المشاركة الأصلية كتبت بواسطة NIGHT CROSSING
Rampage Extreme 1202 Bios Template
Extreme Tweaker
Ai Overclock Tuner [Manual,Auto,X.M.P,CPU Level Up,Memory Level Up]
OC From Memory Level Up [Auto,PC3-11600,PC-12800]
FSB Frequency []
CPU Ratio Setting []
> CPU configuration
CPU Ratio Setting []
C1E Support [Disabled,Enabled]
CpU TM Function [Disabled,Enabled]
Max CPUID Value Limit [Disabled,Enabled]
Vanderpool Technology [Disabled,Enabled]
Execute Disable Bit [Disabled,Enabled]
Core MultiPprocessing [Disabled,Enabled]
* CPU clock skew []
* NB clock skew []
FSB Strap to North Bridge [Auto,200,266,333,400]
PCIE Frequency [100]
DRAM Frequency []
DRAM Command Rate [Auto,1N,2N]
DRAM Timing Control [Auto,Manual]
1st information
CAS# Latency []
RAS# to CAS# Delay []
RAS# PRE Time []
RAS# ACT Time []
RAS# to RAS# Delay [Auto]
REF Cycle Time [Auto]
WRITE Recovery Time [Auto]
READ to PRE Time [Auto]
2nd information
READ to WRITE Delay(S/D) [Auto]
WRITE to READ Delay(S) [Auto]
WRITE to READ Delay(D) [Auto]
READ to READ Delay(S) [Auto]
READ to READ Delay(D) [Auto]
WRITE to WRITE Delay(S) [Auto]
WRITE to WRITE Delay(D) [Auto]
3rd information
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
PRE to PRE Delay [Auto]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]
DRAM Static Read Control [Auto,enabled,disabled]
DRAM Dynamic Write Control [Auto,enabled,disabled]
> DRAM Skew Control :
DRAM CMD Skew on Channel A [Auto]
DRAM CLK Skew on DIMM A1 [Auto]
DRAM CLK Skew on DIMM A2 [Auto]
DRAM CTL Skew on DIMM A1 [Auto]
DRAM CLT Skew on DIMM A2 [Auto]
DRAM CMD Skew on Channel B [Auto]
DRAM CLK Skew on DIMM B1 [Auto]
DRAM CLK Skew on DIMM B2 [Auto]
DRAM CTL Skew on DIMM B1 [Auto]
DRAM CTL Skew on DIMM B2 [Auto]
Ai Clock Twister [Auto,Lighter,Light,Moderate,Strong,Stronger]
Ai Transaction Booster [Auto,Manual]
(-- Manual --)
Common Performance Level []
Pull in of CHA PH1 [Disabled]
Pull in of CHA PH2 [Disabled]
Pull in of CHB PH1 [Disabled]
Pull in of CHB PH2 [Disabled]
(-- Manual --)
EPU II Phase Control [Auto,Full Phase]
*** Please key in numbers or select voltage!***
CPU Voltage []
Load-Line Calibration [Auto,Disabled,Enabled]
CPU PLL Voltage []
FSB Termination Voltage []
CPU GTLVref(0) [Auto]
CPU GTLVref(1) [Auto]
CPU GTLVref(2) [Auto]
CPU GTLVref(3) [Auto]
NB GTLVref [Auto]
North Bridge Voltage []
DRAM Voltage []
NB DDRVref [Auto]
DDR3 Channel A Vref [Auto]
DDR3 Channel B Vref [Auto]
South Bridge 1.5 Voltage []
South Bridge 1.05 Voltage []
******************************************
CPU Spread Spectrum [Auto,Disabled]
PCIE Spread Spectrum [Auto,Disabled]
المفضلات