.2 [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]


Advanced DRAM Features:
Performance Enhance ...................... [Standard]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [AUTO]
DRAM Timing Selectable (SPD) .......... [Manual]

Channel A C

Channel A Timing Settings
:
##Channel A Standard Timing Control##
CAS Latency Time ......................
tRCD .......................................
tRP .........................................
tRAS .......................................

##Channel A Advanced Timing Control##
tRC ........................................  (Should be tRAS tRP or above for stability)
tRRD .......................................
tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL 4)
tWR ........................................
tWTP .......................................   (tWTP Must tWR tWL 4)
tWL ........................................    (tWL Must be CAS Latency -1)
tRFC .......................................
tRTP .......................................
tFAW ......................................
Command Rate (CMD) ................

##Channel A Misc Timing Control##
Round Trip Latency ...................

B2B CAS Delay ..........................


Advanced Voltage Control:

CPU
Load Line Calibration 
................. [Disabled]
CPU Vcore ...............................
QPI/VTT Voltage 1.150v ............
CPU PLL 1.800v .......................

MCH/ICH
PCIE 1.500v 
...........................
QPI PLL 1.100v .......................
IOH Core 1.100v .....................
ICH I/O 1.500v .......................
ICH Core 1.1v ........................

DRAM
DRAM Voltage 1.500v 
..............
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef0.750v [AUTO]
Ch-B Data VRef0.750v [AUTO]
Ch-C Data VRef0.750v [AUTO]
Ch-A Address VRef0.750v [AUTO]
Ch-B Address VRef0.750v [AUTO]
Ch-C Address VRef0.750v [AUTO][/CENTER

اما اللوحات P55 & P57


كود PHP:
Advanced Frequency Settings


كود PHP:
[CENTER]
CPU Clock Ratio 21x

Advanced Core Features  
[Press Enter]:

Intel(RTurbo Boost Tech................[Disabled]
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Disabled]
CPU Enhanced Halt (C1E)..................[Auto]
C3/C6/C7 State Support...................[Auto]
CPU Thermal Monitor......................[Auto]
CPU EIST Function........................[Auto]
Bi-Directional PROCHOT...................[Auto]

QPI Clock Ratio..........................[Auto]
QPI Link Speed........................[x]
Uncore Clock Ratio....................[18x]
Uncore Frequency.........................3600MHz

>>>>>   Standard Clock Control <<<<<

Base Clock (BCLKControl................[Enabled]
BCLK Frequency ..........................[200]
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[Disabled]
Memory Frequency (MHz)................2000
PCI Express Frequency 
(MHz)..............[Auto]
C.I.A.2..................................[Disabled]

>>>>>   
Advanced Clock Control   <<<<<

CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[    0ps]

Advanced Memory Settings:

Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[10.0]
Memory Frequency (MHz)................2000
Performance Enhance   
(SPD)............. [Turbo]
DRAM Timing Selectable (SPD)............ [Expert]
Profile DDR Voltage ..................
Profile QPI Voltage ..................
Channel Interleaving.....................[Auto]
Rank Interleaving........................[Auto]

>>>>>   
Channel A B

Channel A Timing Settings            
[Press Enter]:
Cas Latency Time........................[8]
tRCD....................................[8]
tRP.....................................[9]
tRAS...................................[24]

>>>>>   
Advanced Timing Control

tRC
....................................[Auto]
tRRD...................................[Auto]
tWTR...................................[Auto]
tWR....................................[Auto]
tWTP...................................[Auto]
tWL....................................[Auto]
tRFC...................................[Auto]
tRTP...................................[Auto]
tFAW...................................[Auto]
Command Rate (CMD).................. [1]

>>>>>   
Misc Timing Control

B2B Cas Delay
..........................[Auto]
Round Trip Latency.....................[Auto]

Channel A Turnaround Settings [Press Enter]:
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]

>>>>>   
Channel A Writes Followed By Writes

Different DIMMs
........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]


Advanced Voltage Settings:

