check what is going on at the Dynamips server and show me what it says
does the IOS boots ?
waitting ur responce and dont focus on the dynagen, the errors all happen and u can see them in the dynamips server not the dynagen
Hi there ,
i have a problem with dynamips. i am not getting any response after telnet the router.
fisrt i start the router with " start " command :
after that i telnet the router and get this windows and nothing happend :
thanks for helping me.
check what is going on at the Dynamips server and show me what it says
does the IOS boots ?
waitting ur responce and dont focus on the dynagen, the errors all happen and u can see them in the dynamips server not the dynagen
CCIE Voice # 26926CCIE R&S # loadingاللهم لك الحمد والشكر حتى ترضى ... ولك الحمد والشكر إن رضيت
thanks
i don't know why i get this error when i starting the dynagen
on the dynagen type start R1 then show me the dynamips server output
CCIE Voice # 26926CCIE R&S # loadingاللهم لك الحمد والشكر حتى ترضى ... ولك الحمد والشكر إن رضيت
aha
the server is fine, no problems with it
i think the problem is in the telnet software, try to telnet using any other client like Secure CRT or anything.
if u go to the directory where u installed dynamips, u will find a file called
dynagen.ini
open it, it will look like this:
# ---------------------------------------------------------------------------------
# idledb option
# Specify the file that stores the idle-pc database
# Defaults to the user's home directory
# Usage:
# idledb = /usr/local/etc/dynagenidledb.ini
# ---------------------------------------------------------------------------------
# udp option
# Changes the base UDP NIO port for all labs. Default is 10000
# Usage:
# udp = 11000
# ---------------------------------------------------------------------------------
# telnet option
# Specify the command to execute when using the telnet command from the CLI
# The following substitutions are performed:
# %h = host
# %p = port
# %d = device name
# Uncomment below for Windows
telnet = start telnet %h %p
# Or better yet for Terra Term SSH users:
#telnet = C:\progra~1\TTERMPRO\ttssh.exe %h %p /W=%d /T=1
# For PuTTY users:
#telnet = start C:\progra~1\PuTTY\putty.exe -telnet %h %p
# Uncomment below for Linux
#telnet = xterm -T %d -e telnet %h %p > /dev/null 2>&1 &
# Uncomment and correct the path below for OS X
#telnet = /usr/bin/osascript -e 'tell application "Terminal" to do script with command "telnet %h %p ; exit"' -e 'tell application "Terminal" to tell window 1 to set custom title to "%d"'
make sure the red line is not commented other wise it wont telnet, if its commented with hash or # this means its not active, so make sure its not commented, and try to telnet using other telnet client like Secure CRT or puTTY
let me know
regards
CCIE Voice # 26926CCIE R&S # loadingاللهم لك الحمد والشكر حتى ترضى ... ولك الحمد والشكر إن رضيت
man the ram size u put in ur config file is too big for this image, for the 12.4 code i use only 96 MB of ram, so by using 128 MB of ram ur PC gonna halt and die
thats my 2 cents lol
CCIE Voice # 26926CCIE R&S # loadingاللهم لك الحمد والشكر حتى ترضى ... ولك الحمد والشكر إن رضيت
not working man.
the securecrt not recognized what is R1 or R2
worked after changing the RAM. thanks .
now i have this screenshot .. nothing happens and the CPU is good.
what do u mean its not reconized R1 ??
u need to choose telnet option in secure crt protocol type, then put ur PC name in the hostname field , then choose the port 2001 to connect to R1
thats it
CCIE Voice # 26926CCIE R&S # loadingاللهم لك الحمد والشكر حتى ترضى ... ولك الحمد والشكر إن رضيت
again y need to show me the dynagen screen, is it giving u any errors ?
CCIE Voice # 26926CCIE R&S # loadingاللهم لك الحمد والشكر حتى ترضى ... ولك الحمد والشكر إن رضيت
thanks dude for your help. i did it.
it was a problem in the *.bin file.
المفضلات