وعليكم السلام ورحمة الله وبركاته
أخي الكريم أنا بأحضر ل CVoice exam وسأحاول أن أشرح على قدر فهمي
Show voice port summary
على قول جيريمي من CBT nuggets , يعتبر هذا الأمر مشابه ل sh ip int brief حيث يعطيك معلومات عن نوع وحالة منافذ الصوت (مثال إذا سماعة الهاتف مرفوعة, يعطيك off-hook) الهواتف يتم وصلها ل FXS ports
Pots dial-peers تستخدم للمكالمات التي تتم من خلال PSTN
voip dial-peers تستخدم للمكالمات التي تتم من خلال WAN
1750_Voice(config)#dial-peer voice 3301 pots
عرفنا pots dial-peer وأعطيناها رقم 3301 ( بفضل أن يكون رقم Dial-peer مشابه لرقم التحويله حتى يسهل تذكره)
1750_Voice(config-dial-peer)#destination-pattern 3301
1750_Voice(config-dial-peer)#port 2/0
أي مكالمه ل 3301 سوف تذهب من خلال port 2/0
---------------------------------
1750_Voice(config)#dial-peer voice 44 voip
هنا عرفنا Voip dial-peer
1750_Voice(config-dial-peer)#destination-pattern 44..
1750_Voice(config-dial-peer)#session target ipv4:10.1.1.2
أي مكالمة من 4 أرقام وتبدأ ب 44 سوف تذهب ل 10.1.1.2
------------------------------
2600_Voice(config)#dial-peer voice tag
2600_Voice(config)#dial-peer voice 4401 pots
2600_Voice(config-dial-peer)#destination-pattern 4401
2600_Voice(config-dial-peer)#port 1/1/0
2600_Voice(config)#dial-peer voice 4410 pots
2600_Voice(config-dial-peer)#destination-pattern 4410
2600_Voice(config-dial-peer)#port 1/1/0
أي مكالمة ل 4410 و 4401 سوف تذهب ل port 1/1/0
----------------------------------
2600_Voice(config-dial-peer)#destination-pattern 911
2600_Voice(config-dial-peer)#port 0/2/0
2600_Voice(config-dial-peer)#foward-digits all
إذا كان forward-digits 2 معناه أنه يستخدم رقمبن من اليمين (911 تصبح 11)
هنا يستخدم كل الرقم 911
-------------------------------------
preference 0
عندك من 0 – 10 ( 0 له الأفضلية) نعطي أفضلية ل Voip dial-peer على pots dial-peer لأن Voip ببلاش
--------------------------
إذا WAN link down الراوتر ما حيحول ل PSTN إلا بعد 15 ثانية لذلك حنعرف voice class ونغير الوقت لثانيتين
2600_Voice(config)#voice-class h323 10
2600_Voice(config-class)#h225 timeout tcp establish 2
2600_Voice(config-class)#exit
نربط voice class مع dial-peer
2600_Voice(config)#dial-peer voice 102
2600_Voice(config-dial-peer)#voice-class h323 10
2600_Voice(config-dial-peer)#exit
سامحونا على الأخطاء الإملائية
أخوك محمد
المفضلات