ارجوا المساعدة بجهازي
اريد زيادة سرعة جهازي لكنني خايف من خسارته بزيادة حرارته وتلفه لكننيواود منكم مساعدتني ان امكن بدون ان يتلف جهازي ارجوكم
--------[ Processeur ]--------------------------------------------------------------------------------------------------
Propriétés du processeur:
Type de processeur Intel Celeron, 1818 MHz (18 x 101)
Alias du processeur Willamette-128
Stepping du processeur E0
Jeu d'instructions x86, MMX, SSE, SSE2
Vitesse d'horloge originelle 1800 MHz
Engineering Sample Non
Cache de trace de niveau 1 12K Instructions
Cache de données de niveau 1 8 Ko
Cache de niveau 2 128 Ko (On-Die, ECC, ATC, Full-Speed)
Informations physiques:
Forme du composant 478 Pin uPGA
Taille du composant 3.50 cm x 3.50 cm
Transistors 42 million(s)
Technologie utilisée 6M, 0.18 um, CMOS
Taille interne 217 mm2
Voltage au coeur 1.75 V
Voltage d'entrée/sortie 1.75 V
Puissance typique 66.1 W @ 1.80 GHz
Puissance maximale 88 W @ 1.80 GHz
Fabricant du processeur:
Nom de l'entreprise Intel Corporation
Information sur le produit https://www.intel.com/products/processor
Utilisation du processeur:
Processeur nº1 0 %
--------[ CPUID ]-------------------------------------------------------------------------------------------------------
(CPUID) Propriétés:
(CPUID) Fabricant GenuineIntel
(CPUID) Nom du processeur Intel(R) Celeron(R) CPU 1.80GHz
(CPUID) Révision 00000F13h
(IA) Identifiant de la marque 0Ah (Intel Celeron)
Identifiant de la plate-forme 1Fh / MC 04h (Socket 47
(IA) Numéro de série du processeur Inconnu
Révision du Microcode Update 5
Unités HTT / CMP 0 / 0
Jeu d'instructions:
Extensions 64 bits x86 (AMD64, Intel64) Non géré
AMD 3DNow! Non géré
AMD 3DNow! Professional Non géré
AMD 3DNowPrefetch Non géré
AMD Enhanced 3DNow! Non géré
AMD Extended MMX Non géré
AMD MisAligned SSE Non géré
AMD SSE4A Non géré
AMD SSE5 Non géré
Cyrix Extended MMX Non géré
IA-64 Non géré
IA MMX Géré
IA SSE Géré
IA SSE 2 Géré
IA SSE 3 Non géré
IA Supplemental SSE 3 Non géré
IA SSE 4.1 Non géré
IA SSE 4.2 Non géré
VIA Alternate Instruction Set Non géré
Instruction CLFLUSH Géré
Instruction CMPXCHG8B Géré
Instruction CMPXCHG16B Non géré
Instruction Conditional Move Géré
Instruction LZCNT Non géré
Instruction MONITOR / MWAIT Non géré
Instruction POPCNT Non géré
Instruction RDTSCP Non géré
Instruction SYSCALL / SYSRET Non géré
Instruction SYSENTER / SYSEXIT Géré
Instruction VIA FEMMS Non géré
Dispositifs de sécurité:
Advanced Cryptography Engine (ACE) Non géré
Advanced Cryptography Engine 2 (ACE2) Non géré
Prévention de l'exécution des données (DEP, NX, EDB)Non géré
Hardware Random Number Generator (RNG) Non géré
PadLock Hash Engine (PHE) Non géré
PadLock Montgomery Multiplier (PMM) Non géré
Processor Serial Number (PSN) Non géré
Dispositifs de l'économie d'énergie:
Automatic Clock Control Géré
Digital Thermometer Non géré
Dynamic FSB Frequency Switching Non géré
Enhanced Halt State (C1E) Non géré
Enhanced SpeedStep Technology (EIST, ESS) Non géré
Frequency ID Control Non géré
Hardware P-State Control Non géré
LongRun Non géré
LongRun Table Interface Non géré
PowerSaver 1.0 Non géré
PowerSaver 2.0 Non géré
