جزاك الله خير
موقع البرنامج للاستفاده هو
https://www.ipflow.utc.fr/blog/
https://www.ipflow.utc.fr/index.php/...7200_Simulator
جزاك الله خير
بصراحة يعجز السان عن كلمات الشكر اخى lumark_s فجزاك الله خيرا على هذا المجهود العظيم وجعله الله فى ميزان حسناتك
الرنامج يعمل على مبدأ OPEN SOURCE وقام بعمله طالب بالجامعة الفرنسية.
وللمستخدمين الويندوز الأكس بي :
dynamips -t npe-400 -p 0:C7200-IO-FE:udp:1000
0:127.0.0.1:10001 -p 1A-A1:udp:10002:127.0.0.1:10003 "اسم ملف سيسكو".bin
ويقوم كل جزء من الأوامر لفتح منافذ الراوتر.
وشكرا.
CCNA,CCND,CCNP,,(CCIE WRITTEN),
Release Notes / Documentation for the Dynamips Configuration Generator version 0.2
================================================== ====================
Project Page: https://dyna-gen.sourceforge.net/
Author: Greg Anuzelli
Contact: dynagen@gmail.com
Description
***********
The Dynamips Configuration Generator is a simple tool for use with the amazing Dynamips Cisco 7200 router emulator (https://www.ipflow.utc.fr/index.php/...200_Simulator). It reads in an INI-like configuration file and spits out a bash script with all the configuration options necessary to launch dynamips emulator instances that match your configuration. It takes care of specifying the right port adapters, generating and matching up those pesky netio descriptors, generating the bridge files, etc.
System Requirements
*******************
Requires Python 2.3 or later. Although the tool runs under any OS, it generates a bash script for use with Unix / Linux. The script that is generated requires dynamips version 0.2.4. Earlier version will not work, and newer versions may or may not work.
Installation Notes
******************
The tarball contains the following files:
COPYING The GPL license
Release Notes.txt The release notes you are reading right now
dynagen The executable
kill-dyna.sh A script that shuts down all dynamips instances
mynetwork-sample.cfg A sample annotated network config file
Unpack the tarball, and copy "dynagen" and "kill-dyna.sh" to somewhere in your path (e.g. /usr/local/bin).
To try it out, make a new directory somewhere and copy "mynetwork-sample.cfg" into it. Then compile the sample network with:
dynagen mynetwork-sample.cfg mynetwork.sh
It should create a "mynetwork.sh" script, along with some VLAN files. Execute this script, and telnet to ports 2000, 2001, and 2002 to attach to the consoles of the three routers defined in the sample configuration. You will notice that the script creates a subdirectory for each router instance where the router's working files are stored. To shut down the network, run "kill-dyna.sh".
The sample config file is fairly well commented, so use that as a starting point for your own networks. You only need to rerun dynagen if you make a change to your configuration file. Otherwise just re-use the script file generated to restart your virtual network.
New Features
************
Version 0.2:
- Added Frame Relay switch support
- Now works with Cygwin on Windows
Important Notes
***************
- When you specify serial interfaces, it always "installs" a PA-8T serial adapter, as opposed to than a PA-4T+. I figure why not do the 8 port card, since it's free.
Open Caveats
****************************
- No ATM support at all. Then again, there is no longer ATM on the CCIE lab! I'll add this at some point.
- The configuration file generated is a little ugly and probably non-optimal, but it works.
- Documentation is a little light (i.e. this file and a commented sample configuration).
- Input error checking is spotty at best. I do some checks for what I would consider common typos that could trip you up (for example trying to put a serial adapter in slot 0). But, for example, the tool will gleefully try to create an interface Fa97/297 of type "strawberry jam" if you tell it to. Of course dynamips will then bomb out when you try to run it.
- Security: Again, limited input error checking. So for example, since the script creates a subdirectory with the name you provided for the router instances, if you run against a configuration file that contains a router named something crazy like "/bin/bash" you are probably going to have a bad day.
- Probably lots of other bugs... just look at the version number.
Thanks
******
Thanks to Fabien Devaux, Christophe Fillot, MtvE for creating the dynamips emulator.
Help for Cisco 7200 simulator (dynamips-0.2.4)
==============================================
Authors: Fabien Devaux, Christophe Fillot, MtvE
Emulated hardware
*****************
By default, a NPE-200 is emulated. You can choose the NPE type with the
"-t" option. It is possible to select "npe-100", "npe-150", "npe-175",
"npe-200", "npe-225", "npe-300" and "npe-400". The "npe-g1" is not working.
Please note that you must use the C7200-IO-FE PA driver as IO card if you
want a FastEthernet interface in slot 0. For other slots, you must use
the PA-FE-TX driver.