******
Mother Board Voltage Control ******
Voltage Types............Normal......Current
--------------------------------------------

>>> 
CPU
Load Line Calibration
...................[Level 2]
CPU Vcore..................1.19375v..[1.xv]
QPI/VTT Voltage..........1.100v.....[1.x00v]

>>> 
MCH/ICH
PCH Core
....................1.050v.....[Auto]
CPU PLL......................1.800v.....[Auto]

>>> 
DRAM
DRAM Voltage
..............1.500v.....[1.660v]
DRAM Termination.........0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]


Miscellaneous Settings:[/SIZE]

Isochronous Support....................[Enabled]
Virtualisation technology..............[Enabled]
USB Storage Detect ....................[DisabledLocated In Integrated Peripherals Page[/CENTER


P45 / P43


وأيضا متشابهة الى حد ما مع G45/G43



كود PHP:
MB Intelligent Tweaker(M.I.T.) 


كود PHP:
[CENTER]Robust Graphics Booster ...............: Auto or Fast
CPU Clock Ratio 
..........................: 
Fine CPU Clock Ratio.....................:.0
CPU Frequency 
...........................: 


Clock Chip Control 
Standard Clock Control
CPU Host Clock Control
..................: [Enabled
CPU Host Frequency (Mhz) ............: Mhz
PCI Express Frequency 
(Mhz) .........:Set to 100

C
.I.A.2 .................................:[Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive
.................: <<< 900
CPU Clock Skew 
(ps)....................: <<< 
MCH Clock Skew (ps)...................: <<< 


DRAM Performance Control
Performance Enhance
...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: 
Memory Frequency (Mhz) ..............: 
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time
........................
tRCD .........................................
tRP'...........................................
tRAS..........................................

Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go

Advanced Timing Control
tRRD...........................................
tWTR..........................................
tWR............................................
tRFC...........................................
tRTP...........................................
Command Rate (CMD) ....................:2

Driving Strength Profiles
Driving Strength ............................

Channel A
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
 tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

Channel B
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
 tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

Motherboard Voltage Control

CPU
CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages

CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking

CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking

CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 

CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 

MCH/ICH
MCH Core…………….....1.100V...........: << 
MCH Reference….…….0.760V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.500V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave

DRAM
DRAM Voltage ……....1.800V............: 
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

Integrated Peripherals
Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB[/CENTER] 


X35 / X38 / X48


و ايضا تتشابه مع P31/G31/965P



كود PHP:
Robust Graphics Booster___________ [Auto


كود PHP:
[CENTER]CPU Clock Ratio ____________ [8
Fine Clock Ratio ____________[0.5]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [450
PCI Express Frequency (Mhz)_______ [100]
C.I.A2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.00]
DRAM Timing Selectable_______ SPD __ [Manual]

Performance Enhance = [Standard]

CAS Latency Time________________ 
Dram RAS
# to CAS# Delay_________ 
Dram RAS# Precharge Delay_______
Precharge Delay (tRAS)__________ 

ACT to ACT Delay 
(tRRD)_________ 
Rank Write to READ Delay________ 
Write to Precharge Delay_________ 
Refresh to ACT Delay______________ 
Read to Precharge Delay__________
Static tRead Value_______________
Static tRead Phase Adjust________ [Auto]

CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [normal]
GMCH Clock Skew Control [Normal]

System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.300V
PCI-E OverVoltage Control_ [+0.1V
FSB OverVoltage Control___ [+0.1V
(
G)MCH OverVoltage Control [+0.1V
CPU Voltage Control_______ [1.25]

Limit CPUID Maxto 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [DisabledEnabled if you use Vmware/Virtual PC

Integrated Peripherals
Legacy USB Storage Detect___________________
[Disabled] *NoteMust be enabled to flash from USB[/CENTER
ننتقل الى Asus Rampage III Extreme