PowerSaver 3.0 Non géré
Processor Duty Cycle Control Géré
Software Thermal Control Non géré
Temperature Sensing Diode Non géré
Thermal Monitor 1 Géré
Thermal Monitor 2 Non géré
Thermal Monitoring Non géré
Thermal Trip Non géré
Voltage ID Control Non géré
(CPUID) Fonctionnalités:
1 GB Page Size Non géré
36-bit Page Size Extension Géré
Address Region Registers (ARR) Non géré
CPL Qualified Debug Store Non géré
Debug Trace Store Géré
Debugging Extension Géré
Direct Cache Access Non géré
Dynamic Acceleration Technology (IDA) Non géré
Fast Save & Restore Géré
Hyper-Threading Technology (HTT) Non géré
Invariant Time Stamp Counter Non géré
L1 Context ID Non géré
Local APIC On Chip Géré
Machine Check Architecture (MCA) Géré
Machine Check Exception (MCE) Géré
Memory Configuration Registers (MCR) Non géré
Memory Type Range Registers (MTRR) Géré
Model Specific Registers (MSR) Géré
Nested Paging Non géré
Page Attribute Table (PAT) Géré
Page Global Extension Géré
Page Size Extension (PSE) Géré
Pending Break Event Non géré
Physical Address Extension (PAE) Géré
Safer Mode Extensions (SMX) Non géré
Secure Virtual Machine Extensions (Pacifica) Non géré
Self-Snoop Géré
Time Stamp Counter (TSC) Géré
Virtual Machine Extensions (Vanderpool) Non géré
Virtual Mode Extension Géré
CPUID Registers (CPU #1):
CPUID 00000000 00000002-756E6547-6C65746E-49656E69
CPUID 00000001 00000F13-0001080A-00000000-3FEBFBFF
CPUID 00000002 665B5001-00000000-00000000-00397040
CPUID 80000000 80000004-00000000-00000000-00000000
CPUID 80000001 00000000-00000000-00000000-00000000
CPUID 80000002 20202020-20202020-20202020-20202020
CPUID 80000003 65746E49-2952286C-6C654320-6E6F7265
CPUID 80000004 20295228-20555043-30382E31-007A4847
MSR Registers:
MSR 00000017 0008-0000-0000-0000
MSR 0000002A 0000-0000-0000-4280
MSR 0000002C 0000-0000-9201-FC00
MSR 0000008B 0000-0005-0000-0000
MSR 0000019A 0000-0000-0000-0000
MSR 0000019B 0000-0000-0000-0000
MSR 0000019C 0000-0000-0000-0000
MSR 000001A0 0000-0000-0000-0089
--------[ Carte mère ]--------------------------------------------------------------------------------------------------
Propriétés de la carte mère:
Identifiant de la carte mère 63-181-0000010-00101111-072407-VIA$P4M89181_P4VM890 BIOS P1.90
Nom de la carte mère ASRock P4VM890
Propriétés du bus principal:
Type du bus Intel GTL+
Largeur du bus 64 bits
Horloge réelle 101 MHz (QDR)
Horloge effective 404 MHz
Bande passante 3232 Mo/s
Propriétés du bus mémoire:
Type du bus DDR SDRAM
Largeur du bus 64 bits
Ratio DRAM:FSB 1:1
Horloge réelle 101 MHz (DDR)
Horloge effective 202 MHz
Bande passante 1616 Mo/s
Propriétés du bus chipset:
Type du bus VIA V-Link
Largeur du bus 8 bits
Horloge réelle 67 MHz (QDR)
Horloge effective 269 MHz
Bande passante 269 Mo/s
Informations physiques sur la carte mère:
Sockets/slots processeur 1 Socket 478
Slots d'expansion 3 PCI, 1 PCI-E x16, 1 AMR
Slots RAM 2 DDR DIMM
Périphériques intégrés Audio, Video, LAN
Forme Micro ATX
Taille de la carte mère 200 mm x 240 mm
Chipset de la carte mère P4M890
Autres fonctionnalités Hybrid Booster
Fabricant de la carte mère:
Nom de l'entreprise ASRock Inc.
