Network Loop Problem

[nabaweka]

السلام عليكم


انا عندى مشكله فى النتورك ... بعمل بنج على 10.1.1.100 يرد عليا بـ Reply from 10.2.10.254: TTL expired in transit.

عملت سرش فى جوجل كتير ولقت ان فى لووب فى النتورك
https://www.corenetworkz.com/2011/05/ttl-expired-in-transit-reason-and.html

مش عارف اعمل اييييييييييه

دى الروتنج تابل


Gateway of last resort is 10.2.11.252 to network 0.0.0.0


172.16.0.0/30 is subnetted, 3 subnets
R 172.16.1.8 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 172.16.1.4 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 172.16.1.0 [120/1] via 10.2.13.253, 00:00:14, Vlan13
[120/1] via 10.2.2.253, 00:00:25, Vlan10
C 129.41.0.0/16 is directly connected, Vlan1
10.0.0.0/8 is variably subnetted, 23 subnets, 2 masks
S 10.2.9.0/24 [1/0] via 10.2.11.252
R 10.1.10.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
C 10.2.10.0/24 is directly connected, Vlan1
R 10.3.10.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
C 10.2.11.0/24 is directly connected, Vlan12
C 10.2.13.0/24 is directly connected, Vlan13
S 10.2.1.0/24 [1/0] via 10.2.11.252
C 10.2.2.0/24 is directly connected, Vlan10
R 10.2.30.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.3.30.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.2.31.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.2.17.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.3.20.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.2.21.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.1.21.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.2.23.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.2.40.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.2.41.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.3.61.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.3.60.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.3.50.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
R 10.3.64.0/24 [120/2] via 10.2.13.253, 00:00:14, Vlan13
[120/2] via 10.2.2.253, 00:00:25, Vlan10
S 10.1.1.100/32 [1/0] via 10.2.10.254
C 192.168.70.0/24 is directly connected, GigabitEthernet0/2
S* 0.0.0.0/0 [1/0] via 10.2.11.252


مشكورييييييييييييين
نـــبـــوى

[eng_eslam_comm2]

السلام عليكم ورحمة الله وبركاته

بص المشكلة كدة مش واضحة اوي لاننا مش عارفين الاي بي اللي بيجيلك منه الريبلاي ده اللي هو (10.2.10.254) ده عبارة عن ايه او موجود فين...فعشان بس تحد المشكلة اكتر ممكن تعمل كدة

show ip route 10.2.10.254

وبعدين تاني حاجة عشان تعرف المسار اللي الباكيت بتمشي فيه عشان توصل للاي بي اللي انت عايز توصله (10.1.1.100)...اعمل

traceroute 10.1.1.100

شوف النتايج اللي هتطلع وابعتهالنا كدة ونشوف