كود PHP:
Target CPU Frequency        2666MHz
Target DRAM Frequency        1603MHz
LN2 Mode
:            Disabled***
QPI Loadline Calibration:    Enabled
***Sync Mode            [Enabled]
AI Overclock Tuner        [Manual]
OC From CPU level Up        [Auto]
CPU Ratio Setting        [20.0]
CPU Turbo Power Limit        [Disabled]
 
>
CPU Configuration-
CPU Ratio Setting        [20.0]
C1E Support            [Enabled]
Hardware Prefetcher        [Enabled]
Adjacent Cache Line Prefetcher    [Enabled]
Intel(RVirtualiyation Tech    [Enabled]
CPU TM Function            [Disabled]
Execute Disable Bit        [Enabled]
Intel(RHT Technology        [Enabled]
Active Processor Cores        [All]
A20M                [Disabled]
Intel(RSpeedStep(TMTech    [Enabled]
Intel(RC-STATE Tech        [Enabled]
C State package limit setting    [Auto]-
BCLK Frequency            [133]
PCIE Frequency            [100]
DRAM Frequency            [1603]
UCLK Frequency            [3209]
QPI Link Data Rate        [AUTO]
Memory Configuration Protect    [Disabled]
 
>
DRAM Timing Control
CAS
# Latency              9    [9]
RAS# to CAS# Delay          9    [9]
RAS# PRE Time              9    [9]
RAS# ACT Time             24    [24]
RAS# to RAS# Delay          6    [AUTO]
REF Cycle Time             110    [110]
WRITE Recovery Time         15    [15]
READ to PRE Time          9    [9]
FOUR ACT WIN Time         31    [31]
Back-To-BackCAS# Delay          0    [Auto]
Timing Mode             1N    [1N]
Round Trip Latency on CHA        [AUTO]
Round Trip Latency on CHB        [AUTO]
Round Trip Latency on CHC        [AUTO]
WRITE To READ Delay(DD)          8    [Auto]
WRITE To READ Delay(DR)          8    [Auto]
WRITE To READ Delay(SR)         18    [Auto]
READ To WRITE Delay(DD)          7    [Auto]
READ To WRITE Delay(DR)          7    [Auto]
READ To WRITE Delay(SR)          7    [Auto]
READ To READ Delay(DD)          7    [Auto]
READ To READ Delay(DR)          6    [Auto]
READ To READ Delay(SR)          4    [Auto
]WRITE To WRITE Delay(DD)      8    [Auto]
WRITE To WRITE Delay(DR)      8    [Auto]
WRITE To WRITE Delay(SR)     18    [Auto]
CPU Differential Amplitude    [Auto]
CPU Clock Skew            [Auto]
IOH Clock Skew            [Auto]
 
 
Extreme Engine Digi+
 
DigiPWR Mode
  
[T-Balanced]
PWR VoltControl        [Auto]
Load-Line Calibration        [Full]
CPU Voltege OCP            [Enabled]
CPU PWM Frequency        [1000kHz]
Extreme OV            [Disabled]
Extreme OC            [Auto]
CPU Voltage        1.250    [1.25000]
CPU PLL Voltage     1.812    [Auto]
QPI/DRAM Core Voltage    1.350    [1.35000]
DRAM Bus Voltage    1.654    [Auto]
 
>
DRAM REF Voltages
DRAM DATA REF Voltage on CHA    
[Auto]
DRAM CTRL REF Voltage on CHA    [Auto]
DRAM DATA REF Voltage on CHB    [Auto]
DRAM CTRL REF Voltage on CHB    [Auto]
DRAM DATA REF Voltage on CHC    [Auto]
DRAM CTRL REF Voltage on CHC    [Auto]
IOH Voltage        1.244    [Auto]
IOH PCIE Voltage    1.508    [Auto]
ICH Voltage        1.111    [Auto]
ICH PCIE Voltage        [Auto]
Spread Spectrum Control CPU Spread Spectrum        [Disabled]
DRAM Spread Spectrum        [Disabled]
***
on-board jumper dependant 
سوف يتم اضافة المزيد من القوالب تباعا