النتائج 1 إلى 6 من 6

الموضوع: Bowler CBT Labs - Juniper Series 1

  1. #1
    عضو
    تاريخ التسجيل
    Oct 2007
    المشاركات
    20
    الدولة: Egypt
    معدل تقييم المستوى
    0

    Bowler CBT Labs - Juniper Series 1



    Bowler CBT Labs - Juniper Series 1

    English | Duration: 11.5h | H264 | 1020x768 | 15fps 333kbps | AAC 44.1KHz | 1.37GB
    Genre: eLearning
    Are you studying for Juniper Certifications? Are you just looking to brush up your skills on Juniper routers and looking for some good lab tutorial videos? Then these videos are for you. Over 1 Gig of Video Training in .MP4 file format presented on 1 DVD. 20 total videos and over 11 1/2 hours of High Quality in depth training based solely around Lab Tutorials in which we configure/troubleshoot and verify in a step-by-step easy to follow and understand method.

    These labs are based strictly around configuring routers using the Juniper Command Line Interface (CLI) and are accompanied by easy to follow network topologies designed by myself. There are no theory based videos. Studies have proven that hands on training is the best and most efficient way to learn and that is strictly what I offer. So sit back, relax, start up your routers and prepare to join me and prepare yourself for hours upon hours of hands on training.
    Total Runtime: 53 Minutes
    In this video I configure and explain the following:
    -JUNOS Basics
    -How to navigate the different CLI Modes
    -Candidate vs. active configuration
    -Show how to use the commit command
    -Show how to use the rollback command
    -System hostname and system time
    Total Runtime: 42 Minutes
    In this video I configure and explain the following:
    -Basic configuration of physical and loopback interfaces
    -Difference between deactivating and disabling an interface
    -Explain the concept of a unit and family
    -Add a description to an interface
    -Add an IPv4 and an IPv6 address to an interface
    -Perform show commands for verification
    Total Runtime: 32 Minutes
    In this video I configure and explain the following:
    -Configure a point to point link between a Cisco and Juniper router
    -Show how to use the ping command and some of its options
    -Show how to use the monitor command and some of its options
    Total Runtime: 37 Minutes
    In this video I configure and explain the following:
    -Commonly used show commands (Comparing Juniper to Cisco)
    Total Runtime: 8 Minutes
    In this video I explain the following:
    -Welcome to Juniper Series 1!
    -The order in which to view the videos
    -Talk about the Juniper Networks Certification Program (JNCP)
    -Junipers growing presence in the networking industry
    Total Runtime: 33 Minutes
    In this video I configure and explain the following:
    -How to manage and maintain your Juniper device via J-Web
    -How to access your Juniper device via J-Web
    -Perform basic routing protocol administration
    -Perform basic monitoring of interfaces
    -How to navigate the J-Web
    Total Runtime: 46 Minutes
    In this video I configure and explain the following:
    -The basic principles of EBGP and why you would use EBGP
    -External BGP (EBGP)
    -Use show commands to verify proper EBGP operation
    -Advertise networks into EBGP
    Total Runtime: 46 Minutes
    In this video I configure and explain the following:
    -The basic principles of IBGP and why you would use IBGP
    -Internal BGP (IBGP)
    -Use show commands to verify proper IBGP operation
    -BGP Authentication
    -IBGP best practices
    Total Runtime: 27 Minutes
    In this video I configure and explain the following:
    -How to create default routes
    -Use show commands to verify proper default routing operation
    -Explain why and in what situations you would use default routing
    Total Runtime: 46 Minutes
    In this video I configure and explain the following:
    -How to create a basic firewall filter
    -How to use a term within a firewall filter
    -Use proper show commands and test connectivity to verify proper firewall filter implementation
    -Explain the basics of firewall filters and why they are used
    Total Runtime: 35 Minutes
    In this video I configure and explain the following:
    -How to count and log traffic on an interface
    -Use proper show commands and testing to verify that the firewall filter counters and logging is being implemented correctly
    Total Runtime: 27 Minutes
    In this video I configure and explain the following:
    -What is a logical system and why use them?
    -How to use the LT interface option when connecting logical systems
    Total Runtime: 25 Minutes
    In this video I configure and explain the following:
    -How to use the EM interface option when connecting logical systems
    Total Runtime: 30 Minutes
    In this video I configure and explain the following:
    -Single area OSPF
    -Basic principles of the OSPF Routing protocol
    -DR/BDR election process
    -Use show command to verify proper single area OSPF operation
    -How to advertise networks into OSPF
    Total Runtime: 26 Minutes
    In this video I configure and explain the following:
    -Multiple area OSPF
    -Area Border Router (ABR) Operation
    -Use show commands to verify proper multi area OSPF operation
    -How to advertise networks into OSPF
    Total Runtime: 58 Minutes
    In this video I configure and explain the following:
    -The basic principles RIPv2
    -How to manipulate the RIP metric for proper traffic flow
    -Use show commands to verify proper RIPv2 operation
    -How to advertise networks into RIPv2
    Total Runtime: 52 Minutes
    In this video I configure and explain the following:
    -How to setup a basic Routing Policy
    -What a term is and what it is used for
    -Match conditions
    -Action conditions
    -Similarities between Juniper Routing Policies and Cisco Route Maps
    -Import and Export Policies
    Total Runtime: 37 Minutes
    In this video I configure and explain the following:
    -How to create static routes
    -Use show commands to verify proper static routing operation
    -Explain the routing table and route preference
    Total Runtime: 27
    In this video I configure and explain the following:
    -Basic user access and banner configuration
    -How to create and manage user accounts
    -How to create the message and announcement banners
    Total Runtime: 25 Minutes
    In this video I configure and explain the following:
    -Basic traceoption functions
    -How traceoptions are similar to Cisco debugs
    -How to create traceoption files and flags and view the output of traceoption files



