السلام عليكم ورحمة الله و بركاته
اللي عايز يكون ضامن انه فاهم كل شيء في السي سي ان ايه يكون عارف كل الحاجات ديه
و طبعا مش انا اللي بقول الكلام ده . ده موقع سيسكو هوة اللي بيقول . و اللي عارف كل ده مش بس هيخليه يعدي الامتحان لا انا اضمنلو انو يكون بروفيشنال في السي سي ان ايه و ممكن يكون انستراكتور فيها كمان هههههههه . مش المهم يا اخي انك تحفظ اسألة الباس فور شور و تدخل و خلاص . علشان كدة انته بتكون ضحكت على نفسك و اشتريت ورقة مش هتعرف تستفيد فيها بأي حاجة خالص . المهم انك تكون فاهم الكورس ده كويس . و مش بس كويس كويس جدا كمان
و هيه ديه الحاجات اللي تأهلك احتراف المنهج


***Describe how a network works


* Describe the purpose and functions of various network devices
* Select the components required to meet a network specification
* Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
* Describe common networked applications including web applications
* Describe the purpose and basic operation of the protocols in the OSI and TCP models
* Describe the impact of applications (Voice Over IP and Video Over IP) on a network
* Interpret network diagrams
* Determine the path between two hosts across a network
* Describe the components required for network and Internet communications
* Identify and correct common network problems at layers 1, 2, 3 and 7 using a layered model approach
* Differentiate between LAN/WAN operation and features


Configure, verify and troubleshoot a switch with VLANs and interswitch communications



* Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts
* Explain the technology and media access control method for Ethernet networks
* Explain network segmentation and basic traffic management concepts
* Explain basic switching concepts and the operation of Cisco switches
* Perform and verify initial switch configuration tasks including remote access management
* Verify network status and switch operation using basic utilities (including: ping, traceroute, telnet, SSH, arp, ipconfig), SHOW & DEBUG commands
* Identify, prescribe, and resolve common switched network media issues, configuration issues, auto negotiation, and switch hardware failures
* Describe enhanced switching technologies (including: VTP, RSTP, VLAN, PVSTP, 802.1q)
* Describe how VLANs create logically separate networks and the need for routing between them
* Configure, verify, and troubleshoot VLANs
* Configure, verify, and troubleshoot trunking on Cisco switches
* Configure, verify, and troubleshoot interVLAN routing
* Configure, verify, and troubleshoot VTP
* Configure, verify, and troubleshoot RSTP operation
* Interpret the output of various show and debug commands to verify the operational status of a Cisco switched network.
* Implement basic switch security (including: port security, trunk access, management vlan other than vlan1, etc.)


Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network.


* Describe the operation and benefits of using private and public IP addressing
* Explain the operation and benefits of using DHCP and DNS
* Configure, verify and troubleshoot DHCP and DNS operation on a router.(including: CLI/SDM)
* Implement static and dynamic addressing services for hosts in a LAN environment
* Calculate and apply an addressing scheme including VLSM IP addressing design to a network
* Determine the appropriate classless addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment
* Describe the technological requirements for running IPv6 in conjunction with IPv4 (including: protocols, dual stack, tunneling, etc).
* Describe IPv6 addresses
* Identify and correct common problems associated with IP addressing and host configurations



Configure, verify, and troubleshoot basic router operation and routing on Cisco devices



* Describe basic routing concepts (including: packet forwarding, router lookup process)
* Describe the operation of Cisco routers (including: router bootup process, POST, router components)
* Select the appropriate media, cables, ports, and connectors to connect routers to other network devices and hosts
* Configure, verify, and troubleshoot RIPv2
* Access and utilize the router to set basic parameters.(including: CLI/SDM)
* Connect, configure, and verify operation status of a device interface
* Verify device configuration and network connectivity using ping, traceroute, telnet, SSH or other utilities
* Perform and verify routing configuration tasks for a static or default route given specific routing requirements
* Manage IOS configuration files. (including: save, edit, upgrade, restore)
* Manage Cisco IOS.
* Compare and contrast methods of routing and routing protocols
* Configure, verify, and troubleshoot OSPF
* Configure, verify, and troubleshoot EIGRP
* Verify network connectivity (including: using ping, traceroute, and telnet or SSH)
* Troubleshoot routing issues
* Verify router hardware and software operation using SHOW & DEBUG commands.
* Implement basic router security



Explain and select the appropriate administrative tasks required for a WLAN



* Describe standards associated with wireless media (including: IEEE WI-FI Alliance, ITU/FCC)
* Identify and describe the purpose of the components in a small wireless network. (Including: SSID, BSS, ESS)
* Identify the basic parameters to configure on a wireless network to ensure that devices connect to the correct access point
* Compare and contrast wireless security features and capabilities of WPA security (including: open, WEP, WPA-1/2)
* Identify common issues with implementing wireless networks. (Including: Interface, missconfiguration)


Identify security threats to a network and describe general methods to mitigate those
threats


* Describe today's increasing network security threats and explain the need to implement a comprehensive security policy to mitigate the threats
* Explain general methods to mitigate common security threats to network devices, hosts, and applications
* Describe the functions of common security appliances and applications
* Describe security recommended practices including initial steps to secure network devices



Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network.



* Describe the purpose and types of ACLs
* Configure and apply ACLs based on network filtering requirements.(including: CLI/SDM)
* Configure and apply an ACLs to limit telnet and SSH access to the router using (including: SDM/CLI)
* Verify and monitor ACLs in a network environment
* Troubleshoot ACL issues
* Explain the basic operation of NAT
* Configure NAT for given network requirements using (including: CLI/SDM)
* Troubleshoot NAT issues



Implement and verify WAN links



* Describe different methods for connecting to a WAN
* Configure and verify a basic WAN serial connection
* Configure and verify Frame Relay on Cisco routers
* Troubleshoot WAN implementation issues
* Describe VPN technology (including: importance, benefits, role, impact, components)
* Configure and verify a PPP connection between Cisco routers



اتمنى انكم تكونو فاهمين و لا تنسوني بدعوة صالحة لي و لذريتي و للمسلمين جميعا