سؤال بخصوص رام Transcend aXeRam
للإضافة هذه مواصفات الرام Transcend aXeRam 4GB DDR3-1600+ CL8 Dual Channel Kit
The TX1600KLU-4GK consists of 2pcs 2GB DDR3 SDRAM modules. The 2GB module is a 128M x 64bits DDR3-1600 Unbuffered DIMM. The 2GB module consists of 16pcs 128Mx8bits DDR3 SDRAMs in FBGA packages and a 2048 bits serial EEPROM on a 240-pin printed circuit board. The TX1600KLU-4GK is a Dual In-Line Memory Module and is intended for mounting into 240-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
Specifications
? RoHS compliant products.
? Tested at SPD settings (8-8-8-24) at 1.6V at
1600MHz
? SPD programmed at:
JEDEC standard (9-9-9-24) at 1.5V at 1333MHz
XMP support (8-8-8-24) at 1.6V at 1600MHz
? Max clock Freq: 800MHZ; 1600Mb/S/Pin.
? VDDQ=1.5V ? 0.075V
? Programmable CAS Latency: 8
? 8 bit pre-fetch
? Burst Length: 4, 8
? Bi-directional Differential Data-Strobe
? Internal calibration through ZQ pin
? On Die Termination with ODT pin
? Serial presence detect with EEPROM
? Asynchronous reset
المشاركة الأصلية كتبت بواسطة ZEX
المفضلات