Information sur le produit https://www.asrock.com/mb/index.asp?s=n
Télécharger le BIOS https://www.asrock.com/support/Download.asp
--------[ SPD ]---------------------------------------------------------------------------------------------------------
[ DIMM2: ProMos/Mosel Vitelic V826632K24SATG-C0 ]
Propriétés du module mémoire:
Nom du module ProMos/Mosel Vitelic V826632K24SATG-C0
Numéro de série C000010Bh (184615104)
Date de fabrication Semaine 41 / 2003
Taille du module 256 Mo (1 rank, 4 banks)
Type du module Unbuffered
Type de mémoire DDR SDRAM
Vitesse de mémoire PC2700 (166 MHz)
Largeur du module 64 bit
Voltage du module SSTL 2.5
Méthode de détection d'erreurs Aucun(e)
Taux de rafraîchissement Réduit (7.8 us), Self-Refresh
Performances mémoire:
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS) / 10-12-2 (RC-RFC-RRD)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS) / 8-10-2 (RC-RFC-RRD)
Fonctionnalités du module mémoire:
Early RAS# Precharge Non géré
Auto-Precharge Non géré
Precharge All Non géré
Write1/Read Burst Non géré
Buffered Address/Control Inputs Non géré
Registered Address/Control Inputs Non géré
On-Card PLL (Clock) Non géré
Buffered DQMB Inputs Non géré
Registered DQMB Inputs Non géré
Differential Clock Input Géré
Redundant Row Address Non géré
[ DIMM4: Samsung M3 68L6423HUN-CCC ]
Propriétés du module mémoire:
Nom du module Samsung M3 68L6423HUN-CCC
Numéro de série 030A1C50h (1344014851)
Date de fabrication Semaine 7 / 2007
Taille du module 512 Mo (2 ranks, 4 banks)
Type du module Unbuffered
Type de mémoire DDR SDRAM
Vitesse de mémoire PC3200 (200 MHz)
Largeur du module 64 bit
Voltage du module SSTL 2.5
Méthode de détection d'erreurs Aucun(e)
Taux de rafraîchissement Réduit (7.8 us), Self-Refresh
Performances mémoire:
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS) / 11-14-2 (RC-RFC-RRD)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS) / 10-12-2 (RC-RFC-RRD)
Fonctionnalités du module mémoire:
Early RAS# Precharge Non géré
Auto-Precharge Non géré
Precharge All Non géré
Write1/Read Burst Non géré
Buffered Address/Control Inputs Non géré
Registered Address/Control Inputs Non géré
On-Card PLL (Clock) Non géré
Buffered DQMB Inputs Non géré
Registered DQMB Inputs Non géré
Differential Clock Input Géré
Redundant Row Address Non géré
Fabricant du module mémoire:
Nom de l'entreprise Samsung
Information sur le produit https://www.samsung.com/Products/Sem...DRAM/index.htm
--------[ Chipset ]-----------------------------------------------------------------------------------------------------
[ North Bridge: VIA P4M890 ]
Propriétés du chipset North Bridge:
North Bridge VIA P4M890
Vitesses FSB supportées FSB400, FSB533, FSB800, FSB1066
Types de mémoire gérés DDR-266 SDRAM, DDR-333 SDRAM, DDR-400 SDRAM, DDR2-400 SDRAM, DDR2-533 SDRAM
Quantité maximum de mémoire 4 Go
Révision 00
Forme du composant 952 Pin HSBGA
Taille du composant 3.75 cm x 3.75 cm
In-Order Queue Depth 8
Contrôleur mémoire:
Bank Interleave 4-way
Performances mémoire:
CAS Latency (CL) 2.5T
RAS To CAS Delay (tRCD) 2T
RAS Precharge (tRP) 2T
RAS Active Time (tRAS) 5T
