اخى العزيز هذه هى الكونفجريشن الخاصة بى ال fxs بس لزم تعرف كل امر بيعمل ايه مش عارف اذا كانت هذه الاوامر هتكفيك ام لا اما بالنسبة لى الاعدادت الخاصة بى dsl معرفهاش
FXS port configuration
#Voice-port 1/0/0 → to access the port
#signal loop-start → to connect phone to phone if it was groud-start that to connect pbx to pbx or to end telpohne
#cptone GB → type of the tone
#ring cadence pattern01 → sound of the tone ring
FXS port configuration
#voice-port 1/0/0 → to access the port
#signal loop-start → to connect the port to a PSTN line
#ring number 3 → sets fxo port to answer after three rings
#dial-type dtmf → specifies dial-type to be DTMF
اخى انصحك بخصوص ال fxs ان تشاهد ملفات الفديو الخاصة بشرح الكونفجريشن بتعها وهيه موجودة فى المنتدى فى قسم ال ccvp باسم Knowledgenet
المفضلات