    download links

    http://extabit.com/file/27a60cyy9uzrr/Juniper.Series1.part1.rar
    http://extabit.com/file/27a60cyy9v2w7/Juniper.Series1.part2.rar
    http://extabit.com/file/27a60cyy9uzs7/Juniper.Series1.part3.rar
    http://extabit.com/file/27a60cyy9v2tj/Juniper.Series1.part4.rar


    good luck

  2. #2
    عضو
    تاريخ التسجيل
    Oct 2007
    المشاركات
    20
    الدولة: Egypt
    معدل تقييم المستوى
    0

    رد: Bowler CBT Labs - Juniper Series 1


  3. #3
    عضو
    تاريخ التسجيل
    Nov 2007
    المشاركات
    8
    معدل تقييم المستوى
    0

    رد: Bowler CBT Labs - Juniper Series 1

    Thanks but I need Medifire links please

  4. #4
    عضو فضي الصورة الرمزية internetworld
    تاريخ التسجيل
    Jul 2008
    المشاركات
    1,735
    الدولة: Egypt
    معدل تقييم المستوى
    14

    رد: Bowler CBT Labs - Juniper Series 1

    اقتباس المشاركة الأصلية كتبت بواسطة bemo مشاهدة المشاركة
    رابط واحد 857.60 MB يعنى مختلف فالتقسيم عن الروابط السابقه
    هل هو المحتوى بالكامل موجود فى هذا الرابط والفرق هو فى عمليه الضغط ام انه يوجد رابط اخر لاكتمال الملفات ؟؟؟؟؟

  5. #5
    عضو
    تاريخ التسجيل
    Oct 2007
    المشاركات
    20
    الدولة: Egypt
    معدل تقييم المستوى
    0

    رد: Bowler CBT Labs - Juniper Series 1

    اقتباس المشاركة الأصلية كتبت بواسطة internetworld مشاهدة المشاركة
    رابط واحد 857.60 MB يعنى مختلف فالتقسيم عن الروابط السابقه
    هل هو المحتوى بالكامل موجود فى هذا الرابط والفرق هو فى عمليه الضغط ام انه يوجد رابط اخر لاكتمال الملفات ؟؟؟؟؟

    المحتوي بالكامل موجود في هذا الرابط الواحد لا يوجد رابط اخر لاكتمال المفلات .. فقط هو رابط واحد

  6. #6
    عضو برونزي الصورة الرمزية Gawad
    تاريخ التسجيل
    Nov 2009
    المشاركات
    1,933
    معدل تقييم المستوى
    18

    رد: Bowler CBT Labs - Juniper Series 1



    الواد بولار ده صايع، بس بيهيس في اللابات بتاعته، مش محضر وبيشتغل تلقائي، عايز صبر شوية
    [CENTER][SIZE=4][COLOR=Blue]اللهم صلي على محمد وعلى آل محمد كما صليت على آل إبراهيم وبارك على محمد وعلى آل محمد كما باركت على آل إبراهيم في العالمين إنك حميد مجيد[/COLOR][/SIZE]

    [B][SIZE=4]اللهم احفظ مصر آمنة مطمئنة وسائر بلاد المسلمين
    اللهم قنا الفتن ما ظهر منا وما بطن
    [/SIZE][/B]
    [/CENTER]

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •