وصلت
Cisco 2600 series Wireless Controller
عن طريق
console cable ولا يعطي قراءة
كيف يمكن ان ادخل الي configure mode ؟؟؟
__________________________________________________ _____________________________________________
وعندي ايضا cisco AIR - CAP2602i-e-k9 , وصلته عن طريق ال cable console وهو يكرر الكود ادناه طول الوقت
*Jun 9 07:25:14.491: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Jun 9 07:25:15.711: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.LTE_ZZ
Not in Bound state.
*Jun 9 07:26:01.211: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Jun 9 07:26:04.435: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Jun 9 07:26:04.539: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.2.145, mask 255.255.255.0, hostname AP7cad.74db.4d59
Translating "CISCO-CAPWAP-CONTROLLER.LTE_ZZ"...domain server (192.168.2.1)
*Jun 9 07:26:12.211: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Jun 9 07:26:13.431: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.LTE_ZZ
ضوابط المشاركة
رد مع اقتباس
المفضلات