THANK YOU INDEED MY BROTHER
thank you my brother for this greatefull software "wa gazak allah kol kheer
تربت يداك وجزيت عن كل حرف خطته أناملك بألف ألف حسنة
سيسكو ديزاينر ،،،،، عالم من الحلول
شكراً زوجك الله فى الجنة
البرنامج عجيب بس للاسف خلصت من الروتينك بس عموماً سيكون مفيد لبعض التجارب.
شكراً مره ثانية.
السلام عليكم
إخواني الأحبة
أشكركم على كلماتكم الطيبة
سأقول خلال الأيام القليلة المقبلة برفع ال Configuration Files لهذا البرنامج بحيث تغطي الشهادات التالية:
CCNA
CCNP
CCIE
بإستثناء ال Switching والذي قريباً سيكون متوفر إنشاء الله، وكذلك سيتم قريباً توفير برنامج لل ISDN والخير قادم بعون الله.
بعد عملي المتواصل على هذا البرنامج لمدة 3 أيام متواصلة، فقد إستطعت أن أكون ال Lab الخاص بشهادة CCNA وشهادة CCNP ، ولازلت أقوم بالتجارب المتكررة قبل رفع ال Configuation Files إلى التحميل، وسيكون فيها ملف مساعدة باللغة العربية للمساعدة في فهم البرنامج بشكل أكبر، وسيكون فيها ال Lab الخاص بالتدريب على شهادتي CCNA و CCNP بعون الله.
والسلام عليكم
CCIE Voice # 26926CCIE R&S # loadingاللهم لك الحمد والشكر حتى ترضى ... ولك الحمد والشكر إن رضيت
والله يامان مش عارف الواحد يشكرك ازاي على الحاجات الجامدة دي بس ربنا يكرمك دايما والى الأمام دائما
مشكور جزيلاً...
يعطيك العافية.. البرنامج يعمل وبكفاءة عالية...
بانتظار مزيدك...
السلام عليكم و رحمة الله .
أخي لومارك_س لقد قمت بتحميل Dynamips +ال IOS
و يظهر لدي الجواب التالي :
ويبقى هكذا .
ما الحل يا أستاذ ؟
نورك الله
المشاركة الأصلية كتبت بواسطة tarik li allah
أخي طارق
ممتاز جداً الآن على ال Desktop يوجد مجلد إسمه Dynagen Sample Labs إفتحه ستجد بداخله عدة مجلدات، إفتح المجلد Simple1 وستجد بداخله آيقونه صغيره إسمها Simple1 قم بالضغط عليها مرتين، بعد ذلك قم بفتح برنامج ال Hyper Terminal أو أي برنامج Terminal تستعمله وقم بإدخال البيانات المطلوبة تماماً كما هو موضح بالشرح في المشاركة الأولى، وأهم شئ هو رقم ال Port ولكي تعرف رقم ال Port إفتح نافذة ال Simple1 وإطبع list سيعطيك قائمة بالراوترات المشبوكة وأرقام ال Ports فيها والأول يكون رقمه دائماً 2000 ، فقم بكتابة الرقم 2000 في ال Hyper Terminal Connection ومن ثم مكان ال IP Address ضع إسم جهاز الكومبيوتر الخاص بك، وبعدها إضغط على OK ومن ثم سيتم الدخول لل Router كما لو كان جهاز حقيقي حيث سيبدأ بعمل Exctracting لل IOS وقم بعمل ما تحبه من تطبيقات.
فقط إتبع التعليمات المذكورة في المشاركة الأولى تماماً ولن تواجه أية مشكلة إنشاء الله.
سأقوم قريباً برفع ملف يشرح الخطوات الكاملة لها البرنامج.
والسلام عليكم ورحمة الله وبركاته
CCIE Voice # 26926CCIE R&S # loadingاللهم لك الحمد والشكر حتى ترضى ... ولك الحمد والشكر إن رضيت
بسم الله الرحمن الرحيم
الأخ صاحب الموضوع ، شكرا لك
وبودي أن أنبهك على كلمة كانت في بداية الموضوع وهي مخالفة للدين وربما كانت سهوا
منك ، هداني الله وإياك وهي "لولا الله وفلان" فهي شرك ولكن قل "لولا الله ثم فلان"
أما ما يخص الموضوع ، فاستأذنك بعرض وجهة نظري وهي أن الموجه ما هو إلا pc بدون بعض
الأجهزة الموجودة في ال pc ، لذلك فلا غرابة أن يكون هناك برنامج يجعل من ال pc موجه.
أما ما يتعلق بالمبدلات ، فالمسألة أصعب من الموجه ، بالإضافة للبطء الشديد لأن المسألة
برمجيات وليست عتاد ، فمن المعروف أن المبدل له دارات إلكترونية كثيرة تقوم بعملية التبديل
بين المنافذ الكثيرة في المبدل هذا ما جعل المبدل أغلى سعرا من الموجه قد يكون ثلاثة
أضعاف أو أكثر أغلى في السعر.
وختاما شكرا جزيلا
جميعان
المفضلات