استفسارات بخصوص tk90

[ama888]

نرجو من الاخوة من لدية الامكانية الاجابة على تلك الاستفسارات ؟
Tk90
Q12 page 660
Why has the network shown in the exhibit failed to converge?
A. The no auto-summary command needs to be applied to the routers
B. The network numbers have not been properly configured on the router s
C. The subnet masks for the network numbers have not been properly con figured
D. The autonomous system number has not been properly configured
E. The bandwidth values have not been properly configured on the serial interfaces

Q71 page 713
Which series of commands will configure router TK1 for LAN-to-LAN
communication with router TK2? The enterprise network address is 192.1.1.0/24
and the routing protocol in use is RIP. (Choose three.)
A. TK1(config)# interface ethernet 0 TK1(config-if)# ip address 192.1.1.129
255.255.255.192 TK1(config-if)# no shutdown
B. TK1(config)# interface ethernet 0 TK1(config-if)# ip address 192.1.1.97
255.255.255.192 TK1(config-if)# no shutdown
C. TK1(config)# interface serial 0 TK1(config-if)# ip address 192.1.1.4 255.255.255.252
TK1(config-if)# clock rate 56000
D. TK1(config)# interface serial 0 TK1(config-if)# ip address 192.1.1.6 255.255.255.252
TK1(config-if)# no shutdown
E. TK1(config)# router rip TK1(config-router)# network 192.1.1.4 TK1(config-router)#
network 192.1.1.128
F. TK1(config)# router rip TK1(config-router)# version 2 TK1(config-router)# network
192.1.1.0
tk answer is : A,D,F
( I think that B also is correct , so what is the difference between A,B?)

q 74 page 716
whaere the graphic ?
Q98 page 734
What is the answer?
QUESTION NO: 102
Which statement about the ip classless router command is true?
A. The ip classless command is enabled by default in recent versions of IOS.
B. The ip classless command should only be enabled when static routing is being used
instead of a routing protocol.
C. The ip classless command should be enabled by the network administrator whenever
RIPv1 or IGRP is being used.
D. The ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.
Answer: A ( I think that D only is correct )

Q106 page 738
Where the graphic ?

[anoir_eq]

Q12-660
If auto-summarization is enabled, the router will automatically
summarize routes at classful network boundary and advertise a single
route for an entire Class A, B, or C network. However, if your lab only
consists of classful networks, but not subnets, you will not see any
difference by turning the feature on or off.


************************************************** ****************

Q71 - 713
بخصوص A & D & F متفق معه مائة بالمائة
B خطا لان 192.1.1.97 ينتمي الى subnet الش

C خطأ لانه وضع clockrate و عندنا TK1 اختير DTE
F صحيح لأن نعمل في (/26 /30 ) classless و ليس classfull


************************************************** *****************

q 74 page 716

متقف معك rule:
100/100

************************************************** ********************

Q98 page 734
وجدت الحل عندي في نسخة VCE

switch to router ===========> straight-through
switch to switch=============> crossover
pc com to switch ===========> rollover

************************************************** *******

QUESTION NO: 102

الجواب الأول هو الصحيح يا أخي

أنت قلت D إذن ما هي التعليمة التي تعلمتها لتفعل ذلك (لا توجد يا اخي جميع هذه اليروتوكولات تعرف ip classless أتوماتيك )

************************************************** ***************

Q106 page 738


شاء الله ان تكون اخر مشاركتي هذه باتفاق كلي معك يا أخي 1000/1000
هناك مثل هاته المشاكل دائما سبحان الذي لا يسهو لكن مثلي من يقوم بالتحميل المجاني لمثل هذه الملفات أن يصبر و يترك للاخوة الذين يشيرون مثل هذه الملفات أن يعترض أرجو أن تكون أيضا معي في الخط
أرجو أن أكون أجبت عن استفساراتك يا أخي و ادع لي بأن ييسر الله لي لاتمكن من الحصول على هذه الشهادة
و السلام عليكم و رحمة الله

[email_usama]

Q12 page 660
Why has the network shown in the exhibit failed to converge?
A. The no auto-summary command needs to be applied to the routers

Q71 page 713
Which series of commands will configure router TK1 for LAN-to-LAN
communication with router TK2? The enterprise network address is 192.1.1.0/24
and the routing protocol in use is RIP. (Choose three.)
a&d&f
و الاجابه c خطأ لان 192.1.1.4 هو network id and not valid ip address
و اختارنا الاجابه a
because the range of network tk2 from 192.1.1.64 to .127 and we cant use it in tk 1 network (as they are in diffrent networks)and so the third range is from .128 to .191 and so 132.1.1.129 will be the first usable ip in this sup net
Q98 page 734
straight
sross
rollover
QUESTION NO: 102
السؤال دا استوقفنى انا كمان هى الاجابتين صح بس ممكن a اقربهم الى الصح عشان البروتوكلات ممكن تشتغل بهذا الامر او لا لكن الثابت انه موجود فى كل ios المعاصره
و ما تشغلش بالك بالرسومات الناقصا
و شد حيلك

[ama888]

اشكركم اخواني الاعزاء على سرعة استجابتكم وردودكم ولكن طبعا الرسومات كما تعرفون ضرورية لمعرفة الاجابة الصحيحة وعموما من يجد هذه الاسئلة التي ليس بها رسومات في اي اختبار آخر وتكون بها الرسومات ان يدلنا عليها وجزاكم الله خيرا وندعوا للجميع بالتوفيق
ولي ايضا بعض الاستفسارات ومعذرة على الاثقال عليكم
Q7 page 95
Plz explain answer

---------------------------
QUESTION NO:6
Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?
A.Rollover cable
B.Console cab le
C.Crossover cable
D.Straight-through cable
E.Serial cable
Answer:C (I think that d correct )


---------------------
QUESTION NO:24
You are a trainee technician at TestKing,Inc.Your instructor tells you to backup
an IOS image of a Cisco device to a Windows 2003 server on the network.
What should you do first?(Choose three.)
A.Make sure that the network server can be accessed.
B.Check that the authentication for access is set.
C.Assure that the network server has adequate space for the code image.
D.Verify any file naming and path requirements.
E.Make sure that the server can load and run the bootstrap code.
Answer:A,C,D ( I think that a,b,c are correct)

-----------
Q31 page 245

Is the following arrangement correct :
Nvram - flash – tftp – rom
and if it is correct … is the content of nvram can be loaded befor loading IOS(which found in flash) ?

---------
Q11 page 277
Tk answer f ( I think that E is correct )