PC Preparation
1. Install IPBlue on your workstation. This part really shouldn’t require much of an explanation. You will need to download VTGO Lite.
download softphone from here:
https://www.ipblue.com/download.asp?product=vtgo
Watch the Video :
https://www.blindhog.net/tutorials/v...ue-install.htm
2.If your PC does not have multiple NICs, you can use MS Loopback adapters. (If you do have multiple nics, this part is not necessary.)
* Go to Start > Control Panel
* Click ‘Add Hardware’
* Click ‘Next’
* Select ‘Yes, I already have a connection’
* Select ‘Add a new hardware device’
* Select ‘Install from a list’
* Click ‘Network Adapters’
* Select Microsoft Loopback
* Click ‘Next’
* Click ‘Next’
* Click ‘Finish’
* Double-Click ‘Network Connections’
* Rename the loopback interface to something descriptive.
Watch the Video :
https://www.blindhog.net/tutorials/v...e-loopback.htm
3.Gather the MAC addresses for PC interfaces using the ‘ipconfig /all’ command
Watch the Video
https://www.blindhog.net/tutorials/v...ipblue-mac.htm
Basic Phone configs in Call Manager and IP Blue
1. Configure two ip phones in the CUCM server or turn on auto registration
* Configure the MAC address
* Select the default phone button template
* Select the default device pool
* Select the default device security profile
* Add a new dn and give it an extension
Watch the video :
https://www.blindhog.net/tutorials/v...pblue-cucm.htm
Run multiple IPBlue Softphones
1. Create a new IP Blue shortcut with the ‘/d’ option following the softphone executable.
2. Open the IP Blue Softphone
3. Change the phone options
* Set the TFTP Server to the ip address of your CUCM server
* Set the MAC Address with the Network interface option
* Set the Primary Call Manager
* Select an IP Phone model to emulate
4. Open the Windows registry editor (Click Start > Run and type regedit)
5. Export the Phone settings
* Navigate to the HKEY_LOCAL_USER\Software\IPBlue branch
* Right-Click on the IPBlue folder and select ‘Export’
* Give the registry file a descriptive name and click ‘Save’
6. Repeat Steps 3-5 for each virtual phone you would like to use.
7. Double-Click one of the .reg file for one of the softphones saved in steps above.
8. Open the IP Blue Softphone.
9. Double-Click another .reg file for one of the softphones saved in steps above.
10. Open the IP Blue softphone again. (The IPBlue software references the settings in the system registry during startup)
Watch the video:
https://www.blindhog.net/tutorials/v...lue-ipblue.htm
How to run multiple IP Blue phones on a single PC
المفضلات