Row Refresh Cycle Time (tRFC) 8T
Command Rate (CR) 2T
RAS To RAS Delay (tRRD) 2T
Write Recovery Time (tWR) 3T
Write To Read Delay (tWTR) 2T
Read To Precharge Delay (tRTP) 3T
Refresh Period (tREF) 800T
Correction d'erreurs:
ECC Non géré
ChipKill ECC Non géré
RAID Non géré
ECC Scrubbing Non géré
Slots mémoire:
Slot DRAM nº1 256 Mo (DDR SDRAM)
Slot DRAM nº2 512 Mo (DDR SDRAM)
Contrôleur graphique intégré:
Type du contrôleur graphique VIA/S3G UniChrome Pro
État du contrôleur graphique Désactivé(e)
Contrôleur AGP:
Version AGP 3.05
État AGP Désactivé(e)
Taille de la fenêtre AGP 128 Mo
Vitesses AGP gérées par ce système 1x, 2x, 4x, 8x
Fast-Write Géré, Désactivé(e)
Side Band Addressing Géré, Désactivé(e)
Contrôleur PCI Express:
PCI-E 1.0 x16 port #0 Utilisé @ x16 (nVIDIA GeForce 7300 SE/7200 GS Video Adapter)
Fabricant du chipset:
Nom de l'entreprise VIA Technologies, Inc.
Information sur le produit https://www.via.com.tw/en/products/chipsets
Télécharger le pilote https://www.viaarena.com/?PageID=2
Mise à jour de pilotes https://driveragent.com?ref=59
[ South Bridge: VIA VT8237R+ ]
Propriétés du chipset South Bridge:
South Bridge VIA VT8237R+
Révision 00
Forme du composant 539 Pin BGA
Taille du composant 2.7 cm x 2.7 cm
Technologie utilisée 0.22 um
Voltage au coeur 2.5 V
Contrôleur audio AC'97:
Type du contrôleur audio VIA 8233/8235/8237/8251
Nom du codec Realtek ALC655
Identifiant du codec 414C4761h
Sortie S/PDIF Géré
Fabricant du chipset:
Nom de l'entreprise VIA Technologies, Inc.
Information sur le produit https://www.via.com.tw/en/products/chipsets
Télécharger le pilote https://www.viaarena.com/?PageID=2
Mise à jour de pilotes https://driveragent.com?ref=59
--------[ BIOS ]--------------------------------------------------------------------------------------------------------
Propriétés du BIOS:
Type de BIOS AMI
Version du BIOS P1.90
Date du BIOS système 07/24/07
Date du BIOS vidéo 06/03/07
Fabricant du BIOS:
Nom de l'entreprise American Megatrends Inc.
Information sur le produit https://www.ami.com/amibios
Mises à jour du BIOS https://www.esupport.com/biosagent/i...m?refererid=40
--------[ ACPI ]--------------------------------------------------------------------------------------------------------
[ APIC: Multiple APIC Description Table ]
Table de propriétés ACPI:
Signature ACPI APIC
Description de la table Multiple APIC Description Table
Adresse mémoire 2FFB0390h
Longueur de la table 104 octets
OEM ID A M I
OEM Table ID OEMAPIC
Creator ID MSFT
[ DSDT: Differentiated System Description Table ]
Table de propriétés ACPI:
Signature ACPI DSDT
Description de la table Differentiated System Description Table
Adresse mémoire 2FFB0440h
Longueur de la table 16175 octets
OEM ID P4M89
OEM Table ID P4M89181
Creator ID INTL
[ FACP: Fixed ACPI Description Table ]
Table de propriétés ACPI:
Signature ACPI FACP
Description de la table Fixed ACPI Description Table
Adresse mémoire 2FFB0200h
Longueur de la table 132 octets
OEM ID A M I
OEM Table ID OEMFACP
Creator ID MSFT
PM Timer 00000808h
[ FACS: Firmware ACPI Control Structure ]
Table de propriétés ACPI:
Signature ACPI FACS
Description de la table Firmware ACPI Control Structure
Adresse mémoire 2FFC0000h
Longueur de la table 64 octets
[ MCFG: Memory Mapped Configuration Space Base Address Description Table ]
Table de propriétés ACPI:
Signature ACPI MCFG
Description de la table Memory Mapped Configuration Space Base Address Description Table
Adresse mémoire 2FFB0400h
Longueur de la table 60 octets
OEM ID A M I
OEM Table ID OEMMCFG
Creator ID MSFT
[ OEMB: OEM Specific Information Table ]
Table de propriétés ACPI:
Signature ACPI OEMB
Description de la table OEM Specific Information Table
Adresse mémoire 2FFC0040h
Longueur de la table 70 octets
OEM ID A M I
OEM Table ID AMI_OEM
Creator ID MSFT
[ RSD PTR: Root System Description Pointer ]
Table de propriétés ACPI:
Signature ACPI RSD PTR
Description de la table Root System Description Pointer
Adresse mémoire 000F84A0h
Longueur de la table 36 octets
OEM ID ACPIAM
[ RSDT: Root System Description Table ]
Table de propriétés ACPI:
Signature ACPI RSDT
Description de la table Root System Description Table
Adresse mémoire 2FFB0000h
Longueur de la table 52 octets
OEM ID A M I
OEM Table ID OEMRSDT
Creator ID MSFT
السلام عليكم ورحمة الله :
أما بعد :
معالجك سيليرون وأعتقد أنه لن تلاحظ فرق الأداء كثيراً مع كسر السرعة على العموم لو مصمم على كسر السرعة فحبذا لو تحمّل برنامج CPU-Z وتصوّر تبويب CPU و Memory و SPD وتضع صوراً لها هنا وكذلك درجات الحرارة لدى جهازك إن أمكن .
私は オゼマ です
على العموم حاول تقليل تردد الذاكرة من 166 إلى 100 ميغاهيرتز ستجده بإسم : Ram Frequency أو أي اسم يدل عليه .. وبعد ذلك ستحتاج فقط إلى رفع تردد المعالج بشكل عادي وبقيم تدريجية .
私は オゼマ です
لا يمكنني تعديلها فهي اما أوطواماتيك أو من 133/166 ألى 166/200
طيب إجعلها إلى 133 .. وشوف كم تردد الذاكرة لما تشغل الويندوز .
私は オゼマ です
انا مشغلها أوماتيك فبيعمل لي 133/166
أنت تقصد الرام أليس كدالك لأن الرام هو الدي لا أستطيع أن أغيره لكن توجد كومبيوتر فريكونسي وأنا عامل على اوطواماتيك اي 100 ميكاهيرتز واستطيع تغييره فما رايك
أما تردد الدي سألتني عنه فهو 168.4ميكاهيرتز
أو هنا https://file5.9q9q.net/Download/75926554/-----.exe.html
في هدا الملف توجد معلومات الضرورية وانا عامل 133/166
غربية مع أني لم أجد أي تغيير فيما عملته .
تردد معامل النقل الأمامي لا تغيره حتى تقوم بجعل تردد الذاكرة 133 فقط وليس 166 .
私は オゼマ です
انه هكدا أصلا ف 133/166 ليستا منفصلتين وقد شاهدت في البيوس أنه 333 فما معناها وقد كانت بالقرب من كمية الرام متلا 256MB/166MHz (DDR333) لا توجد 133 رغم أنها في 133/166 وهد الأخيرة غيرة منفصلة تأتي هكدا اما تختار 133/166 أو 166/200 وهي الأن في وضعية 133/160
ربما لا أشرح جيدا أعتدر لقلة معرفتي فأنا ما زلت مبتدأ
هناك خطأ وهدا هو التصحيح
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [166MHz (DDR 333)] and [200MHz
(DDR 400)].
هده معلومات لربما ستساعد وهي مقتبسة من البيوس نفسه
3.33.3 Advanced ScreenAdvanced Screen
3.3 Advanced Screen
3.33.3 Advanced ScreenAdvanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP
Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.
CPU Host Frequency
While entering setup, BIOS auto detects the present CPU host frequency of
this motherboard. The actual CPU host frequency will show in the following
item.
