النتائج 1 إلى 3 من 3

الموضوع: vampire inquires

  1. #1
    عضو
    تاريخ التسجيل
    Oct 2003
    المشاركات
    45
    معدل تقييم المستوى
    0

    vampire inquires



    i have asoltek mother board DDR533 and it slow in copying between tow hard disks "the same hard disks"
    any body can solve this problem ?
    or
    change my mother board!
    and
    if ichange
    change to what??????????????motherboard works in intelsystem p4 ddr system please help me

  2. #2
    اداري سابق الصورة الرمزية أنور
    تاريخ التسجيل
    Jun 2002
    المشاركات
    1,559
    معدل تقييم المستوى
    17
    السلام عليكم

    DMA IS enabled ? if not

    Enabling DMA in Windows 95B/98/98SE/ME

    1. In Windows, click the 'START' button, select 'SETTINGS', click on 'CONTROL PANEL'.
    2. Double click on the 'SYSTEM' icon, click on the 'DEVICE MANAGER tab.
    3. Click on the (+) sign beside 'CD-ROM',
    4. Select the Yamaha recorder and click the Properties button.
    5. Click on the Settings tab, ensure that the DMA box has a checkmark.

    Note: Follow the same procedures for other devices on your system (CD-R/RW, DVD-ROM and CD-ROM, etc.) to ensure that DMA is also enabled where applicable.

    For hard drives: double-click on the 'Disk drives' heading in Device Manager, then double-click on 'Generic IDE Disk Type xx' (the name of this item may be different on your system). DMA is located under the 'Settings' tab.

    Enabling DMA in Windows 2000/XP

    1. In Windows 2000, click the 'START' button, select 'SETTINGS', click on 'CONTROL PANEL', then double-click on the 'SYSTEM' icon.

    In Windows XP, click on the 'START' button, then right-click on 'MY COMPUTER' and select 'PROPERTIES'


    2. Select the 'HARDWARE' tab, click on the 'DEVICE MANAGER' button.
    3. Click on the (+) sign beside 'IDE ATA/ATAPI CONTROLLERS'.
    4. Double Click on the IDE channel (Primary or Secondary) that the Yamaha is connected to, this will bring up its 'PROPERTIES' dialog box. Select the 'ADVANCED SETTINGS' tab.
    5. Set the "Transfer Mode" to 'DMA if available'.
    ('Device 0' is the MASTER and 'Device 1' is the SLAVE on the IDE channel.)
    6. Click OK to accept.

    Windows will prompt you to reboot the computer for the changes to take effect. Please reboot.
    [B]Patience is the best medicine for life[/B]
    أنور بوثنتين

  3. #3
    عضو
    تاريخ التسجيل
    Oct 2003
    المشاركات
    45
    معدل تقييم المستوى
    0


    I WOULD LIKE TO CHANG MY MOTHER BOARD FROM SOLTEK DDR533 TO:
    1- ASUS 800
    2- G.B 800
    3- MSI 800
    WHICH ONE OF THESES MOTHER BOARDS IS BETTER
    ANYBODY HELP ME QUICKLY PLEASE
    Overclocking For Ever

الكلمات الدلالية لهذا الموضوع

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •