السلام عليكم

اشتريت هارد ماكستور 40 جيجا 7200 ونوعه ide ليس ساتا ولكن عندما اريد التسجيل في موقع

الشركة يطلب الرقم المسلسل للهارد وادخله ويقول لي رقم خطأ .. ولاحظ ان ايفرست يسمي هذا الماكستور ب max فقط بدون اسم للعائلة diamond او غيرها ورقمه التسلسلي كله ارقام ولا يبدأ بحرف

عكس الهارد السابق وهو نفسه تماما نوعه ماكستور 40 جيجا و ide ولكن عند الفحص ب ايفرست يظهر maxtor واسم العائلة diamond 8 والرقم المسلسل يبدأ بحرف e ثم ارقام وعندما سجلته بالشركة قبل الموقع الرقم صحيحا

فهل الجديد مقلد وانكشف بالصدفة بسبب التسجيل ؟؟

كيف اتاكد

هذي بيانات الهارد الجديد المشكوك في امره



ATA Device Properties:
Model ID MAX
Serial Number 79000000000000000000
Revision NAR61590
Parameters 79656 cylinders, 16 heads, 63 sectors per track, 512 bytes per sector
LBA Sectors 80293248
Buffer 2 MB (Dual Ported, Read Ahead)
Multiple Sectors 16
ECC Bytes 57
Max. PIO Transfer Mode PIO 4
Max. UDMA Transfer Mode UDMA 6 (ATA-133)
Active UDMA Transfer Mode UDMA 5 (ATA-100)
Unformatted Capacity 39206 MB

ATA Device Features:
SMART Supported
Security Mode Not Supported
Power Management Supported
Advanced Power Management Supported
Write Cache Supported
Host Protected Area Supported
Power-Up In Standby Not Supported
Automatic Acoustic Management Supported
48-bit LBA Supported
Device Configuration Overlay Supported


وهذي بيانات القديم وهو نفس الموديل والفرق واضح :

[ Maxtor 6E040L0 (E12VAS2E) ]

ATA Device Properties:
Model ID Maxtor 6E040L0
Serial Number E12VAS2E
Revision NAR61590
Parameters 79656 cylinders, 16 heads, 63 sectors per track, 512 bytes per sector
LBA Sectors 80293248
Buffer 2 MB (Dual Ported, Read Ahead)
Multiple Sectors 16
ECC Bytes 57
Max. PIO Transfer Mode PIO 4
Max. UDMA Transfer Mode UDMA 6 (ATA-133)
Active UDMA Transfer Mode UDMA 5 (ATA-100)
Unformatted Capacity 39206 MB

ATA Device Features:
SMART Supported
Security Mode Supported
Power Management Supported
Advanced Power Management Supported
Write Cache Supported
Host Protected Area Supported
Power-Up In Standby Not Supported
Automatic Acoustic Management Supported
48-bit LBA Not Supported
Device Configuration Overlay Supported

ATA Device Physical Info:
Manufacturer Maxtor
Hard Disk Family DiamondMax Plus 8
Form Factor 3.5"
Formatted Capacity 40 GB
Disks 1
Recording Surfaces 1
Physical Dimensions 146.1 x 101.6 x 17.5 mm
Max. Weight 510 g
Average Rotational Latency 4.17 ms
Rotational Speed 7200 RPM
Interface Ultra-ATA/133
Buffer-to-Host Data Rate 133 MB/s
Buffer Size 2 MB

ATA Device Manufacturer:
Company Name Maxtor Corporation
Product Information https://www.maxtor.com/en/products/