Spread Spectrum
The default value of this option is [Auto].
PCIE/PCI operatin mode
Use this to select PCIE/PCI operation mode. The default value is [Async.
mode]. Configuration options: [Async. mode] and [Sync. mode].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Ratio Status
This is a read-only item, which displays whether the ratio status of this
motherboard is “Locked” or “Unlocked”. If it shows “Unlocked”, you will
find an item Ratio CMOS Setting appears to allow you changing the ratio
value of this motherboard. If it shows “Locked”, then the item Ratio CMOS
Setting will be hidden. If you use the ratio value to time the CPU frequency,
it will be equal to the core speed of the installed processor.
Ratio Actual Value
This is a read-only item, which displays the ratio actual value of this
motherboard.
Max CPUID Value Limit
For Prescott CPU only, some OSes (ex. NT4.0) cannot handle the function
with disable. This should be enabled in order to boot legacy OSes that
cannot support CPUs with extended CPUID functions.
CPU Thermal Throttling
You may select [Enabled] to enable P4 CPU internal thermal control
mechanism to keep the CPU from overheated.
Hyper Threading Technology
®
To enable this feature, it requires a computer system with an Intel Pentium
4 processor that supports Hyper-Threading technology and an operating
®
system that includes optimization for this technology, such as Microsoft
® ® ®
Windows XP. Set to [Enabled] if using Microsoft Windows XP, or Linux
kernel version 2.4.18 or higher. This option will be hidden if the installed
CPU does not support Hyper-Threading technology.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [166MHz (DDR 333)] and [200MHz
(DDR 400)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
DRAM CAS# Latency
Use this item to adjust the means of memory accessing. Configuration
options: [Auto], [2], [2.5], and [3].
DRAM Bank Interleave
Use this option to select DRAM Bank Interleave. Configuration options:
[Auto], [Disabled], [2-Way], [4-Way], and [8-Way]. The default value is set
to [Auto] to set the timing by dram SPD.
Precharge to Active (Trp)
Use this option to select Precharge to Active (Trp). Configuration options:
[Auto], [2T], [3T], [4T], and [5T]. The default value is set to [Auto] to set the
timing by dram SPD.
Active to Precharge (Tras)
Use this option to select Active to Precharge (Tras). Configuration options:
[Auto], [5T] to [20]. The default value is set to [Auto] to set the timing by dram
SPD.
Active to CMD (Trcd)
Use this option to select Active to CMD (Trcd). Configuration options: [Auto],
[2T], [3T], [4T], and [5T]. The default value is set to [Auto] to set the timing by
dram SPD.
REF to ACT / REF to REF (Trfc)
Use this option to select REF to ACT / REF to REF (Trfc). Configuration
options: [Auto], [8T] to [71T]. The default value is set to [Auto] to set the
timing by dram SPD.
ACT(0) to ACT (1) (Trrd)
Use this option to select ACT(0) to ACT (1) (Trrd). Configuration options:
[Auto], [2T], [3T], [4T], and [5T]. The default value is set to [Auto] to set the
timing by dram SPD.
Read to Precharge (Trtp)
Use this option to select Read to Precharge (Trtp). Configuration options:
[Auto], [2T], [3T]. The default value is set to [Auto] to set the timing by dram
SPD.
Write to Read CMD (Twtr)
Use this option to select Write to Read CMD (Twtr). Configuration options:
[Auto], [1T], [2T]. The default value is set to [Auto] to set the timing by dram
SPD.
Write Recovery Time (Twr)
Use this option to select Write Recovery Time (Twr). Configuration options:
[Auto], [2T], [3T], [4T], and [5T]. The default value is set to [Auto] to set the
timing by dram SPD.
DRAM Command Rate
Use this to select among [2T Command] and [1T Command] for DRAM
Command Rate. The default value is [2T Command].
DRAM Voltage
Use this to select DRAM voltage. Configuration options: [Auto], [Normal]
and [High]. The default value is [Auto].
