السلام عليكم
Class A - This class is for very large networks, such as a major international company might have. IP addresses with a first octet from 1 to 126 are part of this class. The other three octets are used to identify each host. This means that there are 126 Class A networks each with 16,777,214 (224 -2) possible hosts for a total of 2,147,483,648 (231) unique IP addresses. Class A networks account for half of the total available IP addresses. In Class A networks, the high order bit value (the very first binary number) in the first octet is always 0.
Net Host or Node
115. 24.53.107
Loopback - The IP address 127.0.0.1 is used as the loopback address. This means that it is used by the host computer to send a message back to itself. It is commonly used for troubleshooting and network testing.
Class B - Class B is used for medium-sized networks. A good example is a large college campus. IP addresses with a first octet from 128 to 191 are part of this class. Class B addresses also include the second octet as part of the Net identifier. The other two octets are used to identify each host. This means that there are 16,384 (214) Class B networks each with 65,534 (216 -2) possible hosts for a total of 1,073,741,824 (230) unique IP addresses. Class B networks make up a quarter of the total available IP addresses. Class B networks have a first bit value of 1 and a second bit value of 0 in the first octet.
Net Host or Node
145.24. 53.107
Class C - Class C addresses are commonly used for small to mid-size businesses. IP addresses with a first octet from 192 to 223 are part of this class. Class C addresses also include the second and third octets as part of the Net identifier. The last octet is used to identify each host. This means that there are 2,097,152 (221) Class C networks each with 254 (28 -2) possible hosts for a total of 536,870,912 (229) unique IP addresses. Class C networks make up an eighth of the total available IP addresses. Class C networks have a first bit value of 1, second bit value of 1 and a third bit value of 0 in the first octet.
Net Host or Node
195.24.53. 107
Class D - Used for multicasts, Class D is slightly different from the first three classes. It has a first bit value of 1, second bit value of 1, third bit value of 1 and fourth bit value of 0. The other 28 bits are used to identify the group of computers the multicast message is intended for. Class D accounts for 1/16th (268,435,456 or 22of the available IP addresses.
Net Host or Node
224. 24.53.107
Class E - Class E is used for experimental purposes only. Like Class D, it is different from the first three classes. It has a first bit value of 1, second bit value of 1, third bit value of 1 and fourth bit value of 1. The other 28 bits are used to identify the group of computers the multicast message is intended for. Class E accounts for 1/16th (268,435,456 or 22
Net Host or Node
240. 24.53.107
Broadcast - Messages that are intended for all computers on a network are sent as broadcasts. These messages always use the IP address 255.255.255.255.
________________________________
نقلته من موقع https://computer.howstuffworks.com/question549.htm
المفضلات