طلب من خبراء cisco كيف استرجع password الراوتر

**boguce** · 15-01-2008, 02:46

السلام عليكم و رحمة الله تعالى و بركاته
إخواني الأعزاء لي طلب عندكم
كيف يمكن استرجاع كلمة السر للراوتر cisco
اللي أنا عارف هو يمكن تغير الباسورد دون معرفة الباسورد القديم ولكن كيف؟
و تقبلو فائق الشكر و الاحترام

**boguce** · 16-01-2008, 02:11

where are you? i need your help

**رائد محمد** · 16-01-2008, 10:04

تفضل هذه الخطوات بالتفصيل:-
Recovering Passwords
If you’re locked out of a router because you forgot the password, you can change the configuration
register to help you get back on your feet. As I said earlier, bit 6 in the configuration
register is used to tell the router whether to use the contents of NVRAM to load a
router configuration.
The default configuration register value is 0x2102, meaning that bit 6 is off. With the default setting,
the router will look for and load a router configuration stored in NVRAM (startup-config). To
recover a password, you need to turn on bit 6. Doing this will tell the router to ignore the NVRAM
contents. The configuration register value to turn on bit 6 is 0x2142.
Here are the main steps to password recovery:
1. Boot the router and interrupt the boot sequence by performing a break.
2. Change the configuration register to turn on bit 6 (with the value 0x2142).
3. Reload the router.
4. Enter privileged mode.
5. Copy the startup-config file to running-config.
6. Change the password.
7. Reset the configuration register to the default value.
8. Save the router configuration.
9. Reload the router.