بسم الله والحمد لله والصلاة والسلام علي رسول الله وآله وصحبه وإخوانه أجمعين
أخي الكريم قم بتعديل الspeed أولاً إلي 100 ثم قم بتعديل الdublex إلي full
ولا حظ معي:
Router(config)#inter f1/1
Router(config-if)#duplex full
Duplex will not be set until speed is set to non-auto value
Router(config-if)#speed 100
Router(config-if)#duplex full
Router(config-if)#exit
Router(config)#do show inter f1/1
FastEthernet1/1 is up, line protocol is down
Hardware is Fast Ethernet, address is c200.05b0.f101 (bia c200.05b0.f101)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
ولا تنسني من صالح الدعاء
وصلي الله وسلم وبارك علي المصطفي وآله وصحبه وإخوانه أجمعين
المفضلات