CISCO IOS BASED HARDWRAE BOOT

[ali algily]

QUESTION NO: 31 DRAG DROP

As a TestKing.com instructor you are required to place the following items to the Correct order they are used when Cisco IOS based hardware is booted

هل هذه الاجابة صحيحة.... اذا كان الجواب بنعم فارجو الشرح


1- NVRAM
2- FLASH
3- TFTP
4- ROM

في اعتقادي هي :


1- ROM
2-FLASH
3-TFTP
4-NVRAM

ارجو الافادة...(H)

[kathem77]

/Brother

The TestKing answer is correct
please find the notes from Cisco :

Global configuration mode boot system commands can be specified to enter fallback sources for a router to use in sequence. The router will use these commands as needed when it restarts.
If NVRAM lacks boot system commands that a router can use, the system will use the Cisco IOS software in flash memory by default.
If flash memory is empty, a router will try to use TFTP to load an IOS image from the network. The router will use the configuration register value to form a filename from which to boot a default system image that is stored on a network server.
If a TFTP server is unavailable, the router will load the limited version Cisco IOS software image stored in ROM.

salam / kathem /Iraq