Q6600 overclocking+ 3DMARK06 TEST

[Core2Quad]

عندي 4 قطع DDR2
كل واحده 1 جيجا

[3arab_uae]

I dont know if your ram can overclock but add 0.1v for ddr2 voltage and change FSB=333

[Core2Quad]

فين اضيف ال 0.1v for the DDr2?!
وهل الشغل ده في خطورة؟!

[3arab_uae]

DDR2 overvoltage control= +0.1v
CPU host frequency= 333

[3arab_uae]

You are still in the safe zone no worries as long the temperature is fine

[Core2Quad]

ولكن ما هي علاقة الرام؟!
وفي المره السابقه ليه مغيرناش شي في الرام؟!

[3arab_uae]

because the ram was running at 800mhz
320x2.5=800mhz which is the normal ram speed

But now we are running at 833mhz which is above the rated for your ram so extra voltage is needed for stability
333x2.5= 833mhz

If you are afraid to increase the voltage you can reduce the memory multiplier to 2 and leave the voltage as is but the ram will be running at
333x2= 667mhz which is slower
either way the cpu will be at 3ghz
but 1st one ram is running faster second ram is running slower your choice

[Core2Quad]

انا عملت الخطوة الاولى الي قلتلي عليها
ولكن عند الدخول الى الوندوز , الشاشة بتتطفي , ولكن الكومبيوتر بيضل شغال؟!! , فرجعت على الاعدادات السابقة , بتاعت ال 2.8
وهذه نتائج اختبار ال 3dmark 2006 قبل كسر السرعة وبعد كسر السرعة :






شو رايك :D?!

[3arab_uae]

Its good keep up the good work
This is an indication that you will start playing with the voltages
no more in the safe zone :D

[Core2Quad]

يا نهار اسود :|
يعني اي غطلة ممكن تودي الكومبيوتر ب 100 داهيه!؟
دهملوش اسبوعين عندي يا راجل :D
خلينا في ال safe zone افضل

[3arab_uae]

Na if the settings were wrong just clear the CMOS and your done

My computer is 5 days old :P

[Core2Quad]

ان شاء الله مبروك
ايش هي مواصفات جهازك :D?!

[3arab_uae]

You can see it in the first post

[Core2Quad]

يعني ايه هو اسوأ حاجة ممكن اتوقعها نتيجة التغيير بال voltages??!

[3arab_uae]

Increase in temperature