VDDQ Voltage
Use this to select VDDQ voltage. Configuration options: [Auto], [Normal]
and [High]. The default value is [Auto].
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video
card. It allows you to select the type of Primary VGA in case of multiple
video controllers. The default value of this feature is [PCI]. Configuration
options: [Onboard], [PCI] and [PCI Express].
Share Memory
This allows you to set share memory feature. The default value is [Auto].
Configuration options: [Auto], [32MB] and [64MB].
V-Link Speed
This allows you to set the North Bridge and South Bridge V-Link Speed of
VIA chipset. configuration options: [Normal], [Fast]. The default value is
[Normal].
PCI Delay Transaction
Enable PCI Delay Transaction to allow other PCI masters to use the PCI BUS
while the transaction is being carried out on the target device. Disable this
feature when using PCI cards that are not PCI 2.1 compliant.
IDE Drive Strength
This allows you to set the drive strength of the onboard IDE controller.
Configuration options: [Normal], [Low], [Lowest] and [Highest]. The default
value is [Normal].
OnBoard LAN
This allows you to enable or disable the onboard LAN feature.
OnBoard AC’97 Audio
Select [Auto] or [Disabled] for the onboard AC’97 Audio feature.
OnBoard MC’97 Modem
Select [Auto] or [Disabled] for the onboard MC’97 Modem feature.
Suspend to RAM
This field allows you to select whether to auto-detect or disable the Sus
pend-to-RAM feature. Select [Auto] will enable this feature if the system
supports it.
Restore on AC/Power Loss
This allows you to set the power state after an unexpected AC/
Power loss. If [Power Off] is selected, the AC/Power remains off
when the power recovers. If [Power On] is selected, the AC/Power
resumes and the system starts to boot up when the power recovers.
Ring-In Power On
Use this item to enable or disable Ring-In signals to turn on the system from
the power-soft-off mode.
PCI Devices Power On
Use this item to enable or disable PCI devices to turn on the system from the
power-soft-off mode.
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from
the power-soft-off mode.
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the
system.
OnBoard IDE Controller
Use this item to enable or disable onboard IDE controller. Configuration
options: [Enabled] and [Disabled].
SATA Operation Mode
Use this item to adjust SATA Operation Mode. Please set this item to [RAID]
®
if you want to install Windows 98 / ME on SATA HDDs, or you want to
®
operate RAID functions with Windows 2000 / XP. Otherwise, please set
this item to [non-RAID].
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the “Primary IDE Master” as the example in the following instruction,
which can be applied to the configurations of “Primary IDE Slave”, “Sec-
ondary IDE Master”, and “Secondary IDE Slave” as well.
TYPE
Use this item to configure the type of the IDE device that you specify.
Configuration options: [Not Installed], [Auto], [CD/DVD], and [ARMD].
[Not Installed]: Select [Not Installed] to disable the use of IDE device.
[Auto]: Select [Auto] to automatically detect the hard disk drive.
After selecting the hard disk information into BIOS, use a disk
utility, such as FDISK, to partition and format the new IDE hard
disk drives. This is necessary so that you can write or read
data from the hard disk. Make sure to set the partition of the
Primary IDE hard disk drives to active.
[CD/DVD]: This is used for IDE CD/DVD drives.
[ARMD]: This is used for IDE ARMD (ATAPI Removable Media Device),
such as MO.
LBA/Large Mode
Use this item to select the LBA/Large mode for a hard disk > 512 MB under
DOS and Windows; for Netware and UNIX user, select [Disabled] to
disable the LBA/Large mode.
Block (Multi-Sector Transfer)
The default value of this item is [Auto]. If this feature is enabled, it will
enhance hard disk performance by reading or writing more data during
each transfer.
PIO Mode
Use this item to set the PIO mode to enhance hard disk performance by
optimizing the hard disk timing.
DMA Mode
DMA capability allows the improved transfer-speed and data-integrity for
compatible IDE devices.
S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology) feature. Configuration options: [Disabled], [Auto],
[Enabled].
32-Bit Data Transfer
Use this item to enable 32-bit access to maximize the IDE hard disk data
transfer rate.
