السلام عليكم
يعطيكوا العافية
انا في عملت كنفجريشن لكول منجر في موقعين متصلات باستخدام ipvpn الاتصالات الداخلين في الموقعين تمام ما في مشاكل
لكن الاتصال بين الموقعين بعطي بيزي كول :
ما هو الحل لهذه المشكلة
وشكرا
السلام عليكم
يعطيكوا العافية
انا في عملت كنفجريشن لكول منجر في موقعين متصلات باستخدام ipvpn الاتصالات الداخلين في الموقعين تمام ما في مشاكل
لكن الاتصال بين الموقعين بعطي بيزي كول :
ما هو الحل لهذه المشكلة
وشكرا
www.arabfreemarket.com
وان فشلت بكسر القيد علي انجح غدا
يا هذه يهديك ربك فارجعــيالقدس تصرخ تستغيثك فاسمعيوالجنب مني بات يجفو مضجعيفالموت خير من حياة الخنــعولذا فشــدي همتي وتشجعـي
و عليكم السلام و رحمه الله,
ممكن توضح اكتر من كده:
1- الموقعين شاغلين على كول مانجر واحد , او كل واحد ليه الكول مانجر بتاعه, ولا ده كلستر اوفر وان يعنى ال Publisher فى موقع و ال Subscriber فى موقع تانى, او موقع كول مانجر و التانى Call manager Express.
2- ما هى التكنولوجى المستخدمه لربط الفرعين H323 or SIP.
3- كان شاغل قبل كده وبطل يشتغل ولا ده اول مره تشغله.
..............................etc
Please give full info to be able to support you.
سبحان الله وبحمده سبحان الله العظيم
شكرا جزيلا اخ نبيل على الرد
اجوبتي على استفساراتك:
1- المستخدم في الموقعين Call manager Express
كل موقع يوجد فيه Call manager Express
2- h323
3- اول مره تم تشغيلهن
واذا فيه امكانية ابعثلك الكنفجريشن للموقعين على الخاص
وشكرا
www.arabfreemarket.com
وان فشلت بكسر القيد علي انجح غدا
يا هذه يهديك ربك فارجعــيالقدس تصرخ تستغيثك فاسمعيوالجنب مني بات يجفو مضجعيفالموت خير من حياة الخنــعولذا فشــدي همتي وتشجعـي
Sorry for writing English, but it's more easy for me than Arabic as I am taking to much time to write in Arabic , anyways I will give you an example with some hints, if that didn't work you can send me the Config.
Example:
I am having Site A and Site B
Site A: Extension Range 1XXX, if we say that we will use the Loopback interface as an IP between the sites ex. 10.1.1.1
Site B: Extension Range 2XXX, Loopback interface IP 10.1.1.2
Hint: The most important thing that I need you to try it, is to make sure that there is connectivity between the sites using the Loopback interface (I mean the interface responsible for dial-peer config).
ex: Go to Site A router (10.1.1.1) then try to ping site B using site A IP: Ping 10.1.1.2 source 10.1.1.1 , then;
Go to Site B router (10.1.1.2), try to ping site A: Ping 10.1.1.1 source 10.1.1.2
After that the connectivity is okay, then I will start the configuration.
In Order to make Site A calls site B(2XXX):
Router A:
SiteA (config)#
Dial-peer voice 1 voip (1 is the tag number and make sure that Dial-peer 1 is not conf before, otherwise choose another number)
Destination-pattern 2... (2... it means the other site pattern)
Session target ipv4:10.1.1.2 (The Ip of the other site that I tried to ping it before)
In Order to make Site B calls site A(1XXX):
Router B:
SiteB (config)#
Dial-peer voice 1 voip (No problem to make it 1 as the router A as they are different routers)
Destination-pattern 1... (1... it means the other site pattern)
Session target ipv4:10.1.1.1 (The Ip of the other site that I tried to ping it before)
If all of that didn't help please ask me to give you my email so you send me the config files.:ah2:
السلام عليكم
انا عندي نفس السيناريو ولكن كول مانجر في موقع والربط ipvpn والموقع الأخر callmaanger express وكانت اعداداته بسيطة جدا وهي اعدادات trunk on the call manger لإرسال المكالمة الي راوتر الموقع الأخر وعgd راتر الموقع الأخر اعدادات dial peer لإرسال المكالمات للكول مانجر لو حبيت ابعت ليك تفاصيل الإعدادات عندي ابعت لياايميللك ابعتها ليك لانه انا خارج موقع العمل الن ومش هقدر ابعتها ليك الأن
الاخ عمر اعمل confugration لكل من الروتر 1 والروتر 2 dial-peer
[IMG]908297_513423898721362_1430514675_n[/IMG]
المفضلات