PCI Latency Timer
The default value is 32. It is recommended to keep the default value unless
the installed PCI expansion cards’ specifications require other settings.
PCI IDE BusMaster
Use this item to enable or disable the PCI IDE BusMaster feature.
3.3.63.3.6 Floppy ConfigurationFloppy Configuration
3.3.6 Floppy Configuration
3.3.63.3.6 Floppy ConfigurationFloppy Configuration
In this section, you may configure the type of your floppy drive.
OnBoard Floppy Controller
Use this item to enable or disable floppy drive controller.
Serial Port Address
Use this item to set the address for the onboard serial port or disable it.
Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],
[2E8 / IRQ3].
Infrared Port Address
Use this item to set the address for the onboard infrared port or disable it.
Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3].
Parallel Port Address
Use this item to set the address for the onboard parallel port or disable it.
Configuration options: [Disabled], [378], and [278].
Parallel Port Mode
Use this item to set the operation mode of the parallel port. The default
value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP
version in the following item, “EPP Version”. Configuration options:
[Normal], [Bi-Directional], and [ECP+EPP].
EPP Version
Use this item to set the EPP version. Configuration options: [1.9]
and [1.7].
ECP Mode DMA Channel
Use this item to set the ECP mode DMA channel. Configuration
options: [DMA0], [DMA1], and [DMA3].
Parallel Port IRQ
Use this item to set the IRQ for the parallel port. Configuration options:
[IRQ5] and [IRQ7].
USB Controller
Use this item to enable or disable the use of USB controller.
USB 2.0 Support
Use this item to enable or disable the USB 2.0 support.
Legacy USB Support
Use this item to enable or disable the support to emulate legacy I/O
devices such as mouse, keyboard,... etc. Or you may select [Auto] so
that the system will start to auto-detect; if there is no USB device
connected, “Auto” option will disable the legacy USB support.
3.43.4 Hardware Health Event Monitoring ScreenHardware Health Event Monitoring Screen
3.4 Hardware Health Event Monitoring Screen
3.43.4 Hardware Health Event Monitoring ScreenHardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU fan
speed, chassis fan speed, and the critical voltage.
3.53.5 Boot ScreenBoot Screen
3.5 Boot Screen
3.53.5 Boot ScreenBoot Screen
In this section, it will display the available devices on your system for you to config-
ure the boot settings and the boot priority.
Boot From Network
Use this item to enable or disable the Boot From Network feature.
VIA SATA Raid Utility
®
Use this to enable or disable VIA VT8237R Plus SATA Raid BIOS Utility
during POST.
Boot Up Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock
function after boot-up.
3.63.6 Security ScreenSecurity Screen
3.6 Security Screen
3.63.6 Security ScreenSecurity Screen
In this section, you may set or change the supervisor/user password for the system.
For the user password, you may also clear it.
Save Changes and Exit
When you select this option, it will pop-out the following message, “Save
configuration changes and exit setup?” Select [OK] to save the changes
and exit the BIOS SETUP UTILITY.
Discard Changes and Exit
When you select this option, it will pop-out the following message, “Dis-
card changes and exit setup?” Select [OK] to exit the BIOS SETUP UTILITY
without saving any changes.
Discard Changes
When you select this option, it will pop-out the following message, “Dis-
card changes?” Select [OK] to discard all changes.
Load Optimal Defaults
When you select this option, it will pop-out the following message, “Load
optimal defaults?” Select [OK] to load the default values for all the setup
configurations.
ما معنى كل هدا كيف أحمل البيوس ان كان هناك الكتير منها من نفس نوع لكن متغيرة من حيت الاستخدام
فمادا أختار أو بمعنى أخر ما وضيفة كل واحدة منها
رابط الصورة
https://file5.9q9q.net/Download/5823...7----.bmp.html
لايمكنك كسر السرعة فالمكونات ضعيفة وخاصة المعالج
شكرا جزيلا لكم على المساعدة وأنا على اطلاع دائم
ضوابط المشاركة
المفضلات